Owner's Manual for CARAUDIO-SYSTEMS models including: V5-NTG5-PNP, V5C-M625, V5-NTG5-PNP V.LOGiC Intelligent Solution, V5-NTG5-PNP, V.LOGiC Intelligent Solution, Intelligent Solution, Solution
Version 27.11.2019 V5-NTG5-PNP ge 5 1.2. Setting the DIP switches of the interface-box V5C-M625 DIP 1 on the back of the interface-box V5C-M625 are used to set the monitor type.
File Info : application/pdf, 19 Pages, 841.77KB
DocumentDocumentv.LOGiC Intelligent Solution Interface V5-NTG5-PNP Compatible with Mercedes Benz vehicles with COMAND Online NTG5/5.1 navigation and Audio20 NTG5/5.1 system with 4pin HSD LVDS connector Version 04.04.2024 V5-NTG5-PNP Product features · Interactive lane lines · Own on-screen display and setup · Rear-view camera input · Automatic switching to rear-view camera input on engagement of reverse gear from all operation modes · Front camera input · Manual switching to rear-view camera · 2 trigger outputs (+12V max. 1A), separately adjustable switching events (CAN, ACC, camera, reverse gear) · Compatible with all factory video accessories (e.g. rear-view camera, TV-tuner) · USB update-port for software-updates by consumer Page1 Version 04.04.2024 V5-NTG5-PNP Contents 1. Prior to Installation 1.1. Delivery contents 1.2. Check compatibility of vehicle and accessories 1.3. Setting the DIP switches of the interface-box V5C-M625 1.4. LED's of the interface-box V5C-M625 2. Connection schema 3. Installation 3.1. 3.2. 3.2.1. 3.2.1.1. 3.2.1.2. 3.2.2. 3.2.2.1. 3.2.2.2. 3.2.2.3. 3.2.3. 3.3. 3.4. Connecting interface-box and harnesses LVDS connection After-market front camera Connection to the after-market front camera Settings for connecting an after-market front camera After-market rear-view camera Connection to the after-market rear-view camera Settings for connecting an after-market rear-view camera Settings for OEM rear-view camera Configurable trigger outputs Interactive lane lines Picture settings 4. Operation 4.1. 4.1.1. 4.1.1.1. 4.1.1.2. 4.1.2. 4.2. 4.3. OSD On-screen display OSD Operation Mercedes steering wheel version 1 Mercedes steering wheel version 2 OSD Additional setting options Video-in-motion function Selecting the interface as current video source 5. Specifications 6. Connections (interface-box) 7. Technical support Page2 Version 04.04.2024 V5-NTG5-PNP Legal Information By law, watching moving pictures while driving is prohibited, the driver must not be distracted. We do not accept any liability for material damage or personal injury resulting, directly or indirectly, from installation or operation of this product. This product should only be used while standing or to display fixed menus or rear-view-camera video when the vehicle is moving, for example the MP3 menu for DVD upgrades. Changes/updates of the vehicle's software can cause malfunctions of the interface. We offer free software-updates for our interfaces for one year after purchase. To receive a free update, the interface must be sent in at own cost. Labor cost for and other expenses involved with the software-updates will not be refunded. Page3 Version 04.04.2024 V5-NTG5-PNP 1. Prior to installation Read the manual prior to installation. Technical knowledge is necessary for installation. The place of installation must be free of moisture and away from heat sources. 1.1. Delivery contents Take down the SW-version and HW-version of the interface boxes, and store this manual for support purposes. Interface-box V5C-M625 HW_____ SW_____ LVDS cable CAB-HSD-MF100 V5C-UNI01 harness LVDS cable CAB-HSD-FF150 TV-MBN5 harness 1.1. Check compatibility of vehicle and accessories Requirements Navigation Limitations Factory TV tuner COMAND Online NTG5/5.1, Audio20 NTG5/5.1 with 4pin HSD LVDS connector on the monitor (s-class W222 is not supported) Vehicles with factory TV tuner are not supported Page4 Version 04.04.2024 V5-NTG5-PNP 1.2. Setting the DIP switches of the interface-box V5C-M625 DIP 1 on the back of the interface-box V5C-M625 are used to set the monitor type. The default setting is: Head unit COMAND Online NTG5/5.1, Audio20 NTG5/5.1 (Hi resolution) Audio20 NTG5/5.1 (Low resolution) DIP 1 DIP 2 DIP 3 ON No function No function OFF No function No function After each change of the DIP switch settings you have to execute a power reset of the interface-box! 1.3. LED`s of the interface-box V5C-M625 Valid%input source CAN%ok Power Page5 Version 04.04.2024 V5-NTG5-PNP 2. Connection schema Page6 Version 04.04.2024 V5-NTG5-PNP 3. Installation Switch off ignition and disconnect the vehicle's battery! The interface needs a permanent 12V source. If according to factory rules disconnecting the battery is to be avoided, it is usually sufficient to put the vehicle is sleep-mode. In case the sleep-mode does not show success, disconnect the battery with a resistor lead. If power source is not taken directly from the battery, the connection has to be checked for being start-up proven and permanent. Prior to wire and device installation we suggest to connect and test correct function of all after-market and factory infotainment equipment! The interface is installed on the backside of the head unit. 3.1. Connecting interface-box and harnesses Quadlock female vehicle harness TV-MBN5 harness 6 Interface-box V5C-M625 FRONT V5C-UNI01 5 harness 1 3 4 2 Quadlock male on rear side of navigation 1 Remove the female Quadlock connector of the vehicle harness from the rear of the navigation computer. 2 Remove optical leads from the female Quadlock connector of the vehicle harness and insert them into the female Quadlock connector of harness TV-MBN5 at the same position. 3 Connect female Quadlock connector of vehicle harness to the male Quadlock connector of harness TV-MBN5. 4 Connect female Quadlock connector of harness TV-MBN5 to the male Quadlock connector of the navigation computer Version 04.04.2024 V5-NTG5-PNP Page7 5 Connect female 8 pin molex connector of the harness TV-MBN5 to the male 8 pin molex connector of the harness TV-MBN5. 6 Connect female 12pin AMP connector of the harness TV-MBN5 to the front site of the V5C-M625 interface box. 3.2. LVDS connection LVDS cable CAB-HSD-FF150 1 4 Back of head unit Interface-box V5C-M625 REAR 3 LVDS cable CAB-HSD-MF100 2 4-Pin HSD LVDS female vehicle harness 1 Connect the female 4pin HSD LVDS connector of the LVDS cable CAB-HSD-FF150 to the male 4pin HSD LVDS connector (LVDS-IN) on the rear of the interface-box V5C-M625. 2 Remove the blue female 4pin HSD LVDS connector of the vehicle harness at the back of the head unit and connect it to the male 4pin HSD LVDS of the CAB-HSD-MF100 LVDS cable. 3 Connect the female 4pin HSD LVDS connector of the LVDS cable CAB-HSD-MF100 to the male 4pin HSD LVDS connector (LVDS-OUT) on the rear of the interface-box V5C-M625. 4 Connect the female 4pin HSD LVDS connector of the LVDS cable CAB-HSD-FF150 to the pink male 4pin HSD LVDS connector on the rear of the head unit. Page8 Version 04.04.2024 V5-NTG5-PNP 3.2.1. After-market front camera 3.2.1.1. Connection to the after-market front camera V5C-UNI01 harness 1 Interface-box V5C-M625 FRONT +12V camera power 2 Power Out 1 (max. 1A) Front camera 1 Connect the video RCA of the after-market front camera to the female RCA connector "FRONT CAM" of the interface box V5C-M625. 2- The pink wire of harness V5C-UNI01 can be used for +12V electric power supply (max. 1A) of the after-market front camera. Configure in the OSDmenu "OPTION", menu item "POWER OUT 2" the designated electric power supply (see chapter "Configurable switching outputs"). - Page9 Version 04.04.2024 V5-NTG5-PNP 3.2.1.2. Settings for connecting an after-market front camera You have to configure some settings in the OSD-menus INPUTS and MISC if you want to connect an after-market front camera (Operation of the OSD: see chapter "OSD-Operation"). OSD-menu INPUT OPTION Menu item FVC PARK LOGIC Setting OFF ON RGearOnly RGearSpeed RGearTime Explication Keine Frontkamera angeschlossen Switches to front camera if parking process is enabled and reverse gear is released Enabled while parking process Enabled while parking process and up to 30 km/h Enabled while parking process and up to 20 second Note: You can deactivate the enabled parking process by pressing the "handsfree mode OFF" or "right arrow" button on steering wheel. After deactivation you can't enable the parking process again until the vehicle is diving faster than 30km/h or the ignition is switched off. Page10 Version 04.04.2024 V5-NTG5-PNP 3.2.2. After-market rear-view camera 3.2.2.1. Connection to the after-market rear-view camera Interface-box V5C-M625 FRONT V5C-UNI01 1 harness TV-MBN5 harness Power Out 2 (max. 1A) 2 Rear-view camera 1 Connect the video RCA of the after-market rear-view camera to the female RCA connector "REAR CAM" of the interface box V5C-M625. 2- The green wire of harness TV-MBN5 can be used for +12V electric power supply (max. 1A) of the aftermarket rear-view camera. Configure in the OSDmenu "OPTION", menu item "POWER OUT 2" the designated electric power supply (see chapter "Configurable switching outputs"). Page11 Version 04.04.2024 V5-NTG5-PNP 3.2.2.2. Settings for connecting an after-market rear-view camera You have to configure some settings in the OSD-menus INPUT and OPTION if you want to connect an after-market rear-view camera (Operation of the OSD: see chapter "OSDOperation"). OSD-menu INPUT OPTION Menu item Setting OFF ON RVC RGearOnly PARK LOGIC RGearSpeed RGearTime OFF RVC GRAPHIC LINES Explication No rear-view camera connected Switches to rear-view camera if reverse gear is engaged and/or PDC-display is displayed Enabled while parking process Enabled while parking process and up to 30 km/h Enabled while parking process and up to 20 second Interactive lane lines deactivated Interactive lane lines activated Note: You can deactivate the enabled parking process by pressing the "handsfree mode OFF" or "right arrow" button on steering wheel. After deactivation you can't enable the parking process again until the vehicle is diving faster than 30km/h or the ignition is switched off. 3.2.2.3. Settings for OEM rear-view camera OSD-menu INPUT OPTION Menu item RVC PARK LOGIC Setting OEM RGearSpeed Explication If a factory rear-view camera is existing! The interface turns off, if reverse gear is enabled and it displays factory rear-view camera Enabled while parking process and up to 30 km/h Version 04.04.2024 V5-NTG5-PNP Page12 3.2.3. Configurable trigger outputs Interface-box V5C-M625 FRONT V5C-UNI01 harness TV-MBN5 harness Power Out 1 (max. 1A) 1 Power Out 2 (max. 1A) You can configure the both +12V trigger outputs separately. The pink wire is POWER OUT 1 and the green wire is POWER OUT 2. Note: You can configure the both trigger outputs in the OSD-menu OPTION separately (Operation of the OSD: see chapter "OSD-Operation"). OSD-menu OPTION Menu item POWER OUT1 (pink) POWER OUT2 (green) Setting CAN ACC CAM RGEAR AVS OFF Explication +12V when the interface is on (red LED on) +12V when ignition is on +12V when the rear-view camera input is activated +12V when reverse gear is engaged +12V when interface video-source is active Trigger output deactivated Version 04.04.2024 V5-NTG5-PNP Page13 3.3. Interactive lane lines You have to configure some settings in the OSD-menu OPTION if you want to activate interactive lane lines (Operation of the OSD: see chapter "OSD-Operation"). OSD-menu OPTION Menu item RVC GRAPHIC CAR TYPE Setting Explication OFF Interactive lane lines deactivated LINES Interactive lane lines activated A/B/C/CLA/CLS/ E/G/GLA/GLC/ GLE/GLS/SL/SLC/ V/VITO/ Vehicle type selection 3.4. Picture settings You can change the picture settings in the OSD-menu IMAGE (activation only from interface video level possible). Brightness Contrast Saturation Hue Sharpness Note: The picture settings will be retained for each AV-source separately. Page14 Version 04.04.2024 V5-NTG5-PNP 4. Operation 4.1. OSD On-screen display You can change the basic configurations of the interface in the OSD (on screen display). 4.1.1. OSD Operation You can control the OSD by steering wheel buttons. Set the "radio level" in instrument cluster before you start the OSD control. 4.1.1.1. Mercedes steering wheel version 1 Options Enter Options Long press = enter OSD Page15 Version 04.04.2024 V5-NTG5-PNP 4.1.1.2. Mercedes steering wheel version 2 Options Enter Options Long press = enter OSD 4.1.2. OSD Additional setting options The following settings in the OSD-menus OPTION and OSD can be configured over and above the described settings in this manual (Operation of the OSD: see chapter "OSD-Operation"): OSD-menu OSD INFO OPTION Menu item POS. X POS. Y SIZE OSD TIMEOUT VERSION FACTORY RESET Setting 0-xxx 0-xxx SMALL LARGE 2-20 X.XX.XX Explication Horizontal position of the OSD Vertical position of the OSD Small OSD menu windows Large OSD menu windows Time setting for automatic OSD shutoff Displays the current SW-version Resetting to factory settings Version 04.04.2024 V5-NTG5-PNP Page16 4.2. Video-in-motion function It is possible to activate and deactivate the video-in-motion in the OSD menu "OPTION" (Operation of the OSD: see chapter "OSD-Operation"). OSD-menu OPTION Menu item VIM Setting ON OFF Explication Video-in-motion activated Video-in-motion deactivated For the V5-NTG5-PNP the video-in-motion function is permanently active without disturbing the navigation performance. 4.3. Selecting the interface as current video-source Long press = enter / leave interface level Short press = switch video sources Long press "handsfree mode OFF" respectively long press "right arrow" button to choose the interface as current video source. Short press "hang-up" button switch the video sources (cameras). Each short press will switch to the next enabled input. If all inputs are enabled the order is: FRONT CAM à REAR CAM à ... Inputs which are not enabled are skipped. Version 04.04.2024 V5-NTG5-PNP Page17 5. Specifications Operation voltage 10.5 14.8V DC Stand-by power drain <0,1mA Operation power drain 190mA Power consumption 2,6W Temperature range -20°C to +80°C Weight (box only) 285g Measurements (box only) B x H x T 141 x 30 x 105 mm 6. Connections (interface-box) Interface-box V5C-M625 REAR Male 4pin HSD LVDS connector Male 12pin AMP connector Male 4pin HSD LVDS connector Front camera input 7. Technical Support CAS GmbH manufacturer/distribution In den Fuchslöchern 3 D-67240 Bobenheim-Roxheim email support@casgermany.com Rear-view camera input Interface-box V5C-M625 FRONT Female update-connector Mini USB Legal disclaimer: Mentioned company and trademarks, as well as product names/codes are registered trademarks ® of their corresponding legal owners. Page18 Version 04.04.2024 V5-NTG5-PNPmacOS Version 13.5 (Build 22G74) Quartz PDFContext