Instruction Manual for YINPAGE models including: Real 1 Pro, Real 1 Pro TWS Wireless Headset, TWS Wireless Headset, Wireless Headset, Headset
Yinbeiqi (Shenzhen) Technology Co., Ltd. REAL1PRO TWS Wireless headset 2BNT7-REAL1PRO 2BNT7REAL1PRO real1pro
87x80mm
1/3
1/3
Real 1 Pro
/
""APP
1. 2. 3.45 4. 5. 6. 7. 8.
9.
:
BL
BL
BL
BL
BL
BL
BL
BL
BL
BL
BL
BL
BL
BL
BL
BL
&
BL
NA
BL
BL
SJ/T11364 OL =BL =X =NA = GB/T 26572-2011
Fingerprint sensing area (1/3 position of headphone handle)
Fingerprint sensing area (1/3 position of headphone handle)
TWS Wireless headset
Real 1 Pro
instructions for use
Scan the QR code to download "YINPAGE"the APP
1. Power on/off; Connect to power on
1. Power on Take them out of the charging case and they will turn on automatically.
4. Product safety information
may cause damage to the product or personal safety.
1. The product contains batteries. Please do not expose this product to strong sunlight or overheating environments such as stoves. Do not store this product in high temperature, strong light or strong magnetic environments. 2. The product cannot be placed in harsh environments such as near fire sources. It is prohibited to knock, throw, trample, squeeze or throw it into fire; if it bulges, do not use it. 3. Product operating temperature: below 45. 4. Please do not violate the instruction manual and use it inappropriately, causing damage to the product or endangering personal and property safety. You will be responsible for the consequences. 5. Non-professionals are strictly prohibited from disassembling this product, otherwise it may cause a fire or even completely damage the product. 6. Do not use electrical appliances that exceed the current load of this product. If the load is exceeded, it will automatically stop working. 7. Please clean the charging contacts of the earphones regularly with a clean cotton cloth to avoid the inability to charge or turn on the earphones due to long-term uncleaning.
8. Do not place this product in water (or in a washing machine). If the product gets water, please wait for it to dry naturally before using it. 9. Keep moisture-proof bags, deodorizing beads and other accessories out of the reach of children to prevent accidental ingestion; do not place them in water to avoid violent chemical reactions that may affect personal and property safety. You are responsible for the consequences.
Declaration of Hazardous Substances in Elcitronic Information Products:
Hazardous substances or elements plastic parts metal parts circuit board
cable
Pb
BL
BL
BL
BL
Hg
BL
BL
BL
BL
Cd
BL
BL
BL
BL
Cr^6+
BL
BL
BL
BL
PBBS&PBDEs
BL
BL
BL
BL
This form is prepared in accordance with SJ/T11364. Note: OL = Out of limits, BL = Below limits, X = Not sure, NA = Not applicable.
2. "YINPAGE Real 1 Pro"
3. 5
/
/
/
/ /
/
/
/
ANC
*1
*1 L/R (
L/R
/ /
*1 /*1
3.2V
(5)
3.1V
3
1.DUT7/15
2.// 1s
15
2. connect
When connecting the device for the first time,
please take out both earphones at the same
time, open
your
phone and search
for
"YINPAGE Real 1 Pro" to connect. After the
connection is successful, there is no need to
connect again for subsequent use.
3.Power off The earphones can be turned o ffand charged when placed in the charging compartment. Note: Bluetooth is not connected and will automatically shut down after 5 minutes.
2. Functional operation
Key Function
Answer/ hang up
Play / Pause
manipulate click click
Prompt tone
Indicator Lights
/
//
3.2v
3.1v
8/
5
3
1s
30
TYPE-C
8~10
90
--38(±2) dB
40mAh
400mAh
10M
6~8
10mm
2
20-20000HZ
3. 12 -
1. 2. 3. 4. 5. 6. 7. 8.
400-808-2787
() 5A 400-808-2787
GB 4943.1-2022 1 :
Do not answer the phone.
long press
next song
Double click on the right ear
game mode
Double click on the right ear
Game Mode/ Music M ode
voice assistant
three- strike
noise reduction mode
Low Power Alarm
long press
W hen the battery voltage is below 3.2v
Normal/T hrough /Noise Reduction
chord tone
Low power shut down
W hen the battery voltage is lower than 3.1v, the
headsetwill automatically shut down.
chord tone
W hite light flashes 3 times
Restore Factory Settings
B luet oot h disc onnec t ed st at e, long pre ss t heheadset f or 8 s ec onds t o re set a nd re st art , ingle/binaural c an be o perat ed. C lear c ell phone p airing inform at ion and pairing t eam a ft er re set
Headset C harging
Headphones charge aut om at ic ally
when placed in the charging case
W hite/ice blue light on simultaneously
for 1s and then restart t he headset
C h arg in g w h it e l ig h t lo n g l ig h t , c h arg in g b o x l ig h t
ic e b lue l ight , fu lly c h arg e d h e ad s e t
t urn b lue l ight 30s a fter o ff
Charging Compartment Charging
Charging compartment connection type-c port
The white light flashes when charging, the white light stays on when fully charged,
the ice blue light stays on when charging the headset, and the ice blue light flashes when
the battery is low.
3. Product Parameters
Play time
About 8~10 hours
Standby time
90 Days
Microphone sensitivity --38(±2) dB
Connection distance 10M
Call duration
About 6~8 hours
Speaker
10mm
Headphone battery
40mAh
Charging case battery 400mAh
2 hours Frequency range 20-20000Hz
FCC ID:2BNT7-REAL1PRO
5. Packinglist
/
/ /
/ /
/
ANC
Small,medium
/ /
Earphones*1 and large ear caps1 Charging cable*1
L/RL/R (Includes headphones own pair)
Instruction manual/ warranty card*1
FCC Caution:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply withthelimits for a Class B digital devi3ce, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
6. Warranty police
Goddess Day 1. From the date of receipt, there is no reason to return the goods within 7 days, and there is a free exchange within 15 days (such as Tmall, JD, etc.). For returns and exchanges that are not related to quality issues, the shipping cost will be borne by the consumer, and for re shipments, the shipping cost will be borne by the merchant. If there are invoices and gifts, please send them back together. 2. If you purchased from a local store, you can enjoy the 15 day replacement service provided by our company from the date of purchase at the local after-sales service center. If there is no after-sales service center locally, you can entrust a dealer to provide the replacement service; Random accessories are consumables and are not covered by warranty.
Non-warranty regulations
1. Unauthorized repair, misuse, collision, negligence, abuse, accident, modification, or tearing and altering of labels or anti-counterfeiting marks; 2. The original serial number label of the product shows signs of tampering, replacement, tearing, etc; 3. The model and number on the quality assurance certificate do not match the actual product; 4. The product exceeds the warranty period specified by our company 5. External damage caused by abnormal use; 6. Outer packaging and accompanying gifts, services beyond the products promised by sales personnel And additional configurations and gifts; 7. Improper storage: such as performance damage caused by prolonged exposure of the product to abnormal temperatures or temperature environments; 8. Damage to the product caused by failure to follow the operating instructions, human abuse and misuse, unauthorized modification, and force majeure.
Warranty record form
Dear user, thank you very much for using Yinbeiqi products. Please fill it out carefully and keep it properly. The company reserves the right to interpret the after-sales service regulations for this product.
Dealer Information
Username contact number mail mail adress
TEL:400-808-2787
Warranty Card:
Username
Warranty content
Warranty Date
Inspectors:
[Manufacturer] YINBEIQI(SHENZHEN)TECHNOLOGY CO.,LTD. [Address] Building A, Bantian International Center, No. 5 Huancheng South Road, Maantang Community, Bantian Street, Longgang District, Shenzhen [Contact number] 400-808-2787
Warning: Counterfeiting will be prosecuted. Implementation standard: GB 4943. 1-2022 Audio/video,information and communication technology equipment--Part 1: Safety requirements
Corel PDF Engine Version 22.0.0.412