Safety and Caution Information
Please read the following safety information carefully to ensure safe operation and prevent damage.
⚠️ AC Power Adapter: Use only the AC adapter provided with the device. Using a different adapter may cause electric shock, fire, or burns. The adapter is designed for indoor, dry locations and rated for temperatures between 0°C and 35°C (32°F and 95°F). Connect only to a properly wired and grounded outlet.
⚠️ Battery: There is a risk of explosion if the battery is replaced with an incorrect type. Batteries should be recycled whenever possible. Dispose of used batteries in accordance with local environmental regulations.
⚠️ Power Adapter Usage: Failure to use the included power adapter may violate regulatory compliance requirements and expose the user to safety hazards.
⚠️ Temperature: This device is intended for use in ambient temperatures between 0°C and 35°C (32°F and 95°F). Avoid using or storing the device near heat sources, in direct sunlight, or outside these specified temperature ranges.
⚠️ Medical Devices: This device may interfere with the operation of some pacemakers, hearing aids, or other medical devices. To reduce risks, maintain a separation distance of 20 cm (8 inches) between the device and the medical device. Refer to the medical device's documentation for additional information.
⚠️ Modifications: Modifications to the wireless solution, thermal solution, device components, or enclosure are not permitted. Such modifications violate regulatory compliance requirements and can lead to safety hazards.
FCC Compliance
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
Connecting to a Network
To connect to a network:
- Click the network icon in the notification area in Windows.
- Select the desired network from the list and input any required information (e.g., password for secured networks).
