ROBERTS Pro Flooring Installation Kit

16-Oz Double-Faced Mallet

This non-marring, dual-faced mallet delivers powerful taps. Its carbon steel head is forged and coated for rust prevention. It can be used on either side for tapping the pull bar or tapping block. The softer grey side can be used for gently nudging flooring into place.

A 16-ounce (453.6 g) double-faced mallet with a carbon steel head, suitable for flooring installation.

Universal Tapping Block

Engineered to join the edges of vinyl tile, laminate, and hardwood flooring. It features two distinct sides for specific applications: one for vinyl plank and another for laminate/engineered hardwood planks. *Note: Do not use with a metal hammer.*

A tapping block with two sides, labeled 'Laminate & Engineered' and 'Vinyl Tile & Plank'.

Wide Angle Pull Bar

Constructed from heavy-duty steel with an angled design for durability and flexibility, even with prolonged use. This pull bar helps secure tight seams by pulling planks together from the panel ends, especially in hard-to-reach areas. It is compatible with most brands of vinyl, laminate, or wood flooring. Soft felt pads on the bottom protect flooring surfaces from scratches. *Note: Do not use with a metal hammer.*

A wide-angle pull bar made of steel, designed to pull flooring planks together for tight seams.

4-in-1 Expansion Spacers

Includes thirty (30) expansion spacers that provide consistent gaps along walls and thresholds. They accommodate four different gap sizes: 3/8" (9.5 mm), 1/2" (13 mm), 1/4" (6 mm) along the wall, and 1" (25 mm) for thresholds between rooms. These spacers are designed to prevent tipping during installation, allowing flooring to expand and contract with seasonal changes.

A diagram showing four expansion spacer sizes: 1/4" (6mm), 3/8" (9.5mm), 1/2" (13mm), and 1" (25mm), with dimensions indicated.

U.S. Patent No. 12,024,897