Installation Instructions for F00095 Mirror

WARNING

1. Please read these instructions carefully and save them for future reference.
2. Ensure the mounting surface is clean, dry, flat, and at least 1/4 inch larger than the canopy on all sides. Any gaps exceeding 3/16 inch between the mounting surface and canopy should be corrected.
3. Verify that the ceiling or wall can support the weight of the mirror before installation.
4. The safety instructions provided are not exhaustive and common sense, caution, and care should be exercised when using this product.

Image of Finished Product

The finished product is an arched mirror designed to be mounted on a wall.

Tools Required (Not Included)

Before starting assembly and installation, prepare the necessary tools:

• Ladder
• Philips Head Screwdriver
• Flat Blade Screwdriver

Diagram Description: The diagram shows a ladder, a Philips head screwdriver, and a flat blade screwdriver.

Parts Type & Quantity Including

• (B) Hanging plate (1)
• (D) Mirror (1)
• (E) Back plate (1)

Accessories & Quantity Enclosed

• (A) Wall anchor (3)
• (C) Self tapping screw (3)

Assembly & Installation Instructions

Carefully remove the fixture from the carton and check that all parts and accessories are included as shown in the illustration.

Diagram Description:

The first diagram shows a wall with a hanging plate (B) being attached. The plate is shown with dimensions 300mm and 31mm. The second diagram shows a wall anchor (A) being inserted into the wall, followed by a self-tapping screw (C) being used to attach the hanging plate.

The final diagram illustrates the mirror being hung on the installed back plate.

Ordering Parts

Keep this sheet for future reference if you need to order replacement parts. All parts for this fixture can be ordered from the place of purchase. Ensure you use the exact wording from the illustration when ordering parts.

Cleaning

To clean, wipe the fixture with a soft cloth. Clean the glass with a mild cleaner, such as mild and non-abrasive soap. Do not use abrasive materials such as scouring pads, steel wool, or abrasive paper.