Owner's Manual

Wireless Car Charger with USB-C, Auto-Clamp, 15W Qi Charging, Windshield/Dash/Vent Phone Holder

Model: U280-CQ01

This manual is available in Spanish on the Tripp Lite website: tripplite.com

This manual is available in French on the Tripp Lite website: tripplite.com

A Russian version of this manual is available on the Tripp Lite website: tripplite.com

PROTECT YOUR INVESTMENT!

Register your product for quicker service and ultimate peace of mind. You could also win an ISOBAR6ULTRA surge protector—a $100 value!

tripplite.com/warranty

Tripp Lite Logo

95 Years Manufacturing Excellence

1111 W. 35th Street, Chicago, IL 60609 USA

tripplite.com/support

Copyright © 2020 Tripp Lite. All rights reserved.

Product Features

Package Includes

Assembly

Windshield/Dashboard

Step 1: Shows the adjustable arm mechanism being detached from the main mounting base.

Step 2: Shows the adjustable arm mechanism being securely attached to the main mounting base.

Air Vent

Step 1: Shows the vent clip being detached from the main holder unit.

Step 2: Shows the vent clip being securely attached to the main holder unit.

Installation

Windshield/Dashboard

Illustrates the assembled charger unit being affixed to a dashboard surface.

Indicates the USB-C port on the charger connecting to a USB-A power source.

Air Vent

Illustrates the assembled charger unit being attached to a car's air vent.

Indicates the USB-C port on the charger connecting to a USB-A power source.

Operation

Notes:

  1. Using the included USB-A to USB-C cable, connect the wireless charger to a USB-A power adapter. ? Note: QC 2.0/3.0 power adapters are recommended.
  2. Once connected to power, the LEDs surrounding the smart-touch buttons will turn green to indicate the charger is in standby mode.
  3. Tap either smart-touch button located on each side of the charger to open the two adjustable arms. Place your phone on the charger. In doing so, the two arms will automatically secure the phone. The two blue LEDs located on each side of the charger will illuminate solid to indicate the phone is charging wirelessly. ? Note: Foreign Body Detection (FBD) occurs when metal or magnetic objects are placed on the charger. The smart-touch button LEDs will flash blue 6x before cutting off power to the charger.
  4. To remove the phone from the charger, touch either smart-touch button located on each side of the charger to open the two adjustable arms.

Specifications

InputUSB-C USB: 5V/2A, 9V/1.67A, 12V/1.5A
Output5W, 7.5W, 10W, 15W
Qi CompatibleYes
Switch Frequency110 kHz to 205 kHz
Operating Temperature Range32°F to 104°F / 0°C to 40°C
Storage Temperature Range14°F to 122°F / -10°C to 50°C
Operating Humidity Range10% to 80% RH, Non-Condensing
Storage Humidity Range5% to 95% RH, Non-Condensing
Max Output for Apple iPhoneUp to 7.5W
Max Output for Samsung GalaxyUp to 10W
Dimensions (H x W x D)4.8 x 2.8 x 2 in. / 121 x 74 x 52 mm
Weight0.45 lb. / 0.2 kg

Warranty and Product Registration

2-Year Limited Warranty

Tripp Lite warrants its products to be free from defects in materials and workmanship for a period of one (2) years from the date of initial purchase. Tripp Lite's obligation under this warranty is limited to repairing or replacing (at its sole option) any such defective products. To obtain service under this warranty, you must obtain a Returned Material Authorization (RMA) number from Tripp Lite or an authorized Tripp Lite service center. Products must be returned to Tripp Lite or an authorized Tripp Lite service center with transportation charges prepaid and must be accompanied by a brief description of the problem encountered and proof of date and place of purchase. This warranty does not apply to equipment, which has been damaged by accident, negligence or misapplication or has been altered or modified in any way.

EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Some states do not permit limitation or exclusion of implied warranties; therefore, the aforesaid limitation(s) or exclusion(s) may not apply to the purchaser.

EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Specifically, Tripp Lite is not liable for any costs, such as lost profits or revenue, loss of equipment, loss of use of equipment, loss of software, loss of data, costs of substitutes, claims by third parties, or otherwise.

Product Registration

Visit tripplite.com/warranty today to register your new Tripp Lite product. You'll be automatically entered into a drawing for a chance to win a FREE Tripp Lite product!*

* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.

WEEE Compliance Information for Tripp Lite Customers and Recyclers (European Union)

Under the Waste Electrical and Electronic Equipment (WEEE) Directive and implementing regulations, when customers buy new electrical and electronic equipment from Tripp Lite they are entitled to:

⚠️ WARNING

Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the life support equipment or to significantly affect its safety or effectiveness is not recommended.

Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice. Photos and illustrations may differ slightly from actual products.

Models: U280-CQ01, Wireless Car Charger with USB-C, Car Charger with USB-C, Wireless Car Charger, USB-C Car Charger

File Info : application/pdf, 8 Pages, 611.73KB

PDF preview unavailable. Download the PDF instead.

1062335876

References

Adobe InDesign 15.0 (Windows) Adobe PDF Library 15.0

Related Documents

Preview Tripp Lite U280-Q01ST-P-BK 10W Wireless Fast-Charging Stand Quick Start Guide
Get started quickly with the Tripp Lite U280-Q01ST-P-BK 10W Wireless Fast-Charging Stand. This guide covers product features, package contents, operation, specifications, and warranty information for this Qi-compatible charging solution.
Preview Tripp Lite CS16USB 16-Port USB Charging Station for Tablets and Mobile Devices
The Tripp Lite CS16USB is a secure 16-port USB charging and syncing station designed for tablets and mobile devices. It offers fast 2.4A charging per port, robust steel construction, integrated cord management, and wall-mount capability, making it ideal for educational, office, commercial, retail, industrial, and healthcare environments.
Preview Tripp Lite DMTB11 Tablet Mount Installation Instructions for 9.7-11 Inch Tablets
Step-by-step installation guide for the Tripp Lite DMTB11 tablet mount, designed for 9.7 to 11-inch tablets. Includes component checklist and compatibility information.
Preview Tripp Lite U444-06N-H4GUC2 USB-C Multiport Hub Adapter: 4K HDMI, Gigabit Ethernet, 100W PD 3.0 Charging - Owner's Manual
Owner's manual for the Tripp Lite U444-06N-H4GUC2 USB-C Multiport Hub Adapter. This guide details product features, package contents, installation steps, technical specifications, and warranty information for the adapter, which supports 4K HDMI, Gigabit Ethernet, USB-A ports, and 100W Power Delivery 3.0 charging.
Preview Tripp Lite TLP66UCLAMP 6-Outlet Surge Protector with USB-A and USB-C
The Tripp Lite TLP66UCLAMP is a 6-outlet surge protector with USB-A and USB-C ports, offering 900 joules of protection. It features a desk clamp, 6 ft. cord, and EMI/RFI filtering for enhanced performance of connected electronics.
Preview Tripp Lite U437-001-C-V2 USB-C to 3.5mm Audio Adapter with PD Charging - Quick Start Guide
Quick start guide for the Tripp Lite U437-001-C-V2 USB-C to Hi-Res 3.5 mm Audio Adapter with PD Charging, detailing product features, package contents, operation, specifications, and warranty information.
Preview Tripp Lite PDUMH30HVATNET: Single-Phase Switched Rack-Mount ATS PDU
Explore the features and specifications of the Tripp Lite PDUMH30HVATNET, a 5-5.8kW single-phase switched rack-mount Automatic Transfer Switch (ATS) PDU designed for reliable power distribution in IT environments.
Preview Tripp Lite SRWALLBRKT2U SmartRack 2U Vertical Wall-Mount Rack Bracket Specifications
Detailed specifications and features for the Tripp Lite SRWALLBRKT2U SmartRack 2U Vertical Wall-Mount Rack Bracket, designed for 19-inch rack equipment with a 175 lb load rating and sturdy steel construction.