Miele SmartLine Gas Hob – CS7151 FL
Design
- 288 mm width, black glass ceramic surface
- Enamelled cast iron ComfortClean pot rest
- Flush-fit or surface-mounted installation
Cooking Zone
- Single wok burner
- Wok ring for flat or round based wok
- Trivet for smaller pan
Controls
- Electronic ignition with single-hand operation
- High-quality metal rotary dial control
Output
- Supplied for connection to Towngas
- For pans 140-300mm Ø: 6000W
Safety
- GasStop flame failure monitor
Optional Accessories
- CSZL 7000 for installing several SmartLine units
Dimensions and Installation
Cut-out Dimensions (Surface-mounted)
Width: 268 mm
Depth: 500 mm
Diagram Description: Illustrates a rectangular cutout for surface mounting. Key dimensions shown are 268 mm width and 500 mm depth for the main opening. It indicates a 52 mm clearance at the front and a 10 mm clearance from the rear wall. The diagram also shows the hob's base with fixing clips and a space for the mains connection box.
Cut-out Dimensions (Flush-fit)
Width: 268/292 mm
Depth: 500/524 mm
Diagram Description: Depicts the cutout for flush-fit installation, showing a width of 268 mm or 292 mm and a depth of 500 mm or 524 mm. It details the recess required in the countertop, including specific measurements for the main opening, clearances from walls (10 mm rear, 50 mm side), and the location of fixing points. It also highlights the need for a 12 mm wooden support frame for certain worktop materials (solid wood, tiled, or glass) and shows the mains connection box and gas connection point (R ½ inch).
Installation Requirements
- Voltage 220-240 V, Rated load 20W
- Fuse rating 13 A, Electrical supply required
- Length of cable 2000 mm, Without plug
- Connection adapter/coupler from gas supply hose to appliance. Connection pressure: Towngas 12.5 mbar / 1.25 kPa
Appliance Dimensions
Width: 288 mm
Depth: 520 mm
Height (exclude pot rest): 112 mm
Height for gas governor: at least 120 mm
Minimum Safety Distance
- Space to rear wall: 50 mm
- Space to side /tall unit: 200 mm, and 300 mm on the opposite side
- Space below hob: 30 mm
- Space from hob to hood: min. 650 mm* (* depends also on cooker hood)
Contact Information
Miele (Hong Kong) Ltd
Manhattan Place, 41st Floor, 4101
23 Wang Tai Road,
Kowloon Bay,
Hong Kong
Tel: +852 2610 1331 Fax: +852 2610 1013
Notes
Please refer to installation instruction booklet for detailed installation requirement / installation of several SmartLine elements and information.
Due to continuous product improvement, Miele reserves the right to make changes to products and technical data without prior notice.
