In Home F00099 Mirror Installation Guide

WARNING

1. Please read the instructions carefully and save them for future reference.
2. The mounting surface should be clean, dry, flat, strong enough, and at least 1/4” larger than the canopy on all sides. Any gaps between the mounting surface and canopy exceeding 3/16” should be corrected as required.
3. Ensure the ceiling or wall can support the weight of the mirror before installation.
4. The safety instructions in this manual are not exhaustive and may not cover all possible conditions. Common sense, caution, and care should be used with all products.

Image for Finished Product:

[Diagram of the finished mirror product]

Tools Required (Not Included):

Before starting assembly and installation, please prepare the needed tools as shown below.

• [Ladder icon] Ladder
• [Screwdriver icon] Philips Head or Flat Blade Screwdriver

Parts Type & Qty Including:

• (A) Wall anchor (5)
• (B) Hanging plate (1)
• (C) Self tapping screw (5)
• (D) Mirror (1)
• (E) Back plate (2)

Assembly & Installation Instructions:

Carefully remove the fixture from the carton and check that all parts and accessories are included as shown in the illustrations.

[Diagram showing installation step 1: attaching hanging plate to wall with anchors and screws]

[Diagram showing installation step 2: attaching mirror to hanging plate]

[Diagram showing mirror dimensions: 450mm width, 31mm depth]

[Diagram showing mirror being hung on the wall]

Ordering Parts

Keep this sheet for future reference in case you need to order replacement parts. All parts for this fixture can be ordered from the place of purchase. Be sure to use the exact wording from the illustration when ordering parts.

Cleaning

To clean, wipe the fixture with a soft cloth. Clean glass with a mild cleaner (such as mild and non-abrasive soap). Do not use abrasive materials such as scouring pads, powders, steel wool, or abrasive paper.