FALCON

Quick Start Guide

FN-TV19-S

Please read this manual carefully before TV operation. Retain it for future reference.

*For help on all features of the TV, there is an on-screen User Guide. To access the User guide, Press the Settings button, select All Options. Then navigate to Support and select User Guide.

Preface

1. Read this Quick Start Guide before starting Set-up.
2. Then, carefully follow the Instructions, heeding all Warnings.
3. Do Not remove the TV back cover or block the TV ventilation openings.
4. Do Not use the TV near water or a heat Source.
5. Do not pinch or cut the Power Cord.

Note: The product and illustrations in this user's manual are for explanation purposes only and may vary depending on model.

WARNING

Never place a television set in an unstable location. A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as:

• Using cabinets or stands recommended by the manufacturer of the television set.
• Only using furniture that can safely support the television set.
• Ensuring the television set is not overhanging the edge of the supporting furniture.
• Not placing the television set on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television set to a suitable support.
• Not placing the television set on cloth or other materials that may be located between the television set and supporting furniture.
• Educating children about the dangers of climbing on furniture to reach the television set or its controls.

If your existing television set is being retained and relocated, the same considerations as above should be applied.

The plug or appliance coupler is used as the disconnect device; the disconnect device shall remain readily operable.

HDMI
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

1. Unpack the TV and Accessories from the Carton Box

1. Please see the unpacking instructions on the top of the carton box (and below).

2. As noted, be careful not to grab or put pressure on the TV screen.

3. Check the carton box carefully for all included Accessories.

• [prohibited-symbol] DO NOT
• [prohibited-symbol] DO NOT USE BLADES TO OPEN

For 27" - 58"

[warning-symbol] UNPACK WITH CARE

For 27" - 58"

[warning-symbol] UNPACK WITH CARE

2. Package Contents

• LED television
• Remote control with 2 AAA batteries
• Red cigarette lighter
• Quick Start Guide
• VESA mounting screws
• Power adaptor (12V, 3A)
• Mini AV Cable
• Base stand and screws
• DVD Remote with CR2025 battery

3. What You Will Need for Set-up (Not Included)

• Philips Head Screwdriver
• Internet Connection (Needed for Smart TV Streaming)
• Wireless Router (Needed for Smart TV Streaming)
• Computer, Tablet or Smart Phone (Needed for Smart TV Set-Up)

4. Attach the Table Stands

How to assemble the stand:

If you need to remove or assemble the stand, please read the following instructions.

• Before attaching/detaching the stand, make sure to turn off the TV.
• Before performing work, spread cushioning over the base area to lay the LED TV on. This will prevent it from being damaged.

Assembling instruction:

Put the television on the table, fix the stands with four screws given in the carton.

Step 1: Fasten the base assembly with screws given in the carton.

Step 2: Insert the assembled base into the hole, take out screws provided with TV set and tighten them into screw holes.

To disconnect the stand from the TV, perform the above steps in reverse order.

5. Front panel

The buttons on the lower-right panel control your TV's basic features, including the on-screen menu. To use the more advanced features, you must use the remote control.

Remote Control Sensor
Power Indicator

6. Specifications

NOTES:

• Design and specifications are subject to change without notice.
• Weight and Dimension shown are approximate.

7. Connect The TV

1. Insert the female end of the Power Adaptor into the back of the TV. Then carefully plug the standard AC plug end into a 230V AC outlet.

2. If you are connecting other devices to the TV, utilize the appropriate optional cables and connect to the appropriate ports on the back or side of the TV.

Location of Connections

Back View of the TV

TV Side View

TV Bottom View

Ports include: DC IN, RJ45, USB1, USB2, HDMI3, HDMI2, HDMI1, OPTICAL OUT, ANT IN, DVB-C/T2, CI, Mini AV IN, Earphone.

8. Prepare The Remote Control

Remove the battery cover and insert the provided batteries. Then replace the battery cover.

Installing Batteries

1. Open the battery compartment cover on the back side.
2. Insert two 1.5V AAA size batteries in correct polarity. Don't mix old or used batteries with new ones.
3. Close the cover.

[remote-pointing-symbol] Point the remote towards the remote control sensor of the TV and use it within 8 meters.

[recycling-symbol] Put the used batteries into the recycling bin since they can negatively affect the environment.

Note:

1. Batteries should last approximately one year under normal use (actual use will vary).
2. If the TV will remain inactive for an extended period of time, remove the batteries from the remote control to avoid possible damage due to leakage.
3. Do not mix old and new batteries or different types of batteries.
4. Do not throw batteries into fire or water.
5. The batteries (battery pack or batteries installed) should not be exposed to excessive heat such as sunshine, fire or the like.

9. Remote Control

POWER: ON/OFF.

[input-source-symbol]: Selects an input source.

+/- : Adjusts the volume level.

[/]: You can change the program.

[mute-symbol]: Mutes the sound.

[home-symbol]: Displays the Home menu.

[voice-input-symbol]: Voice input.

[123-symbol]: Displays the additional buttons on the remote control.

[return-symbol]: Return to the previous menu / Exit the menu.

[settings-symbol]: Enters the Quick Settings menu.

[channel-list-symbol]: Channel list.

Netflix: go to Netflix app.

Prime Video: go to Prime Video app.

Disney+: go to Disney+ app.

LG Channels: go to LG channels.

Fplay: go to Freeview Play app.

Rakuten TV: go to Rakuten TV app.

10. DVD Remote

POWER (red): Switch DVD mode on/off

EJECT (green): Ejects the DVD

SETUP: DVD mode settings

MENU: Opens the main menu

GOTO: Function key

NUMBER KEYS: For entering e.g. program numbers

[play-pause-symbol]: Start / Pause

[stop-symbol]: Stop

[fast-forward-symbol] / [rewind-symbol]: Wind forward / Wind backward

[previous-chapter-symbol] / [next-chapter-symbol]: Previous chapter / Next chapter

OK: Confirm selection

To play a DVD, please use the DVD remote control included in the delivery contents. You can use it to switch to DVD mode or back to TV mode via the power button on the DVD remote control.

In addition, the device automatically switches to DVD mode when you insert a DVD into the DVD slot provided for this purpose.

Operation in DVD mode depends on the data structure on the DVD. For example, an original purchased movie will immediately switch to the main overview for playback.

Note: To put the DVD remote control into operation, please remove the battery contact foil by pulling it out.

10. DVD Operation

Note: DVD mode is only possible if a suitable disc has been inserted. You can also switch to DVD mode under AV channel via the power key of the DVD remote control.

The DVD drive has an automatic feed. Insert the DVD into the opening of the drive with little effort. It will then be pulled in automatically. Make sure that the reflective side of the DVD is facing the screen. The labeled side (label) points towards the back.

After the DVD or CD has been inserted, the TV automatically starts playback or, in the case of a DVD, displays the respective on-screen menu.

To control the DVD and CD playback, please use the enclosed remote control!

11. Troubleshooting

Having trouble? Don't worry, it's usually an easy fix.

WEE2.0

It provides guides related to TV manipulation, broadcasting, content utilization, device connection, smart functions, settings and problem solving so that user can refer to it when using TV. You can watch the manual at the same time while watching TV or running the app. You can easily view the user's manual using the Description menu or Magic Explorer function.

12. Default safety password

You can enter the default password "0000" to turn on/off safety function.

13. Need more help?

This guide is just a quick setup guide for your TV. For more information and assistance regarding features and settings for your TV, an on-screen User Guide is available in the Settings menu of your TV.

To access the on-screen User Guide:

Press the Settings button [settings-icon] on the remote and Navigate to All Settings and then Support. Press User Guide.

You will have access to on-screen User Guides of all the features, settings and help to get the most out of your New WebOS Smart Camping TV.

You can also access the User Guide by Pressing the additional options button [...] on the remote.

Safety Information

General Safety Precautions:

• This product is intended for private, non-commercial use only.
• Like all electronic products, this product is not a toy and should be kept out of reach of children.
• This product is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless supervised by a person responsible for their safety or given instructions on how to use the device.
• In case of the following situations, immediately unplug the power cord and contact customer service:
  • If the device has been exposed to extreme shock.
  • If the device is damaged or foreign objects have entered the device.
  • If smoke or unusual odors emanate from the device.
• Do not disassemble the product into its individual parts. The device contains no user-serviceable components. Improper reassembly can lead to electric shock or malfunction.
• Never open the device! Any repair attempt by unqualified persons can be dangerous.
• Do not make any modifications to the product, as this will void all warranty claims.
• Do not place liquid-filled objects or open flames (fire) on the device.

Transport Instructions:

• Handle the device only by the housing edges. The display is made of glass or plastic and can break or be damaged if handled improperly. No warranty will be provided for damage caused by external influences.
• Avoid touching the screen or pressing on the screen or frame with your fingers for extended periods. This can cause temporary distortion effects or damage to the screen.
• Do not apply strong pressure to the device display with your hand or a pointed object such as a nail, pencil, or ballpoint pen.
• It is recommended to move or transport the TV set in its original carton or packaging (if not permanently mounted).

Mounting Instructions:

• Ensure ventilation slots on the back of the device remain clear. Do not place foreign objects such as newspapers, doilies, or other textiles on or over the TV set. Ensure at least 2 cm of free space on the sides and top for air circulation.
• If the device is installed or mounted in a cabinet or shelf, ensure that air circulation is adequate. Like any electronic device, the product requires air for cooling during operation. If air circulation is hindered, it can lead to fire or automatic shutdown (protective shutdown).
• Protect the device from dusty environments.
• If the TV set is mounted on the wall, it must not be hung on the power and signal cables on the back of the TV set. Otherwise, there is a risk of fire or electric shock.
• Ensure that children do not hang on or climb on the TV set. Otherwise, the device may tip over, causing serious injury.
• If you mount the TV set on the wall, attach a VESA wall mount (optionally available) to the back of the device. If you wish to mount the TV set with a wall mount, attach it carefully to prevent it from falling.
• Do not place the product on unstable shelves or inclined surfaces. Also, avoid locations that vibrate or where the product does not have a secure hold. Otherwise, the device may fall down or tip over, causing injury or damage to the device.
• The device should not protrude forward, especially when placed in or on furniture.
• Do not touch the ventilation openings while the TV set is running for a long time, as the ventilation openings may become hot.

Electrical Safety:

• Incorrect voltages can damage the device. This device must only be connected to a power supply network with the voltage specified on the type plate using the correct 12V/24V device connection cable.
• Always route the power cable so that it cannot be damaged. The power cable must not be kinked, routed over sharp edges, stepped on, or exposed to chemicals. A power cable with damaged insulation can lead to electric shock and poses a fire hazard.
• Additional Notes – External 230V Power Supply (optional):
• When using the product with a 230V power supply, ensure it is always easily accessible to quickly remove it from the socket in an emergency.
• Do not touch the power plug with wet hands. If the contact pins are wet or dusty, dry the power plug completely or remove dust from it. Moisture increases the risk of a fatal electric shock.
• The power cable must be fully inserted into the socket. If the power cable is not firmly inserted into the socket, there is a risk of fire.
• Do not touch the end of the power cable with a conductive object (e.g., a fork) while the power cable is connected to the socket.
• No metal objects such as coins, hairpins, cutlery, or wire, nor flammable objects such as paper or matches, should enter the device. Pay particular attention to children. There is a risk of electric shock, fire, or injury. If an object enters the device, unplug the power cable and contact customer service.
• The power cable must not come into contact with hot objects such as a heater. Also, do not place heavy objects or the device itself on the power cable. Otherwise, there is a risk of fire and electric shock.
• Do not connect too many electrical devices to a single socket. Otherwise, fires may occur due to overheating.

Remote Control and Batteries:

• Attention! Laser Class 1: The remote control has a Class 1 laser diode. Do not look at it with optical devices to avoid eye injuries.
• Ensure that no objects are between the remote control and the IR sensor. The signal from the remote control can be disturbed by sunlight or other strong light radiation.
• Important Safety Instructions:
• Always keep batteries out of the reach of children! There is a risk of swallowing.
• Never attempt to recharge alkaline batteries.
• Do not short-circuit batteries or throw them into fire.
• Always replace both batteries simultaneously. Do not mix old and new batteries or batteries of different types.
• Battery acid that leaks from a battery can cause skin irritation. If it comes into contact with skin, rinse with plenty of water. If the liquid gets into your eyes, rinse thoroughly with water, do not rub, and seek medical attention immediately.

Delivery Contents

• TV Set
• Remote Control (WebOS and DVD Player Remote Control)
• Stand
• 12V/24V connection cable with cigarette lighter
• 230V Power Supply Unit
• Mounting screws & other accessories
• User Manual

Important Notes!

To exit DVD mode, press the [POWER] button on the DVD remote control. If you exit DVD mode directly via the normal remote control, the drive will continue to run in the background and will only automatically switch to standby mode after approx. 2 hours.

Multimedia Functions

HDMI CEC Function

As the operating system is webOS Hub from LG, the TV set supports SIMPLINK (LG's own CEC control). This allows, for example, a soundbar with an HDMI™™ input, a console, or an Android stick to be connected and controlled via the TV's remote control.

Procedure:

1. Connect the corresponding device to the HDMI™™ port on the back of the TV.
2. Press the [menu-symbol] button on the remote control and select the following path: All Settings > General > Devices > HDMI Settings > SIMPLINK (HDMI-CEC) and activate it.

Note: For connecting corresponding devices, please use a high-quality connection cable (High Speed HDMI™™ Cable with Ethernet), which also has the appropriate pin assignment for information exchange between both devices.

Using HDMI ARC

If a corresponding device (e.g., a soundbar) has been connected via HDMI™™, and you wish to output the sound through it, the audio output source must also be changed.

Press the [menu-symbol] button on the remote control and select [Audio Output] in the quick selection. Confirm the selection with the [ENTER] button. The audio output can now be changed accordingly to the HDMI(ARC) device.

Connecting Bluetooth® Output Devices

If a Bluetooth® headphone or a Bluetooth® speaker is to be connected to the TV set, you can set this up in two ways.

Go to the device settings using the [menu-symbol] button on the remote control.

Option 1 – Setup via [Audio Output] (third item from the top):

Use the navigation buttons (left/right) to select the [Bluetooth Device] option.

Cleaning

Do not spray water on the product, and do not bring it into contact with flammable substances (thinners or benzene). There is a risk of electric shock and fire.

When cleaning, ensure that no liquids penetrate the product. The use of solvent-based or aggressive cleaning agents, as well as spirits or thinners, is prohibited, as they could damage the coating or the surface of the product. Therefore, clean the product exclusively with a soft, lint-free, and slightly damp cloth.

Legal Notices

License Texts

HDMI
The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

Bluetooth
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Falcon World Class Technology is under license.

Apple®, iPhone® and iPad® are trademarks, App Store is a service mark of Apple Inc., registered in the U.S.A. and other countries.

Google, YouTube, other marks are trademarks of Google LLC.

Other names or designations mentioned may be trademarks or registered trademarks of their respective owners.

Manufacturer Information

Dear Customer, if you require technical advice and your dealer could not help you, please contact our technical support. Our technical support is available in German and English. Please also visit our service page at: https://www.falcontechnology.eu/product-support/

Disclaimer

Falcon Technical Ltd assumes no liability or warranty for damages resulting from improper installation or assembly, improper use of the product, or failure to observe the safety instructions.

Improvements and changes to this user manual – due to printing errors, inaccuracies in the information provided, or product improvements – may be made by Falcon at any time and without prior notice. Such changes will be incorporated in newer editions of this user manual or in the online version. All images are for illustrative purposes only and do not necessarily represent the actual device 100% accurately.

Warranty Information

The warranty period begins with the purchase of the device. Please provide proof of purchase for this date. Please keep these documents carefully. Our warranty service is based on our warranty conditions valid at the time of purchase.

Copyright

This user manual is protected by copyright. Any reproduction or reprinting, even in part, as well as the reproduction of illustrations, even in modified form, is only permitted with the written consent of the manufacturer.

Disposal

Environmental Protection Notes

From the time of the implementation of the European directives 2012/19/EU and 2006/66/EC into national law, the following applies: Electrical and electronic devices as well as batteries must not be disposed of with household waste. The consumer is legally obliged to return electrical and electronic devices as well as batteries at the end of their lifespan to designated public collection points or to the point of sale.

Details are regulated by the respective national law. The symbol on the product, the user manual, or the packaging indicates these provisions. By recycling, material recovery, or other forms of recovery of old devices/batteries, you make an important contribution to protecting our environment.

Information - Packaging Material

Packaging and packaging materials are recyclable and should generally be returned for recycling. Packaging materials such as foil bags do not belong in children's hands!

Simplified Declaration of Conformity according to RED Directive

Falcon Technical Ltd hereby declares that the described radio equipment type complies with Directive 2014/53/EU and the other directives applicable to the product. The full text of the EU Declaration of Conformity is available at the following internet address: www.falcontechnology.eu (Please refer to your corresponding model designation).

Transmission Power Information

(As frequency channels may differ by country, the user cannot change or adjust the operating frequency. This device is set according to the regional frequency table.)