CF 600 Robotic Pool Cleaner
This manual provides essential information for the installation, use, and maintenance of the CF 600 robotic pool cleaner. It is important to read and understand this document before operating the device.
Safety Instructions
- Always turn off the power before placing or removing the cleaner from the pool to prevent damage.
- Connect the power cable to a socket with a leakage protection device. Do not allow anyone to enter the pool while the cleaner is operating.
- Use the handle to place and remove the cleaner from the pool. Do not pull by the cable.
- Before starting the cleaner, ensure all air is expelled from the machine to ensure normal operation.
- The filter basket must be installed before operation, and the cable should be untangled to prevent damage.
- Clean the filter basket after each use to maintain optimal performance.
- Store the cleaner indoors in a cool, ventilated area, away from direct sunlight, when not in use.
- The power control box should be placed in the shade during operation. Do not cover it to prevent overheating.
- Unauthorized disassembly of the cleaner or power control box is prohibited.
- Connect the power supply to nearby pool installations with safety cables.
- Do not use the machine outside its specified operating conditions. Read the manual carefully before use.
- Different density filter baskets can be used for seasonal cleaning. Contact an agent for purchase.
- Ensure the pool water pH is between 7.0-7.2.
- Do not add water treatment chemicals into the machine for distribution. The manufacturer is not liable for damage caused by such use.
Product Description
The CF 600 is a high-end robotic pool cleaner featuring advanced technology, including sensors, intelligent path planning, autonomous pool adaptation, obstacle negotiation, efficient dirt suction, and precision filtration. It is suitable for medium and large pools and can operate on various pool surfaces like PVC, tiles, and cement. The machine is equipped with a 3-motor control system to prevent cable tangling and a secondary filtration system for fine dust. Its high-precision gyroscope and infrared sensors, combined with a multi-sensor integration algorithm, enable optimal path planning for effective cleaning.
The main body of the machine is powered by a low-voltage DC 28V power supply, ensuring safety and reliability.
List of Supplied Materials
| S/N | Name | Specifications | Quantity (pieces) | Remarks |
|---|---|---|---|---|
| 1 | Cleaner body and cable | CF 600 | 1 | In the box |
| 2 | Power supply unit | Power I 130 | 1 | In the box |
| 3 | User manual | 1 | In the plastic bag |
Specifications
- Input voltage: 100~240VAC
- Frequency: 50 Hz/60 Hz
- Output voltage: DC28V
- Power supply power: 130W; Machine power: 100W
- Operating time: 1h/2h/3h
- 4 operating modes: Entire pool, pool floor, pool wall, waterline
- Water filtration: approx. 15 m3/h
- Filtration fineness: 180μ
- Travel speed: 11 m/min~16 m/min
- IP rating: Cleaner IPX8, Power supply unit IPX5
- Machine control via Bluetooth and application
- Ambient operating temperature: 0~+40 °C
Pool Water Conditions
Recommended pool water parameters:
- pH: 7.0-7.4
- Temperature: 50 °F -95 °F (10°C-35 °C)
- Salt: max. 5,000 ppm
- Chlorine: Max. 2 ppm
Usage
Installation
The power control unit should be placed in a suitable location to ensure the cleaner can reach all areas of the pool. The unit should be positioned within 3.5 meters of the pool edge.
[Diagram showing power unit placement relative to pool edge and cleaner]
Immersion of the Cleaner
When placing the cleaner in the pool, ensure the bottom faces the pool wall. Hold the handle and lower the cleaner into the water. The cleaner will gradually expel air. Ensure all air is released for normal operation. Allow the machine to sink to the pool floor.
[Diagram showing correct and incorrect immersion of the cleaner]
Getting Started
Power Button:
- Long press (3 sec): Start/Stop
- Short press (after starting): Standby/Automatic operation
Backlight Indicator Status:
- Solid: Standby
- Pulsating: Automatic operation
- Flashing: Fault status
Bluetooth Button:
- Used with the application. Press and hold for 3 seconds to connect the cleaner via Bluetooth using the provided username and password.
Backlight Indicator Status (Bluetooth):
- Flashing for 1 sec during pairing.
- Solid after connection.
Application Connection
Download the Application:
- For Android phones: Search for the WYBOT application on Google Play and download it.
- For iPhones: Search for the WYBOT application on the App Store and download it.
Connecting the Machine:
- Turn on the machine; the indicator light will be blue and remain lit.
- Connect the application to the machine within 20 seconds of startup.
- Upon successful connection, the application will display a "Success" notification.
- The application interface will show the current machine parameters, which can be modified by the user (cleaning area, duration).
- After selecting parameters, click "Confirm".
- After restarting, the machine will execute the cleaning program based on the preset parameters.
Note:
- Bluetooth and location service permissions must be granted for application use.
- The application is compatible with iOS 14 and later, and Android 8.0 and later.
- Enable location services to receive weather information within the application.
Maintenance
Cleaning the Filter
After cleaning is complete, remove the pool cleaner. Press the button on the rear of the robot to automatically open the top cover. Lift the top cover, remove the filter basket, empty debris, and rinse the filter basket with clean water.
[Diagram showing the location of the cover release button and the filter basket removal]
A foam filter is located behind the filter basket. It is recommended for regular pool floor cleaning when the water is not very dirty, providing finer filtration for clearer water.
Do not use the foam filter at the beginning of the season or when there is a large amount of debris.
[Diagrams showing different types of filter baskets]
Warranty
- This product is covered by a 24-month warranty for the drive kit and control box from the date of purchase. Consumable parts, including the filter basket, brush, wheels, and nozzles, are not covered.
- The warranty is void if the product has been modified, misused, or repaired by unauthorized personnel.
- The warranty covers manufacturing defects only and does not cover damage resulting from improper handling by the owner.
- The order number or invoice must be presented for any warranty claims or repairs.
Aqualux SAS
ZA de la Massane
287 route de la Massane
13210 St Rémy de Provence
France
support@cf.group
+33 (0)9 70 72 5000
[CE and RoHS logos]
Environmental Programs, European Directive WEEE
Please comply with European Union regulations and contribute to environmental protection. Return used electrical equipment to a designated municipal facility for proper recycling. Do not dispose of in unsorted waste bins. For items with removable batteries, remove batteries before disposal.
