VOVO GO Portable Bidet User Manual

Safety Precautions

Do not use with anything other than municipal water, drinking water, or purified water. Do not use hot water above 40°C. Do not insert the nozzle into the body. Do not use the battery incorrectly. Do not attempt to disassemble or repair the unit yourself; only a qualified service technician should perform repairs. In case of malfunction, stop using immediately and remove the battery. Do not use if the product is cracked or severely damaged. When cleaning the main unit or water tank, use only tap water; do not use detergents, bleach, or chemicals like benzene. If not using for a long time, please remove the batteries. Keep out of the reach of small children.

Part Names

Battery Cover: The cover for the battery compartment.

Bidet Main Body: The primary unit of the bidet.

Water Tank: Holds the water for cleansing.

Nozzle: The part that dispenses water.

Water Tank Lid: Covers the water tank opening.

3-hole nozzle: For stronger water pressure, switch to this nozzle.

Battery Installation

1. Rotate the battery cover to the right to detach it.

2. Insert the batteries, ensuring the + and - are in the correct positions.

3. Rotate the battery cover to the left to secure it.

Bidet Preparation

1. Open the water tank lid.

2. Hold both the tank and the bidet body, and slide them together until they are securely connected in a straight line.

A. If the lid is not open, use may be difficult due to internal pressure. After filling, securely close the lid to prevent leaks.

B. If the water tank and bidet body are not properly connected, the tank may shrink due to pressure during use.

You can use both warm and cold water.

Easy Use

1. Lift the end of the nozzle and fully extend it.

2. To easily press the button, hold the water tank facing upward to prevent dropping it.

3. Position the bidet so the nozzle reaches the area you want to cleanse, either in front of or behind your body, and press the button to use it.

Please hold the water tank upright to ensure the pump fills properly.

Clean Up After Use

1. After use, drain the remaining water from the tank and retract the nozzle.

2. If any foreign substances are present, clean them off thoroughly.

3. Insert the water tank and bidet main body into each other and secure them together. After securing, close the water tank lid. It may be difficult due to pressure.

4. After removing the remaining water from the water tank, open the lid and allow it to dry. Remaining water and moisture inside the tank can cause stains and odors. After use, remove moisture and store the case to prevent it from getting wet.

Post-use Maintenance and Filter Cleaning

1. Use a soft cloth to clean the water tank and bidet main unit.

2. Use a toothbrush to clean the nozzle grooves, removing any dust or residue.

3. Insert a toothbrush or small paintbrush into the water tank opening to clean the filter. It is recommended to clean the filter once a month to ensure proper water pressure.

4. Do not use any detergents other than tap water when cleaning the main unit or water tank.

5. Ensure no foreign substances enter the water tank from sources other than tap water, drinking water, or purified water.

Product Specifications

• Model: VOVO GO
• Power: 2 AAA Alkaline Batteries
• Water Tank Capacity: 140ml / 5 oz
• Filter: Yes
• Waterproof Rating: IPX6
• Weight (Excluding batteries): 220g / 0.48lb
• Size (When stored / When in use): 43 x 43 x 152mm / 43 x 43 x 352mm (1.7 x 1.7 x 6in / 1.7 x 1.7 x 13.8in)
• Warranty Period: 1 year from the date of purchase

Warranty and Support

Please register your product at the official VOVO website to receive warranty benefits. This product is covered by a 1-year limited warranty from VOVO.

For US customers: Register at www.vovo-us.com/pages/register. Customer Support: support@vovousa.com

For EU customers: Register at www.vovo-eu.com/pages/product-registration. Customer Support: support@vovoeu.com

For JP customers: Register at https://vovo-jp.com/pages/product-registration. Customer Support: support@vovojp.com