electriQ E-SC10 Electric Scooter User Manual

Safety Warnings

• Carefully read the user manual before use to avoid the risk of injury. Keep the user manual safe for future reference.
• The scooter can only be used by people aged 14 years old and over. Persons with reduced physical, sensory or mental capabilities or who lack experience and knowledge can also use this scooter if they are supervised, or have been given the correct instructions concerning the use of the scooter and understand the hazards involved.
• Do not leave children unattended with the scooter.
• Cleaning and user maintenance must not be performed by a child under the age of 14 unless supervised by an adult.
• The user is responsible for all consequences from improper use of the scooter.
• The scooter is for personal use only, and must be operated in accordance with current local legislation.
• Only one person can use the scooter at a time.
• Inspect the scooter before use. Do not attempt operation if any damage is found or suspected.
• Keep fingers clear of the folding mechanism when folding or unfolding the electric scooter.
• Do not allow children to fold or unfold the scooter.
• This scooter is to be ridden responsibly. If you lose control, you could cause serious injury.
• Wear suitable clothing and footwear, including, but not limited to: flat shoes, helmet, knee protectors, and elbow protectors.
• Do not ride after consuming alcohol, or under the influence of drugs.
• Verify that use of the scooter is allowed in the area you wish to ride.
• Do not use the scooter at night, or when visibility is low.
• Always check the battery level using the display. If the battery is low, the scooter might stop suddenly and cause injury.
• The scooter is designed to be used on smooth flat ground.
• Do not use the scooter in wet conditions, including snow, mud, and ice.
• Maintain a slow speed if travelling downhill. Use both brakes together to stop from high speeds.
• Do not carry children while using the scooter.
• This scooter is not a toy.
• The maximum speed and range will be dependent on the weight and size of the user, as well as environmental conditions and driving style.
• Pictures and information in this manual may vary from the product, due to continuous product improvement.

Battery Safety

• The scooter comes supplied with a lithium battery. Care must be taken with the battery and charging to maintain its lifespan.
• Do not expose the scooter or battery to naked flames or extreme heat.
• Do not expose the scooter or battery to extreme cold.
• Do not allow moisture to enter the battery compartment or charging port.
• Only use the provided charger.
• Do not overcharge the battery or leave unattended whilst charging.
• The battery must be removed if disposing of the product.
• The battery is to be disposed of safely.
• Lithium batteries are considered dangerous goods. Check your country's laws on transportation and use.

Scooter Diagram

The diagram illustrates the electric scooter and its components. Key parts include:

• Handle: The part you hold to steer.
• LED Light: Front illumination.
• Handlebar Stem: Connects the handlebars to the main body.
• Handlebar Buckle: Secures the folded handlebar stem.
• Front Wheel: The front wheel of the scooter.
• Folding Hook: Used for folding the scooter.
• Hook Hole: Where the folding hook attaches.
• Rear Brake: The brake mechanism for the rear wheel.
• Rear Light: Rear illumination.
• Motor: Provides power to the scooter.
• Kickstand: Supports the scooter when parked.
• Charging Port: Where the charger connects.
• Deck: The platform where the rider stands.
• Buckle Lock: Secures the handlebar stem.

A close-up view of the handlebars shows:

• LCD Display: Shows speed, battery level, and mode.
• Electric Brake: A brake controlled by a lever on the handlebar.
• Accelerate Throttle: Controls the scooter's speed.

Assembly

Ensure that the mini scooter is fully assembled before operating.

Step 1: Detaching Handlebar Stem

Step on the deck of the unit and lift the handlebar stem firmly to detach it from the deck.

Step 2: Front Wheel Installation

Remove the rubber plugs on both sides of the front wheel forks. Unfasten the front axle using the two 6mm wrenches provided. When installing the front wheel, pay attention to the direction of the tread, ensuring it matches the diagram with the valve on the right. Once confirmed, tighten the front axle. Replace the rubber plugs on both sides of the front wheel forks.

Handle Assembly, Unfolding, and Folding

Handle Assembly

Fully tighten the handlebars onto each side of the handlebar stem, ensuring that the right handle is attached to the right side, and the left handle is attached to the left.

Unfolding Your Scooter

Lift up the handlebar stem until the folding hook releases from the hook hole on the back fender. Fully raise the handlebar stem, then lock it into place using the handlebar buckle. Ensure a clicking sound is heard and that the buckle is secure.

Folding Your Scooter

Carefully lift up the handlebar buckle, and pull it away from the handlebar stem. Then gently lower the handlebar stem until the folding hook is fixed securely into the hook hole.

Display Overview

The display shows key information about the scooter's status.

• POWER BUTTON [power-symbol]: Press and hold for 3 seconds to turn the scooter ON or OFF.
• HEADLIGHT [headlight-symbol]: Press the power button twice to turn the headlight on or off. The headlight symbol will illuminate on the display when the lights are on.
• MODE BUTTON [mode-button]: When the scooter is on, press the MODE button to change between speed modes: Low, Medium, and High. The currently selected mode is shown by the colour of the speed symbol.
• SPEED INDICATOR [speed-indicator]: The colour indicates the selected mode:
  • WHITE: Low speed mode, max speed is 10 km/h.
  • YELLOW: Mid speed mode, max speed is 20 km/h.
  • RED: High speed mode, max speed is 25 km/h.
• BATTERY LEVEL [battery-level-indicator]: The display indicates the current battery level. It is recommended to avoid riding when the battery level drops below 25%. The levels are shown as:
  • 75%-100%
  • 50%-75%
  • 25%-50%
  • 0%-25%

First Use

IMPORTANT: Before using the scooter for the first time, fully charge the battery. After turning on the scooter, check the battery power on the display and verify that all lights are working.

• Remove the protective cover from the charging port on the scooter.
• Ensure that the charging port is dry and not damaged before inserting the charger into the port.
• When the indicator on the charger is red, the scooter is charging.
• The indicator light on the charger will turn green when the battery is fully charged. This usually takes 5-6 hours.
• Do not overcharge, as long-term battery life may be affected. Do not leave unattended while charging.
• When charging is complete, remove the charger and ensure the protective cover is placed securely over the charging port.

How to Ride

IMPORTANT: Ensure all locking devices are secure and the scooter is stable before riding. This scooter is intended for personal use and should be operated responsibly. Adult supervision is required at all times.

1. Place one foot firmly on the deck, keeping your other foot on the ground for balance. Press the power button for 3 seconds to turn on the scooter.
2. Hold the handlebars with both hands and gently push the scooter forward. When you have gained a steady speed, gently press the accelerator and place both feet on the deck.
3. Press the mode button to change the max speed of the scooter. Refer to the display overview for more information.
4. Gently pressing the electronic brake and the rear brake will slow the scooter to a stop.
5. If the scooter displays that the battery is low, please charge the scooter. Do not run the scooter on low battery.
6. Press the power button for 3 seconds to turn off the scooter.
7. When the scooter has stopped, remove your feet one by one.

Maintenance

The scooter requires routine cleaning and maintenance.

• Before any work is carried out on the scooter, ensure that the charging cable is not connected and that the scooter is powered off.
• To clean the scooter, wipe the exterior with a soft damp cloth, then dry immediately.
• The exterior of the scooter is splash-proof with an ingress rating of IPX4. The scooter is water resistant, but not waterproof. Never submerge the scooter, and do not ride in heavily dusty areas. Care should be taken to avoid mud, large puddles, and adverse weather.
• Do not allow water to get inside the scooter, as there is a high risk of permanent damage to internal electronics.
• The tyres on the scooter must be regularly checked for damage.

Storage

• To protect the battery, ensure it is charged for at least an hour before storage. If you plan on storing the scooter for a prolonged period, the scooter should be charged every 2 months to avoid deterioration of the battery. Do not store the scooter at temperatures below 7°C or above 25°C.
• Keep the scooter inside its own packaging, or cover it to prevent dust build-up.
• Keep the scooter indoors at all times when not in use.

Technical Specifications

Battery Specifications

electriQ UK Support

For support, please contact:

• Phone: 0330 390 3061
• Office hours: 9 AM - 5 PM Monday to Friday
• Website: www.electriQ.co.uk
• Address: Unit J6, Lowfields Business Park, Lowfields Way, Elland, West Yorkshire, HX5 9DA

Product Disposal

Do not dispose of this product as unsorted municipal waste. Collection of such waste must be handled separately as special treatment is necessary. Recycling facilities are now available for all customers at which you can deposit your old electrical products. Customers will be able to take any old electrical equipment to participating civic amenity sites run by their local councils. Please remember that this equipment will be further handled during the recycling process, so please be considerate when depositing your equipment. Please contact the local council for details of your local household waste collection service.

The product is marked with a symbol [crossed-out-bin-symbol] indicating it should not be disposed of with general household waste.

EU Declaration of Conformity

Company Name: Buy It Direct

Postal Address: Unit J6, Lowfields Way, Elland, West Yorkshire, HX5 9DA

Postcode: HX5 9DA

Telephone Number: 0871 620 1057

E-mail Address: Compliance@BuyltDirect.co.uk

This declaration of conformity is issued under our sole responsibility and belongs to the following product:

• Type of product: Electric Scooter
• Model Number: E-SC10
• Brand: electriQ
• Object of Declaration: electriQ Electric Scooter

The object of the declaration described above is in conformity with the relevant Union harmonisation legislation:

• Low Voltage Directive 2014/35/EU
• Machinery Directive 2006/42/EC
• EMC Directive 2014/30/EU
• RoHS Directive 2011/65/EU

Relevant harmonised standards used or other technical specifications in relation to which conformity is declared:

Authorised Signature:

Richard Leach
Compliance and Quality Manager
13th November 2020