Owner's Manual for LG models including: 27BA550 LED Monitor, 27BA550, LED Monitor, Monitor

CONFIDENTIAL

[SEC=AUO-General]

Dong Sun Hwang/Monitor B2C Development Project(dongsun.hwang@lge.com)

SERVICE MANUAL LED MONITOR

View PDF

LG 27BA550-B computer monitor 68.6 cm (27") 1920 x 1080 pixels Full HD Black


File Info : application/pdf, 22 Pages, 2.61MB

PDF preview unavailable. Download the PDF instead.

mmo 120543439 1723729009 6981 775880
LED MONITOR SERVICE MANUAL

CHASSIS : LM47A
MODEL : 24/ 27BA550 24/ 27BA560

24/ 27BA550-BA 24/ 27BA560-BA

CAUTION
BEFORE SERVICING THE CHASSIS, READ THE SAFETY PRECAUTIONS IN THIS MANUAL.

P/NO : MFL71804674 (2405-REV01) Any reproduction, duplication, distribution (including by way of email, facsimile or other electronic means), publication, modification, copying or transmission of this Service Manual is STRICTLY PROHIBITED unless you have obtained the prior written consent of the LG Electronics entity from which you received this Service Manual. The material covered by this prohibition includes, without limitation, any text, graphics or logos in this Service Manual.
Copyright © 2024 LG Electronics Inc. All rights reserved. Only training and service purposes.

CONTENTS

AUO-General

CONTENTS .............................................................................................. 2 SAFETY PRECAUTIONS ........................................................................ 3 SPECIFICATION ....................................................................................... 4 BLOCK DIAGRAM ................................................................................... 7 EXPLODED VIEW .................................................................................... 8 DISASSEMBLY AND ASSEMBLY PROCESS.......................................... 9 TROUBLE SHOOTING GUIDE ................................................................1 6 FIRMWARE UPDATE................................................................. APPENDIX

- 2 -

Copyright © 2024 LG Electronics Inc. All rights reserved. Only training and service purposes.

SAFETY PRECAUTIONS

AUO-General

IMPORTANT SAFETY NOTICE

Many electrical and mechanical parts in this chassis have special safety-related characteristics. These parts are identified by in the Exploded View. It is essential that these special safety parts should be replaced with the same components as recommended in this manual to prevent Shock, Fire, or other Hazards. Do not modify the original design without permission of manufacturer.

General Guidance
An isolation Transformer should always be used during the servicing of a receiver whose chassis is not isolated from the AC power line. Use a transformer of adequate power rating as this protects the technician from accidents resulting in personal injury from electrical shocks.
It will also protect the receiver and it's components from being damaged by accidental shorts of the circuitry that may be inadvertently introduced during the service operation.
If any fuse (or Fusible Resistor) in this TV receiver is blown, replace it with the specified.
When replacing a high wattage resistor (Oxide Metal Film Resistor, over 1 W), keep the resistor 10 mm away from PCB.
Keep wires away from high voltage or high temperature parts.
Before returning the receiver to the customer,

Leakage Current Hot Check (See below Figure)
Plug the AC cord directly into the AC outlet.
Do not use a line Isolation Transformer during this check. Connect 1.5 K / 10 watt resistor in parallel with a 0.15 uF capacitor between a known good earth ground (Water Pipe, Conduit, etc.) and the exposed metallic parts. Measure the AC voltage across the resistor using AC voltmeter with 1000 ohms/volt or more sensitivity. Reverse plug the AC cord into the AC outlet and repeat AC voltage measurements for each exposed metallic part. Any voltage measured must not exceed 0.75 volt RMS which is corresponds to 0.5 mA. In case any measurement is out of the limits specified, there is possibility of shock hazard and the set must be checked and repaired before it is returned to the customer.
Leakage Current Hot Check circuit
AC Volt-meter

always perform an AC leakage current check on the exposed metallic parts of the cabinet, such as antennas, terminals, etc., to be sure the set is safe to operate without damage of electrical shock.
Leakage Current Cold Check(Antenna Cold Check)
With the instrument AC plug removed from AC source, connect an electrical jumper across the two AC plug prongs. Place the AC switch in the on position, connect one lead of ohm-meter to the AC plug prongs tied together and touch other ohm-meter lead in turn to each exposed metallic parts such as antenna terminals, phone jacks, etc. If the exposed metallic part has a return path to the chassis, the measured resistance should be between 1 M and 5.2 M. When the exposed metal has no return path to the chassis the reading must be infinite. An other abnormality exists that must be corrected before the receiver is returned to the customer.

To Instrument's exposed METALLIC PARTS

Good Earth Ground such as WATER PIPE, CONDUIT etc.

- 3 -

Copyright © 2024 LG Electronics Inc. All rights reserved. Only training and service purposes.

AUO-General

SPECIFICATION
NOTE : Specifications and others are subject to change without notice for improvement.

1. General Specification

No

Item

1

Customer

BRAND

Content

2

User Model Name 24BA560/24BA550/24BA450/27BA560/24BA550/24BA450

3

Sale region

Word Wide

4

Feature

23.8" & 27" Monitor

5

Chassis Name

LM47A

External SW 5-WAY Joystick Switch

&Adj.

(Menu, Input, Game Mode, Power Off , Exit )

6

General Scope

Function

Game mode, FreeSync, HDR HDMI , DP

Input

USB Upstream 1ea, USB2.0 Down 2ea, USB3.2 Down

2ea

Length : 1.87±0.05 M

7

Power Cord

Shape : Desk top Color : Black

Length :1.8m±0.05 M USB 3.0 UP Shape : Detachable Type
Color : Black

8

Cable

Display Port

Length : 1.8 m±0.05 M ,Shape : Detachable Type . Color : Black

9 Power

HDMI

Length :1.8m±0.05 M Shape : Detachable Type Color : Black
Model: ADO-40W1 19 Input: AC100~240V 50~60Hz, 1.5 A Max Output: DC 19V 2.2A 41.8W, Model : 24/27BA560&550

Power board

Model: ADO-28W1 19 Input: AC100~240V 50~60Hz, 1.5 A Max Output: DC 19V 1.6A 30.4W, Model : 24/27BA450

Remark
Support P/No :Refer to
Accessory table(Defend on
suffix)
AUO P/No : 50.M2721.003
LGE P/No. : COV37849201
AUO P/No: 50.M2721.002
LGE P/No. : COV37849101
AUO P/No: 50.M2721.001
LGE P/No : COV37849001
41.8W & 30.4W power Board LGE P/No : EAY65899302 EAY65899202

Manufacturer : SHENZHEN HONOR ELECTRONICS CO.LTD

10 Applying module list

P/No

Specification

LGD OPEN Cell:

- 4 -

Copyright © 2024 LG Electronics Inc. All rights reserved. Only training and service purposes.

AUO-General

Type Name : MN238FG01 LGE P/No: COV37825701 AUO P/No: 9F.M2307.S01

Module Type name: MN238FG01.0 23.8" SERVICE LCM MODULE FLAT FHD

LM238WF2-SJX2 BM (AUO Dummy LCM module)

11 Screw

Type Name : MN270FG01 LGE P/No: COV37849401 AUO P/No: 9F.M2721.S01

Module Type name: MN270FG01.0 27" SERVICE LCM MODULE FLAT FHD

AUO OPEN Cell: LM270WF7-SJX2 BM (AUO Dummy LCM module)

AUO P/No : 86.8A524.5R0

M3 x L5, 16ea

AUO P/No : 86.00000.629

M4 x L5, 1ea

-

AUO P/No : 86.00000.591

M3 x L6, 3ea

AUO P/No : 86.00000.557

M3 x L8, 2ea

AUO P/No : 86.00000.175

M3 x L3, 2ea

All models common

- 5 -

Copyright © 2024 LG Electronics Inc. All rights reserved. Only training and service purposes.

AUO-General

2. Signal Timing (Resolution)

2-1.Signal (Video &Sync)
Video

C Sync

D

E

F

B A

2-2. H/V Timing : DP input & HDMI 1 / 2 input

mode

section

polari ty

DOT CLOCK [MHz]

Frequency [kHz]/[Hz]

Total Period(E)

Display (A)

Front Porch
(D)

Sync. (C)

Back Porch
(B)

Resolution

Support or not

HDMI1/2

DP

H(Pixels) -

1

V(Lines)

-

25.175

31.469 59.94

800

640

16

96

48

525

480

10

2

33

640 x 480

Yes

Yes

H(Pixels) +

37.879

1056

800

40

128

88

2 V(Lines) +

40.00

60.317

628

600

1

4

23

800 x 600

Yes

Yes

H(Pixels) -

48.363

1344

1024

24

136 160

3

V(Lines)

-

65.00

60.0

806

768

3

6

29

1024 x 768

Yes

Yes

H(Pixels) +

79.976

1688

1280

16

144 248

4

135.00

1280 x 1024

Yes

Yes

V(Lines) +

75.025

1066

1024

1

3

38

H(Pixels) + 5
V(Lines) +

148.50

67.50 60

2200

1920

88

44

148

1920 x 1080

Yes

Yes

1125

1080

4

5

36

H(Pixels) +

84.364

2200

1920

88

44

148

6

185.60

1920 x 1080

Yes

Yes

V(Lines) +

74.990

1125

1080

4

5

36

H(Pixels) +

137.26

2080

1920

48

32

80

7

285.50

1920 x 1080

Yes

Yes

V(Lines) +

119.982

1144

1080

3

5

56

H(Pixels) +

111.857

2720

2560

48

32

80

8

304.25

2560 x 1440

Yes

Yes

V(Lines) -

74.971

1492

1440

3

10

39

H(Pixels) +

198.317

2080

1920

48

48

64

*9

412.50

1920 x 1080

Yes

Yes

V(Lines) -

179.961

1102

1080

3

5

14

* 9 Timing : Recommended timing at the HDMI and DP input

2-3. HDMI Video Input
1 2 3 4

Factory support mode
(Preset Mode) 480P 720P 1080P 1080P

Horizontal frequency
(KHz) 31.5 45 67.5 135

Vertical frequency
(Hz) 60 60 60 120

- 6 -

Copyright © 2024 LG Electronics Inc. All rights reserved. Only training and service purposes.

Circuit Block Diagram

AUO-General

- 7 -

Copyright © 2024 LG Electronics Inc. All rights reserved. Only training and service purposes.

EXPLODED VIEW
IMPORTANT SAFETY NOTICE
Many electrical and mechanical parts in this chassis have special safety-related characteristics. These parts are identified by in the EXPLODED VIEW. It is essential that these special safety parts should be replaced with the same components as recommended in this manual to prevent Shock, Fire, or other Hazards. Do not modify the original design without permission of manufacturer.

400 SC1 910 911
900

510 SC6 SC4

532

531 533

540 512
543 TA2

530

SC3

544

700

HC1

HP1

SC5

HS1 120 HL1
TA3

120 560
HR3

CA5

LV1

TA1

200

CA7

300 CA6

Copyright ©

LG Electronics Inc. All rights reserved.

Only training and service purposes.

AUO-General

DISASSEMBLY AND ASSEMBLY PROCESS
0. Tool Required List the type that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed.

Tool Description

Tool information

Screw driver

Crowbar

- 9 -

Copyright © 2024 LG Electronics Inc. All rights reserved. Only training and service purposes.

1. Disassembly flow chart

AUO-General

- 10

Copyright © 2024 LG Electronics Inc. All rights reserved. Only training and service purposes.

AUO-General

- 11

Copyright © 2024 LG Electronics Inc. All rights reserved. Only training and service purposes.

AUO-General

- 12

Copyright © 2024 LG Electronics Inc. All rights reserved. Only training and service purposes.

AUO-General

- 13

Copyright © 2024 LG Electronics Inc. All rights reserved. Only training and service purposes.

AUO-General

- 14

Copyright © 2024 LG Electronics Inc. All rights reserved. Only training and service purposes.

AUO-General

- 15

Copyright © 2024 LG Electronics Inc. All rights reserved. Only training and service purposes.

TROUBLE SHOOTING GUIDE
1. No Power

N
Check the voltage of CD21(19V)

Is power cord connected well?

Y N
Check the voltage of ED2(5V)
Y N
Check the voltage of CD58(3.3V)
Y N
Check the voltage of CD14(1.0V)
Y
Change base board

Change UD1 and re-check it(19v to 5v IC)
Change UD3 and re-check it(5V to 3.3V IC)
Change UD2 and re-check it(5V to 1.0V IC)

AUO-General

- 16

Copyright © 2024 LG Electronics Inc. All rights reserved. Only training and service purposes.

2. No Display

Backlight is on ? (BL_ON = Hi)

N

N

Check the voltage of DB801

Pin1 >40V

Y
Check the voltage of CM1 and check the QM1 output
(5V) Y

N Change the QM1 and re-check it

Check Panel LVDS CLK

N

CNF1(#10,11,

22,23)

Y
N Check the L V D S Cable status

Y

Change Module or T-Con board

U1 checking and change Scaler
Change the LVDS Cable

Change Driver IC

AUO-General

- 17

Copyright © 2024 LG Electronics Inc. All rights reserved. Only training and service purposes.

3. No Display for HDMI input

Check the host signal such as PC and graphic card
Y

Check the HDMI cable is from BOX packing, and connected well or not

Y N
Check the HDMI Jack Status(HDMI)

Change the HDMI Jack

Y N
Check the EDID by I2C
Y
Change Main Scaler IC

EDID data download

4. No Display for DP input
Check the host signal such as PC and graphic card
Y
Check the DP cable is from BOX packing, and connected well or not
Y N
Check the DP Jack Status(DP)
Y
Change Main Scaler IC

Change the DP Jack

AUO-General

- 18

Copyright © 2024 LG Electronics Inc. All rights reserved. Only training and service purposes.

FIRMWARE UPDATE
Required Item :

AUO-General

- 19

Copyright © 2024 LG Electronics Inc. All rights reserved. Only training and service purposes.

AUO-General

- 20

Copyright © 2024 LG Electronics Inc. All rights reserved. Only training and service purposes.

AUO-General

- 21

Copyright © 2024 LG Electronics Inc. All rights reserved. Only training and service purposes.

AUO-General


Microsoft Word 2013