Phoenix Planet HS6070 Safe

Guarantee Registration

Please submit your guarantee registration by visiting our website www.phoenixsafe.com and clicking on "Register Safe".

Opening the Safe

• Key Locking Safe: Please insert one of the two keys supplied into the keyhole and turn clockwise, then pull the door to open.
• Electronic Locking Safe: Please see the operating manual provided separately for opening your electronic locking safe.

Base Fixing

To base fix your safe, use the following instructions.

Choosing a Place to Install Your Safe

• Look for a place that does not restrict access and the swing of the door.
• Ensure that the floor is level.
• For best results, a concrete floor is preferable.
• Using a pencil, mark through the fixing holes.

Base Fixing Instructions

Supplied in Box

• M16 x 180mm Anchor Bolt

You Will Require

• Socket Wrench
• Brush
• Hammer
• 16mm Drillbit
• Drill

Steps for Base Fixing

1. Drill a 160mm deep hole with a 16mm drillbit.
2. Remove debris with the brush.
3. Insert anchor bolt and tap down with a hammer.
4. Screw anchor bolt until fully tightened.

ECB-S Certification

The European Certification Body GmbH accredited according to ISO/IEC 17065 awards to Phoenix Safe Co. Ltd. the right to carry the ECB•S certification mark for Safes of resistance grade IV according to EN 1143-1:2012 and ECB•S C10 (clause 3.1.11).

Certificate Number: 1407/SA18-04

Valid From: 26 April 2018

Valid Until: 4 March 2022

Certification Body: European Certification Body GmbH

Support

Website: www.phoenixsafe.co.uk

Email: info@phoenixsafe.co.uk

Phone: +44 (0) 151 944 6444