Miele CSDA 7001 FL SmartLine Element
Downdraft Extractor for Extraction or Recirculation Operation
EAN: 4002516304906 / Material number: 11402230 / Old Material Number: 27700150GB
Key Features
- Intuitive quick selection via number sequences – Smart Select ?
- Elegant design – for flush or raised installation
- Seamlessly integrates with any SmartLine element
- Efficient filtration – 10-ply stainless-steel grease filter
- Energy-efficient and quiet – powerful ECO motor
Technical Specifications
| Feature | Specification |
|---|---|
| Construction Type | Downdraft extractor |
| Operating Modes | Extraction or Recirculation |
| Type of air guide | Can be retrofitted |
| Flat ducting components (order separately) | DFK-xxxx |
| Recirculation conversion kit (order separately) | DUU 1000-2 |
| Design | Flush, Frameless - surface-mounted |
| User Convenience | Operation via sensor controls (Smart Select) |
| Digital power level display | Yes (Yellow display) |
| Run-on time | 5 min. |
| Easy-to-clean canopy interior | CleanCover ✔️ |
| Efficiency and Sustainability | Energy efficiency class (A+++ - D): A++ |
| ECO motor | Yes |
| Annual energy consumption (kWh/year) | 25.3 |
| Fluid dynamic efficiency class | A |
| Lighting efficiency class | NA |
| Grease filtering efficiency class | B |
| Cleaning and Care | Easy to clean ceramic glass ✔️ |
| Filter System | 10-ply stainless steel grease filter (dishwasher-safe) |
| Number of grease filters | 1 |
| Exhaust Air Performance (according to EN 61591) | |
| Air throughput in Level 1 (m³/h) | 150 |
| Air throughput in Level 2 (m³/h) | 290 |
| Air throughput in Level 3 (m³/h) | 440 |
| Sound power in Level 2 (dB(A) re 1 pW) according to EN 60704-3 | 58.0 |
| Sound pressure in Level 1 (dB(A) re 20 µPa) according to EN 60704-2-13 | 29.0 |
| Sound pressure in Level 2 (dB(A) re 20 µPa) according to EN 60704-2-13 | 43.0 |
| Sound pressure in Level 3 (dB(A) re 20 µPa) according to EN 60704-2-13 | 51.0 |
| Sound pressure in Booster level (dB(A) re 20 µPa) according to EN 60704-2-13 | 55.0 |
| Recirculation Performance (according to EN 61591) | |
| Air throughput in Level 1 (m³/h) | 100 |
| Air throughput in Level 2 (m³/h) | 235 |
| Air throughput in Intensive level (m³/h) | 460 |
| Air throughput in Level 3 (m³/h) | 380 |
| Sound power in Level 1 (dB(A) re 1 pW) according to EN 60704-3 | 49.0 |
| Noise power level in Intensive level (dB(A) re 1 pW) according to EN 60704-3 | 78.0 |
| Safety | Safety switch-off ✔️, FlameGuard ✔️ |
| Technical Data | |
| Dimensions in mm (width) | 120 |
| Dimensions in mm (height) | 168 |
| Dimensions in mm (depth) | 520 |
| Cutout dimensions in mm (width) with surface-mounted installation | 100 |
| Cutout dimensions in mm (depth) with surface-mounted installation | 500 |
| Inner cut-out dimensions in mm (width) with flush installation | 100 |
| Casing height incl. connection box in mm | 168 |
| Inner cut-out dimensions in mm (depth) with flush installation | 500 |
| Weight in kg | 11 |
| Outer cut-out dimensions in mm (width) with flush installation | 124 |
| Outer cut-out dimensions in mm (depth) with flush installation | 524 |
| Total rated load in kW | 0.17 |
| Voltage in V | 230 |
| Fuse rating in A | 10 |
| Number of phases | 1 |
| Length of supply lead in m | 2 |
| Installation Notes | Plinth fan with vent connection ✔️, Extraction connection at rear and side ✔️ |
| Dimensions of the exhaust ducting connector in mm | 222 |
| Dimensions of the exhaust ducting connector in mm | 89 |
| Accessories Included | Ducting system to the plinth fan ✔️ |
| Optional accessories | Active charcoal filter: DKF 1000 R |
Installation Diagrams Description
The following describes the installation configurations based on the provided diagrams:
CSDA 7001 FL - Flush Installation
This configuration shows the downdraft extractor integrated flush with the countertop surface. Key dimensions and components are illustrated:
- Unit Dimensions: Width 120 mm, Depth 520 mm.
- Cutout Dimensions: Width 100 mm, Depth 500 mm. Corner radius R4.
- Clearances: Minimum 10 mm clearance above the unit. Recess depth of 10 mm for the main body and a specific front edge recess of 5.5+0.5/-0.5 mm with a 2 mm gap.
- Components: The diagram labels include: 1) Front panel, 2) Fan unit located in the plinth below the countertop, 3) Stepped cutout in the countertop, 4) A 12 mm wooden panel (not supplied), 5) Air duct connection, and 6) E-box for electrical connections.
CSDA 7001 FL - Supported Installation
This configuration illustrates the downdraft extractor mounted on top of the countertop surface. Key components are identified:
- Components: 1) Front panel, 2) Fan unit in the plinth, 3) Air duct, and 4) E-Box.
Plinth Blower for CSDA 7001
This diagram shows the dimensions and connection points for the separate plinth blower unit used with the CSDA 7001 extractor.
Related Installation Drawings (CS 7000 FL)
Diagrams for the CS 7000 FL model are also provided, showing similar flush and supported installation types, including a specific note for a Wok installation (*7+0.5 = CS7611). These illustrate the general principles of Miele's downdraft extractor installations.
Further Information
For more details, please visit: http://www.miele.co.uk
