Philips Hue Runner Spotlight

About This Manual

This document provides comprehensive instructions for installing and operating the Philips Hue Runner spotlight, a personal wireless lighting solution. It details included components, safety precautions, step-by-step installation procedures, and operational guidance.

Languages found in this document: English, German (Benutzerhandbuch), French (Notice d'emploi), Spanish (Manual de usuario), Portuguese (Manual do usuário), Italian (Manuale d'uso).

Please note your Hue serial number, typically found on the product or its packaging.

Included and Excluded Items

Included Components:

• Item A: Philips Hue Runner Spotlight Fixture
• Item B: Philips Hue Remote Control
• 1 x CR2032 Battery for the remote control
• Extension Switch (may vary by package)

Excluded Items (Tools Required for Installation):

• Drill [Drill]
• Wall Anchors [Wall Anchor]
• Screws [Screw]
• Screwdriver [Screwdriver]
• Pencil [Pencil] for marking

Safety and Usage Precautions

Please observe the following symbols and guidelines:

• [!] Always turn off power at the main circuit breaker before beginning installation.
• [Indoor Use Only] This product is designed for indoor environments only.
• [3m Distance from Water] Maintain a minimum distance of 3 meters from water sources.
• [Do Not Cover] Do not cover the fixture or its components.
• [Earth Symbol] Ensure proper electrical grounding.
• [Cable 3/8" 8mm] Use appropriate cable size (3/8" or 8mm).
• [Keep >5cm Distance] Maintain at least 5cm distance from the ceiling for adequate ventilation.
• [No Dimmer Switch] Do not connect this fixture to a dimmer switch.
• [GU10 Bulb Type] Use only GU10 type light bulbs.
• [Max 5.5W] The maximum power consumption per bulb is 5.5 Watts.
• [LED Bulbs Only] This fixture is compatible with LED bulbs only.
• [No Cross-over Wiring] Ensure correct wiring; do not cross wires.
• [E Symbol] Indicates energy efficiency rating.

Installation Guide

1. Step 1: Power Disconnection

   [!] Ensure the power supply to the installation area is switched OFF at the circuit breaker.

2. Step 2: Mount the Base Plate

   Mark the desired location for the fixture using a pencil [Pencil]. Drill holes [Drill] and insert wall anchors [Wall Anchor]. Secure the mounting bracket or base plate to the ceiling or wall using screws [Screw] (1, 2).

3. Step 3: Wire Connections (Junction Box)

   Open the junction box. Connect the wires from the power supply to the appropriate terminals within the box, ensuring secure connections.

4. Step 4: Connect Spotlight Wires

   Connect the wires from the spotlight fixture to the corresponding terminals in the junction box. Push wires into terminals [Wire Terminal] and secure them with a twist [Twist Secure]. Repeat this process for all spotlights.

5. Step 5: Attach Spotlight Fixture

   Align the spotlight fixture with the mounting bracket. Secure the fixture firmly using screws [Screw].

6. Step 6: Final Checks

   Verify all electrical connections are secure and the fixture is properly mounted [✓]. Ensure no incorrect mounting methods are used [X].

Adjusting the Spotlight Head

The spotlight head can be adjusted to direct light as needed:

• Horizontal Adjustment: Approximately +/- 350° [Horizontal Adjustment +/- 350°].
• Vertical Adjustment: Approximately +/- 90° [Vertical Adjustment +/- 90°].
• Tighten the adjustment screws [Screw] to maintain the desired position.

Operating Your Philips Hue Runner

1. Step 1: Power Restoration

   [!] Turn the power supply back ON at the circuit breaker.

2. Step 2: Install Light Bulb

   Install a GU10 light bulb [GU10 Bulb Type] into the spotlight socket.

3. Step 3: Identify Hue Serial Number

   Locate the Hue serial number (S/N XXXXXX) on the installed bulb.

4. Using the Hue Remote Control

   The included Hue remote provides wireless control for your lighting system.

   Initial Setup/Pairing:

   [!] Press and hold the [Hue Button] on the remote for approximately 3 seconds until the LED indicator blinks [LED Blink].

   Remote Control Functions:

   • Click: Turns the light(s) on or off [Click] [On/Off].
   • Hold: Dims the light up or down [Hold] [Dim Up/Down].
   • Hue Click: Cycles through preset lighting scenes [Hue Click] [Scene Cycle].

   Available Scenes:

   • Relax
   • Concentrate
   • Energize

5. Mounting the Hue Remote

   Mounting materials are not included [!]. The remote can be attached to a wall plate or a magnetic surface, such as a refrigerator [Magnet Symbol].

Further Information and Support

• For product connection and setup assistance, scan the QR code or visit: www.philips-hue.com/connectproduct [QR Code].
• For additional support, FAQs, and product information, visit: www.philips-hue.com [Question Mark Symbol].