Fastrack FPods FS100 Quick Start Guide

Welcome

Hey there, Congratulations on getting your very own FPods FS100 Truly Wireless Earpods with latest BT Version V5.3, Quad Mic ENC, 10mm deep bass drivers, 60ms low latency gaming mode, and IPX4 rating. You can now truly sink into your world of sound. Your musical vibe begins here.

Included Components

• 2x Truly Wireless Earpods
• 1x Portable Charging Case
• 1x Type C Charging Cable
• Eargels (S, M, L)
• Quick Start Guide

Overview

The FPods FS100 feature a sleek design with:

• LED Indicator: Provides status updates for earpods and case.
• Touch Area: Located on the earpods for control.
• Charging Pins: Connect earpods to the case for charging.
• USB-C Charging Port: Located on the charging case for power input.

Getting Started: Pairing Your FPods

1. Place the earpods in the charging case and close the lid. Ensure they are charged fully before starting.
2. Open the charging case lid and take out the buds.
3. Turn ON your phone's Bluetooth settings ? and search for "FPods FS100". Tap to pair and connect.
4. Your earpods are now paired and ready for use.
5. The earpods will automatically re-connect to a previously paired device when you use them next (ensure the device's Bluetooth is ON).
6. To charge the earpods, place them back into the case and close the lid. This also powers off the earpods.
7. Use the right sized Eartips (S, M, L) for a better fit and immersive audio experience.

Setup and Power Management

Power On: Remove earpods from the case. To manually power on, press and hold the buds for 2 seconds.

Power Off: Place the earpods in the charging case and close the lid. To manually power off, press and hold the buds for 4 seconds.

Charging Earpods: Place them in the charging case and close the lid. Please ensure to charge your earpods fully before using them.

Charging the Case: Use the provided Type C charging cable. Use a standard 5V/1A adaptor for charging ?.

Resetting Your FPods

If you encounter pairing issues or need to reset your earbuds:

1. Take out the earpods from the Charging Case.
2. Unpair the "FPods FS100" from your connected device's Bluetooth settings.
3. Tap 5 times on either the Left (L) or Right (R) bud.
4. The red LED on both buds will blink 3 times and then turn off.
5. Your earpods are now reset and ready to pair with a new device.

FCC Compliance Statement

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

FCC ID: 2AK9F-FT8

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Controls

Call Controls ?

• Call Answer: Double tap on L/R bud.
• Call Hangup: Double tap on L/R bud during the call.
• Call Reject/Decline: Press & hold on L/R bud for 2 seconds.

Music Controls ▶️

• Play/Pause: Double tap on L/R bud.
• Increase Volume: Single tap on R bud ?.
• Decrease Volume: Single tap on L bud ?.
• Previous Track: Press & hold L bud for 2 seconds ⏮️.
• Next Track: Press & hold R bud for 2 seconds ⏭️.

Monopod Mode (Single Earbud Use)

You can use either the Left (L) or Right (R) earbud independently.

Controls for Single Bud:

• Call Answer: Double tap bud.
• Call Reject: Press & hold bud for 2 seconds ??.
• Call Hangup: Double tap bud.
• Music Play/Pause: Double tap bud ▶️/⏸️.
• Music Volume Increase: Single tap bud ?.
• Music Volume Decrease: Single tap bud ?.
• Music Previous Track: Press & hold bud for 2 seconds ⏮️.
• Music Next Track: Press & hold bud for 2 seconds ⏭️.

Voice Assistant & Gaming Mode ??️

• Activate Voice Assistant: Tap 3 times on L/R bud.
• Activate Gaming Mode: Tap 4 times on L/R bud. This mode offers low latency of 60ms for a better gaming experience.

? Note: Remember to switch off gaming mode while listening to music for the best audio experience.

Key Features

• Gaming Mode: Low Latency of 60ms for immersive gaming.
• Voice Assistant: Access your preferred assistant with a tap.
• Environmental Noise Cancellation (Quad Mic): Clearer calls by reducing background noise ?.
• Total Playtime: Up to 40 Hours with the charging case*.
• NitroFast Charge: 10 minutes of charging provides 150 minutes of playtime*.
• IPX4 Water Resistance: Protects against splashes and sweat ?.
• Design: Lightweight earpods with a premium leather finish.
• Audio: 10mm drivers for deep bass.
• Connectivity: Latest Bluetooth V5.3 ?.

*As tested under optimal conditions at Titan Smart Labs.

LED Indications

Earpods ?

• Power ON: Blue LED blinks 3 times.
• Power OFF: Red LED blinks 3 times.
• Pairing Mode: Blue/Red LED blinks alternatively on 1 bud.
• Connected: LED off on both buds.
• While Charging: Solid Red LED on buds during charging.
• Full Charge: Buds LED goes off when fully charged.

Charging Case ?

• While Charging: Red LED blinks continuously.
• Full Charge: Solid red when fully charged.

Product Specifications

*As tested under optimal conditions at Titan Smart Labs.

Care & Warranty

The Don'ts ❌

• Do not expose the earpods to extreme temperature/weather conditions.
• Don't use chemicals or detergent to clean your buds.
• Do not keep the case on charging for a longer time once it is fully charged.

Terms of Warranty ✔️

The product comes with a One year limited warranty against manufacturing defects. T&C apply. Any damage to the earpods that is not a malfunctioning issue will void the product's warranty. Please take care of your buds to ensure prolonged service life.

For queries or complaints, please call Fastrack support at 1800-266-0123 or visit the nearest Fastrack store.

For more details, please visit www.fastrack.in.