Cooler Master MasterBox MB400L with ODD
Model: 512003360-GP V1.0 2020-01
1. Introduction
The MasterBox MB400L is a versatile computer case designed to accommodate your components. This guide provides information on its features and installation.
Package Contents
The package typically includes the following components:
- Case (MB400L)
- Accessory Kit (screws, standoffs, zip ties, etc.)
The accessory kit contains various parts labeled A through H, including:
- A: Standoffs (x1)
- B: Screws (x16)
- C: Screws (x8)
- D: Standoffs (x8)
- E: Drive rails (x4)
- F: Zip ties (x10)
- G: Thermal pad (x1)
- H: Screws (x2)
The following table lists the package contents in multiple languages:
| English (EN) | Package Content | Hungarian (HU) | A csomag tartalma |
|---|---|---|---|
| Arabic (AR) | حزمة للمحتوى | Indonesian (ID) | Isi Paket |
| Bulgarian (BG) | Съдържание на пакета | Italian (IT) | Contenuto della scatola |
| Simplified Chinese (CHS) | 零件包 | Japanese (JP) | パッケージ内容物 |
| Traditional Chinese (CHT) | 零件包 | Korean (KR) | 구성품 |
| Czech (CS) | Obsah balení | Dutch (NL) | Verpakkingsinhoud |
| German (DE) | Verpackungsinhalt | Polish (PL) | Zawartość opakowania |
| Greek (EL) | Πєрıє̧ó́ıєva žuокєuаoíac | Portuguese (PT) | Conteúdo da embalagem |
| Spanish (ES) | Contenido Paquete | Russian (RU) | Комплектация |
| French (FR) | Contenu de l'emballage | Serbian (SR) | Saržaj pakovanja |
| Persian (FA) | Turkish (TR) | Paket içeriği |
Installation Steps
Follow these steps for installing components:
Step 1: Removing Side Panel
To access the interior, remove the side panel by unscrewing the thumb screws at the rear of the case.
Illustration: A diagram showing the side panel being detached from the chassis by unscrewing two screws.
Step 2: Installing Motherboard
Place the motherboard onto the standoffs inside the case and secure it with screws.
Illustration: A diagram showing a motherboard being placed and screwed into the case.
Step 3: Installing Storage Drives (3.5" HDD / 2.5" SSD)
For 3.5" HDD:
Attach the drive rails (E) to the 3.5" HDD. Slide the HDD assembly into the drive bay until it clicks into place.
Illustration: A diagram showing a 3.5" HDD with rails attached, being inserted into a drive bay.
For 2.5" SSD:
Mount the 2.5" SSD onto the designated bracket using screws (C). Secure the bracket to the case.
Illustration: A diagram showing a 2.5" SSD being mounted on a bracket with screws, and then the bracket being attached to the case.
Step 4: Installing Expansion Cards (e.g., Graphics Card)
Remove the expansion slot covers from the rear of the case. Align the expansion card with the PCIe slot on the motherboard and press down firmly. Secure the card with screws.
Illustration: A diagram showing an expansion card being inserted into a motherboard slot and secured with screws.
Step 5: Installing Fans
The case supports various fan sizes, including 120mm and 140mm fans. Mount fans to the designated locations (front, rear, top) using screws.
Illustration: Diagrams showing fans being mounted at different locations within the case.
Step 6: Installing ODD (Optional)
If you are installing an Optical Drive (ODD), slide it into the 5.25" bay from the front and secure it with screws.
Illustration: A diagram showing an ODD being inserted into the 5.25" bay.
Warranty Information
Cooler Master provides a limited hardware warranty for its products.
Australia Only
This product comes with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Contact Information:
- Cooler Master Support: account.coolermaster.com
- For general warranty information: www.coolermaster.com/service/warranty.html
What Is and Is Not Covered
The warranty covers manufacturing defects under normal use. It does not cover damage resulting from accident, misuse, abuse, improper installation, unauthorized alterations, or acts of nature. Removal or alteration of product identification labels voids the warranty.
Limitations:
- The warranty is not an unconditional guarantee.
- Replaced parts become the property of Cooler Master.
- The warranty does not apply to software components.
- Damage from liquids or moisture is not covered.
- All accessories that malfunction due to physical damage are not covered.
Exclusion of Damages: Cooler Master's liability is limited to the cost of repair or replacement of the product. Cooler Master shall not be liable for any indirect, incidental, consequential, or special damages.
Warranty Procedures:
- Return the product to the shop where it was purchased with a valid invoice.
- The shop will assist with confirmation from the distributor for RMA claims.
- If the damage is due to natural causes, the distributor will handle replacement and repair.
- If the damage is caused by the consumer, all expenses will be covered by the consumer.
- For products with expired warranties, it is recommended to purchase a new product.
Warranty Period:
- All Chassis Series (Only Electronic Parts): 2 years
- Chassis + PSU (C+P): 1 year
Please refer to the user manual or Cooler Master's official website for specific warranty terms for other products.
Compliance Information
This personal computer case complies with safety standards. For the declaration of conformity, please visit www.coolermaster.com/service/doc.
