Fastrack FPods FZ100: Truly Wireless Earbuds
Congratulations on your new Fastrack FPods FZ100 Truly Wireless Earbuds! Experience superior sound with 3C NitroFast Charge, Bluetooth V5.0, Quad Mic ENC for clear calls, 10mm deep bass drivers, 40ms ultra-low latency gaming mode, and IPX5 water resistance.
Included Components
- 2x Truly Wireless Earpods
- 1x Portable Charging Case
- 1x Type C Charging Cable
- Eargels (S, M, L)
- 1x Quick Start Guide
Overview
Touch Area: For controlling music and calls.
Charging Pins: Connects earpods to the case for charging.
LED Indicator: Shows charging status.
USB-C Charging Port: For charging the case.
Getting Started
- Place the earpods in the charging case and close the lid. Charge them fully before pairing.
- Open the charging case lid and remove the earpods.
- Turn on your phone's Bluetooth, search for "FPods FZ100", and tap to pair.
- Your earpods are now paired. They will automatically reconnect to the last paired device when you open the case (ensure Bluetooth is enabled on your device).
- To charge the earpods, place them back in the case and close the lid. This also powers off the earpods.
- Use the appropriate sized eartips (S, M, L) for a secure and comfortable fit.
Setup
- Power On: Remove earpods from the case. Manual power on: Press and hold buds for 3 seconds.
- Power Off: Place earpods in the case and close the lid. Manual power off: Press and hold buds for 5 seconds.
- Charging Earpods: Place them in the charging case and close the lid.
- Charging the Case: Use the provided Type C charging cable. A standard 5V/1A adapter is recommended.
Resetting Your FPods FZ100
- Remove earpods from the charging case.
- Unpair the earpods from your connected device.
- Tap 5 times on either the left or right bud.
- You will hear a "Power Off" voice prompt. Your earpods are now reset and ready to pair again.
Controls
Call Controls
- Answer/Hangup Call: Double tap on L/R bud.
- Reject/Decline Call: Press and hold L/R bud for 2 seconds.
Music Controls
- Play/Pause: Double tap on L/R bud.
- Increase Volume: Single tap on R bud.
- Decrease Volume: Single tap on L bud.
- Previous Track: Press and hold L bud for 2 seconds.
- Next Track: Press and hold R bud for 2 seconds.
Monopod Mode
You can use either earpod individually. Controls are the same as stereo mode for their respective functions (e.g., single tap for volume, double tap for play/pause).
Features
- Voice Assistant: Triple tap on L/R bud to activate.
- Gaming Mode: Quadruple tap on L/R bud to activate for ultra-low latency (40ms). Remember to switch off gaming mode for optimal music listening.
- Environmental Noise Cancellation (Quad Mic): Enjoy clearer calls.
- 3C NitroFast Charge: Get 200 minutes of playtime with a 10-minute charge.
- Total Playtime: Up to 50 hours with the charging case.
- 10mm Driver: Delivers extra deep bass.
- Latest BT Version 5.0: Ensures stable connectivity.
- Premium Finish: Stylish and durable design.
LED Indications
- Earpod Charging: Red LED on the respective bud.
- Earpod Fully Charged: LED turns off.
- Case Charging: Middle blue LED blinks.
- Case Fully Charged: Middle blue LED stays on.
Product Specifications
- BT Version: V5.0
- Driver Size: 10mm
- Frequency Response: 20Hz – 20KHz
- Water Resistance: IPX5
- Total Playtime with Case: 50 Hours
- Earpods Charging Time: 30 min
- Case Charging Time: 120 min
- Charging Voltage: DC 5V
- Transmission Distance: 10m
- Earpods Battery Capacity: 40mAh
- Charging Case Battery Capacity: 480mAh
Care & Warranty
The Don'ts
- Do not expose earpods to extreme temperatures or weather conditions.
- Do not use chemicals or detergents to clean the buds.
- Do not leave the charging case plugged in after it is fully charged.
Warranty
The product includes a one-year limited warranty against manufacturing defects. Please refer to the terms and conditions. Any damage not related to manufacturing defects will void the warranty. For support, call 1800-266-0123 or visit the nearest Fastrack store.
For more product details, visit www.fastrack.in.
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) it must accept any interference received, including interference that may cause undesired operation. Modifications not expressly approved by the responsible party could void the user's authority to operate the equipment. This equipment complies with the limits for a Class B digital device, providing reasonable protection against harmful interference in residential installations. If interference occurs, try relocating the receiving antenna, increasing separation between equipment and receiver, connecting to a different circuit, or consulting a dealer/technician. The device meets general RF exposure requirements and can be used in portable conditions without restriction.
FCC ID: 2AK9F-FT9