INMOTION

Product Overview and Controls

The headphones feature the following controls and ports:

• [ANC On/Off] Button
• [Volume Up/Next Song] Button
• [Volume Down/Previous Song] Button
• [USB Charging Port]
• [Multi-Function Button] (Power On-Off/Make-End Phone Calls/Play-Pause/Google-Siri Voice Assistant)
• [3.5mm Aux Port]
• [Microphone]

Diagram Description: The image depicts a pair of over-ear headphones. Key components are indicated by labels pointing to the earcups and headband, showing the location of buttons for ANC, volume control, multi-function operations, a USB charging port, an auxiliary audio input, and a microphone.

Contents

• Headphone x 1
• Charging Cable (USB-A to Micro-USB)
• Audio Cable (3.5mm AUX to 3.5mm AUX)

Charging

Plug the provided charging cable into the Micro-USB port located under the left ear-cap of the headphone. Connect the other end to a USB port on your computer or another compatible charging device. The LED indicator will turn red while charging and change to blue when fully charged. A full charge takes approximately 2.5 hours.

Power ON/OFF

Power ON: Press and hold the Multi-Function button for approximately 3 seconds. The headset will enter Bluetooth search mode, indicated by a quick, alternating red/blue flashing light and a "Power On" prompt tone.

Power OFF: Press and hold the Power button for approximately 3 seconds. The red light will turn off, accompanied by a "Power Off" prompt tone.

Headphone Pairing

1. Ensure your phone or Bluetooth device is switched on.
2. To pair for the first time, switch on the headset. It will enter search mode with flashing red/blue lights. If previously paired with another device, ensure that device is switched off.
3. On your phone or device, ensure Bluetooth is enabled and search for wireless devices.
4. Select "InMotion" from the list of found devices. Upon successful pairing, you will hear a "Connected" prompt tone and the light will turn blue.

Previously paired headphones will automatically connect to the device if it is on and within range. If not, the headphones will enter standby mode with a continuous blue light.

Functions

• Active Noise Cancelling (ANC) On: Press the ANC button. The LED will turn green. ANC is functional with both wireless and wired connections.
• Active Noise Cancelling (ANC) Off: Press the ANC button again. The green LED will turn off. ANC must be manually deactivated.
• Adjust the Volume: Long press the [+] or [-] buttons during a call or while listening to music to increase or decrease the volume. A warning tone will sound when the maximum volume is reached.
• Listen to Music: Connect the headphones to your device. Music functions are dependent on the Bluetooth device. Music will pause automatically when a call is made or received and resume after the call ends. To play a song, select it in your music player. Press the Play/Pause function on the Multi-Function button to pause or resume playback. To skip to the next song, quickly press the volume down button. To go to the previous song, quickly press the volume up button.
• Answer / End a Call: Quickly press the Multi-Function button to answer an incoming call. A long press (approx. 1.5 seconds) will reject the call. To end an active call, press the Multi-Function button.
• Voice Assistant: Activate your device's voice assistant by pressing the Multi-Function button twice.
• Disconnect the Headphone: To disconnect, either switch off the headphones or manually disconnect them from your device's Bluetooth menu.
• Reconnect the Headphone: To reconnect to a previously paired device, switch on the headphones or re-establish the connection via your device's Bluetooth menu.
• Wired Connection: The headphones can also be used with a wired connection. Connect your device using the provided 3.5mm AUX cable. Inserting the audio cable will disable wireless functionality.

Technical Specifications

• Bluetooth version: 5.0
• Working range: up to 10m (33ft.)
• Frequency response: 20Hz to 20kHz
• Driver unit: 40mm
• Impedance: 32Ω±15%
• Headset Sensitivity: 100±3dB(@ 1kHz)
• Input: DC 5V/500mA
• Battery: Rechargeable Lithium ion battery; 3.7V, 250mAh
• Charging time: 2.5 hours
• Working time: 12 hours with 50% Volume

Caution

1. To prevent damage, scratches, or deformation, turn off the headset and store it in its box when not in use for extended periods. To maintain battery health, charge the device every 3 months.
2. If the headset has been unused for a long time, please charge it before first use.
3. The battery is original and should not be replaced by the user.
4. Keep the headset in a dry environment.
5. Do not expose the product to temperatures exceeding 60°C or place it near fire to prevent battery explosion.
6. Avoid bending or twisting the headband bracket to prevent deformation.
7. Do not attempt to remove ear-cushions unless you are a qualified technician.
8. Avoid prolonged listening at very high volumes. If you experience tinnitus, reduce the volume or stop playback. Gradually increase volume to avoid hearing damage.
9. Do not use the headset in hazardous locations or situations where it is important to hear ambient sounds.

Supplier/Manufacturer Information

UK Sales: WH Smith, SN3 3RX UK

USA Sales: IMEG LLC, 3755 W Sunset Rd Suite A, Las Vegas, NV 89118

EU Sales: WH Smith Ireland Limited, 6th Floor, 2 Grand Canal Square, Dublin 2, ROI

Produced in: China

FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio / TV technician for help.

Certification Marks: CE, UKCA, FC