REHAU ABS/PVC Edgeband Standard Tolerances
Standard Tolerances for ABS/PVC Edgebands
This document details the standard tolerances for REHAU ABS/PVC edgebands across various dimensions and properties.
Width (b) in mm / Ancho (b) en mm / Largeur (b) en mm / Width (b) in mm / Largura (b) em mm / 宽度(b) mm
| Width Range (mm) | Tolerance for thickness ≤ 1mm | Tolerance for thickness > 1.01mm |
|---|---|---|
| ≥ 10.00 - 17.00 | ± 0.20 | ± 0.30 |
| ≥ 17.01 - 33.00 | ± 0.50 | ± 0.40 |
| ≥ 33.01 - 45.00 | ± 0.80 | ± 0.50 |
| ≥ 45.01 - 75.00 | ± 0.80 | ± 0.50 |
| ≥ 75.01 - 104.00 | ± 0.80 | ± 0.50 |
Thickness (S) in mm / Espesor (s) en mm / Epaisseur (S) en mm / Thickness (S) in mm / Espessura (S) em mm / 厚度(s) mm
| Thickness Range (mm) | Tolerance |
|---|---|
| ≥ 0.40 - 0.80 | -0.15 |
| ≥ 0.81 - 1.60 | -0.15 |
| ≥ 1.61 - 2.70 | -0.25 |
| ≥ 2.71 - 4.00 | -0.30 |
Preliminary Tension in mm / Puente en mm / Précontrainte en mm / Preliminary tension in mm / Abaulamento em mm / 内弯弧度 mm
| Width Range (mm) | Tolerance for thickness ≤ 2.00mm | Tolerance for thickness ≥ 2.01mm |
|---|---|---|
| ≥ 10.00 - 17.00 | max. 0.20 | max. 0.15 |
| ≥ 17.01 - 23.00 | max. 0.25 | max. 0.20 |
| ≥ 23.01 - 33.00 | max. 0.30 | max. 0.30 |
| ≥ 33.01 - 75.00 | max. 1.00 | max. 0.60 |
| ≥ 75.01 - 104.00 | max. 2.00 | max. 1.50 |
Plane Parallelism in mm / Paralelismo en mm / Parallélisme des plans en mm / Plane parallelism in mm / Paralelismo em mm / 平行度 mm
| Thickness Range (mm) | Tolerance for width |
|---|---|
| ≥ 0.40 - 4.00 | 10.00-33.00: max. 0.05 33.01-45.00: max. 0.10 45.01-104.00: max. 0.15 |
Longitudinal Warpage in mm / Rectitud en mm / Contracción longitudinal en mm / Longitudinal warpage in mm / Empenamento em mm / 直率 mm
| Edgeband Thickness (mm) | Tolerance / Measurement Conditions |
|---|---|
| ≥ 0.40 - 0.80 | max. 20 mm/2m (free-storage / sans contrainte / free-storage / sem tensão) |
| ≥ 0.81 - 1.70 | max. 10 mm/ 2 m (free-storage / sans contrainte / free-storage / sem tensão) |
| ≥ 1.71 - 4.00 | max. 8 mm /2m (free-storage / sans contrainte / free-storage / sem tensão) |
For special dimensions, the relevant drawing will be valid. For special dimensions, the relevant drawing will be valid. For special dimensions, the relevant drawing will be valid. For special dimensions, the relevant drawing will be valid. For special dimensions, the relevant drawing will be valid. For special dimensions, the relevant drawing will be valid.
Disclaimer and Copyright
This document is protected by copyright. All rights reserved. REHAU's advice, whether verbal or written, is based on years of experience and standardized assumptions and is provided to the best of its knowledge. The intended use of REHAU products is comprehensively described in the technical product information. The latest version can be viewed at www.rehau.com/TI. REHAU has no control over the application, use, or processing of its products. Responsibility for these activities rests entirely with the respective user/processor. Any liability claims are governed exclusively by REHAU's terms and conditions, available at www.rehau.com/conditions, unless otherwise agreed in writing with REHAU. This also applies to warranty claims, with the warranty covering the consistent quality of REHAU products in accordance with specifications. Subject to technical changes.
Contact Information:
REHAU Industries SE & Co. KG
Helmut-Wagner-Straße 1
D-95111 Rehau
www.rehau.com
FS-D+P-TECH
H. Affeldt 1472 / H. Hacker 2348
Stand 07.2025
Related Documents
 |
REHAU ABS/PVC Edgeband Standard Tolerances Technical specifications detailing standard tolerances for REHAU ABS/PVC edgebands, covering width, thickness, preliminary tension, plane parallelism, and longitudinal warpage. |
 |
Standard Tolerances for REHAU PP Edgebands with Functional Layer This document outlines the standard tolerances for REHAU PP edgebands featuring a functional layer, covering dimensions such as width, thickness, layer thickness, preliminary tension, plane parallelism, and longitudinal warpage. It provides detailed tables with specific tolerance values for various measurements in millimeters. |
 |
REHAU PP/PMMA Edgeband Standard Tolerances This document outlines the standard tolerances for REHAU PP/PMMA edgebands, covering width, thickness, preliminary tension, plane parallelism, and longitudinal warpage. It provides detailed specifications in millimeters for various dimensions and conditions, with information presented in multiple languages. |
 |
REHAU PP/PMMA Edgeband Standard Tolerances Technical specifications for REHAU PP/PMMA edgebands, detailing standard tolerances for width, thickness, preliminary tension, plane parallelism, and longitudinal warpage. |
 |
REHAU PMMA Edgebands with Functional Layer: Standard Tolerances This document outlines the standard tolerances for REHAU PMMA edgebands featuring a functional layer, providing detailed specifications for width, thickness, layer thickness, pre-tension, plane parallelism, and longitudinal warpage in multiple languages. |
 |
REHAU ABS+PVC Edgeband Standard Tolerances with Functional Layer This document outlines the standard tolerances for REHAU ABS+PVC edgebands with a functional layer, covering dimensions, layer thickness, and parallelism for various applications. It provides detailed specifications in multiple languages to ensure clarity for global users. |
 |
Guía de Cubrecantos REHAU Duraplay Información sobre la gama de cubrecantos REHAU Duraplay, incluyendo materiales, dimensiones, códigos de producto y datos de contacto para ventas y servicio al cliente. |
 |
RAUKANTEX Technical Delivery Specifications | REHAU Comprehensive technical delivery specifications for REHAU RAUKANTEX edgebands, detailing material properties, applications, processing, and compliance. |