Mac / PC ADAPTER for edelkrone MOCO

Before operating your edelkrone, please watch the user's manual video from the link below:

http://edel.kr/lad

Table of Contents

• 1. WHAT'S IN THE BOX & THE BASICS
• 2. edelkrone SDK SETUP
• 3. CONNECTIONS
• 4. WIRED SIGNAL HUB for edelkrone MOCO

1. WHAT'S IN THE BOX & THE BASICS

The Mac/PC Adapter package includes the following items:

• 1. Mac/PC Adapter
• 2. Adjustment Wheel
• 3. USB Type B port
• 4. RJ45 Link port
• 5. 3.5mm Link port
• 6. USB Type A to Type C Converter
• 7. USB Cable Type A to Type B (1.5m)
• 8. RJ45 Link Cable (2.5m)
• 9. 3.5mm to 3.5mm Link Cable (3m)

The adapter features several ports for connectivity:

• USB Type B port: For connecting to a computer via USB.
• RJ45 Link port: For connecting edelkrone motion units.
• 3.5mm Link port: For connecting edelkrone motion units.

An adjustment wheel is also included for manual control.

2. edelkrone SDK SETUP

To set up the edelkrone SDK for your Mac/PC Adapter, follow these steps:

1. Download the edelkrone Software Development Kit to your computer from: http://edel.kr/sdk. This is available for Windows, macOS, and Linux.
2. Open the downloaded file to install the software.
3. Follow the on-screen installation instructions.
4. Open the edelkrone SDK and follow its instructions to connect your Mac/PC Adapter to your computer.

For more information and tips about the edelkrone SDK, please visit the software page: http://edel.kr/sdk.

3. CONNECTIONS

After installing the edelkrone SDK, connect your Mac/PC Adapter to your computer using a USB cable. If your computer lacks a standard USB-A port, you can use the included USB A to USB C converter.

Connection Options:

• RJ45 Link Port: Use this port to connect devices like HeadPLUS v1 and HeadPLUS v1 PRO.
• 3.5mm Link Port: Use this port for edelkrone motion units that feature a 3.5mm Link Port.
• Wireless Connection: Connect to the Mac/PC Adapter wirelessly with edelkrone motion units that are supported by the edelkrone App.

You can find a list of edelkrone motion units supported by these ports at: http://edel.kr/sdk.

4. WIRED SIGNAL HUB for edelkrone MOCO

The Wired Signal Hub for edelkrone Moco allows you to connect up to 5 edelkrone motion control devices via cable connections. All ports on the hub can function as either inputs or outputs.

The Wired Signal Hub for edelkrone Moco is sold separately.

DISPOSAL OF THE PRODUCT & WARNINGS

Disposal: Should the product become damaged beyond repair, or if you wish to dispose of it, it must be disposed of separately from municipal waste. Use designated collection facilities appointed by the government or local authorities. Observe local and national regulations for electronic product disposal.

Warnings:

• Keep your Mac/PC Adapter away from all liquids.
• Do not attempt to disassemble or modify any internal parts of your Mac/PC Adapter. If the device malfunctions, discontinue use and contact support for qualified service.
• Never force a different type of connector into a port.
• Never use or store your Mac/PC Adapter in areas subject to extreme temperatures or high levels of vibration.
• Environmental factors such as dust or heavy resonance may affect performance. Keep your product away from environmental hazards. Do not use chemical materials to clean your product.
• Avoid dropping or causing physical damage to your Mac/PC Adapter.
• Do not place heavy objects on top of your Mac/PC Adapter.
• edelkrone cannot be held responsible for damage caused by improper use or modification of the product.
• Specifications: Rated Voltage: 5V, Rated Current: 1A, Operating Temperature: -5°C to +45°C.

For more information and tips about your Mac/PC Adapter, please watch the user's manual videos at: http://edel.kr/lad.