FSP TECHNICAL DATASHEET 45W Adapter FSP045-RXXN3

FSP045-RXXN3 Series

FEATURES

Certified IEC 62368-1 & CB 60950-1
Peak current function
Meet Energy Efficiency DOE Level VI
Meet Code of Conduct Version 5 Tier 2
High Reliability
Low Profile
Over Current Protection
Over Temperature Protection
Over Voltage Protection
With PFC Circuit

SAFETY STANDARD APPROVAL

CULUS LISTED I.T.E. POWER SUPPLY E190414

TÜVRheinland ZERTIFIZIERT geprüfte Sicherheit

AGSCEFC Tested to Comply With FCC Standards FOR HOME OR OFFICE USE

www.tuv.com ID 1000000000

DESCRIPTION

This product is a 45 watts AC to DC adapter intended for use in IPC systems, embedded systems, printers, monitors, Charging system and POS systems, that have a high wattage demands. This adapter operates at 90 to 264 VAC input voltage. The unit meets CISPR32 EN55032 CLASS B, EN55024 and FCC PART 15B Class B emission limits and is designed for ITE application.

INPUT SPECIFICATIONS

Parameter	Value
Input voltage	90-264 VAC
Input frequency	47-63 Hz
Input current	100Vac, 240Vac / full load ≤ 1.5A
No load power consumption	115Vac, 230Vac ≤ 0.075W
Touch current	264Vac/50Hz ≤ 0.25mA

OUTPUT SPECIFICATIONS

Output voltage/current: See rating chart
Total output power: See rating chart
Protection:
- Over voltage: The adapter will enter into shut down (no output) if over voltage occurs at the output terminal due to an internal fault. The output trip voltage shall not exceed 28.5V. The unit returns to normal state by AC reset.
- Short circuit & Over current: When an internal fault occurs, or an external fault is applied to the output, the power supply shall shut down and enter auto-recovery mode.
- Over temperature: The power supply will enter into shut down when abnormal thermal rise occurs. It returns to normal state by AC reset.
- Brown-out: Shutdown and no damage.

ENVIRONMENT

Working TEMP.: 0~70°C (> 40°C de-rating)
Storage TEMP.: -20~+80°C
Working Humidity: 20~80% RH non-condensing
Storage Humidity: 10~90% RH non-condensing

ADDITIONAL INPUT SPECIFICATIONS

Parameter	Value
Power factor	N/A
Efficiency	See rating chart
Power turn-on time	At 100Vac / full load, output voltage shall remain regulation ≤ 3Sec
Hold-up time	At 100Vac or 240Vac / full load, output voltage shall remain regulation ≥ 5ms
Inrush current	100Vac, 240Vac / full load: Shall be less than the rating of adapter critical component (including rectifiers, fuse, surge and current limiting device)
Operating altitude	5000 meters above sea level
Withstand voltage	Between AC input and secondary applied DC 4000V, test time 1 minute, cut off current shall be less than 10mA
MTBF	100Vac, 240Vac / full load, 300,000 hours at 25°C, standard SR332

EMC PERFORMANCE

Standard	Performance
EN55032	Class B conducted, class B radiated
FCC	Class B conducted, class B radiated
VCCI	Class B conducted, class B radiated
EN61000-3-2	N/A (<75W)
EN61000-3-3	Meet regulation
EN61000-4-2	Air discharge: ±15 KV, contact discharge: ±8KV, meet criterion A
EN61000-4-3	80~1000 MHz, 3V/m, 80% AM(1kHz), meet criterion A
EN61000-4-4	Impulse: ±1kV applied to L,N, meet criterion A
EN61000-4-5	±1kV applied differential mode, meet criterion A, ±2kV applied common mode, meet criterion A
EN61000-4-6	0.15~80 MHz, 3Vrms, 80% AM(1kHz), meet criterion A
EN61000-4-8	50 Hz or 60Hz, 1A/m, meet criterion A
EN61000-4-11	Voltage Dips: >95% reduction for 0.5 period, meet criterion A; 30% reduction for 25 period, meet criterion B. Voltage Interruptions: >95% reduction for 250 period, meet criterion B.

POWER DE-RATING

100Vac or 240Vac, 0°C to 40°C, 100% load; 50°C, 80% load; 60°C, 60% load; 70°C, 50% load. (Shall be less than the rating of adapter critical component, follow FSP specification (adapter)).

INPUT VOLTAGE DERATING CURVE

Graph Description: The Input Voltage Derating Curve shows the relationship between input voltage (Vac) on the x-axis and % Output Power on the y-axis. The output power remains at 100% from 90V up to approximately 240V, after which it begins to derate.

OUTPUT POWER DERATING CURVE

Graph Description: The Output Power Derating Curve shows the relationship between ambient temperature (°C) on the x-axis and % Max Load on the y-axis. The adapter operates at 100% max load up to 40°C, after which it derates, reaching approximately 50% load at 70°C.

OUTPUT VOLTAGE/CURRENT RATING CHART

Model	Output Voltage	Output Current	AC Inlet	Efficiency (DOE Level VI)	Efficiency (CoC V5 Tier 2)
FSP045-RBBN3	19V	2.37A	C6	87.73%	88.97%
FSP045-RBCN3	19V	2.37A	C8	87.73%	88.97%
FSP045-RABN3	24V	1.87A	C6	87.73%	88.97%
FSP045-RACN3	24V	1.87A	C8	87.73%	88.97%

MECHANICAL SPECIFICATIONS

FSP045-RACN3 & FSP045-RBCN3 Dimensions

Diagram Description: This diagram shows the mechanical dimensions for the FSP045-RACN3 and FSP045-RBCN3 models. Key dimensions include:

Overall length: 108.3±1.0 mm [4.267±0.039 in]
Width: 46.3±1.0 mm [1.824±0.039 in]
Height: 30.0±1.0 mm [1.182±0.039 in]
Wire specifications: WIRE NO: UL1185, GAUGE: 20AWG
Cable length: 1200±30 mm [47.244±1.181 in]
Connector plug dimensions: Ø15.0 mm [0.591 in] diameter, 26.0 mm [1.024 in] length.
Connector plug type: PLUG: 5.5*2.5*9.5, described as 'fork groove type' with the fork retracted 0.5mm.
Other dimensions provided include 15.9 mm [0.627 in], 14.3 mm [0.565 in], 80±15 mm [3.15±0.591 in], 30±5 mm [1.181±0.197 in], 9.5±0.3 mm [0.374±0.012 in], Ø5.5±0.1 mm [0.216±0.004 in], 2.5+0.1 mm [0.098+0.004 in].

FSP045-RABN3 & FSP045-RBBN3 Dimensions

Diagram Description: This diagram shows the mechanical dimensions for the FSP045-RABN3 and FSP045-RBBN3 models. Key dimensions include:

Overall length: 108.3±1.0 mm [4.267±0.039 in]
Width: 46.3±1.0 mm [1.824±0.039 in]
Height: 30.0±1.0 mm [1.182±0.039 in]
Wire specifications: WIRE NO: UL1185, GAUGE: 20AWG
Cable length: 1200±30 mm [47.244±1.181 in]
Connector plug dimensions: Ø15.0 mm [0.591 in] diameter, 26.0 mm [1.024 in] length.
Connector plug type: PLUG: 5.5*2.5*9.5, described as 'fork groove type' with the fork retracted 0.5mm.
Other dimensions provided include 15.9 mm [0.627 in], 14.3 mm [0.565 in], 80±15 mm [3.15±0.591 in], 30±5 mm [1.181±0.197 in], 9.5±0.3 mm [0.374±0.012 in], Ø5.5±0.1 mm [0.216±0.004 in], 2.5+0.1 mm [0.098+0.004 in].

CONNECTOR SPECIFICATIONS

Diagram Description: This diagram details the connector specifications, including pinout and dimensions. The cable has a total length of 1200±30 mm. The connector plug is 5.5*2.5*9.5 mm, described as 'fork groove type' with the fork retracted 0.5mm. The cable includes a ground wire with a heat shrink sleeve extending 4.5mm into the SR. The wire is UL1185, 20AWG. Key dimensions for the connector and cable assembly are provided, including wire colors (BLK for negative, WHT for positive), and various measurements like Ø5.5±0.1 mm, 2.5*45°, Ø11.0, Ø8.5, etc.

	FSP045-RXXN3 45W AC-DC Adapter Technical Datasheet Technical datasheet for the FSP045-RXXN3 series 45W AC-DC adapter. Details specifications, features, safety approvals, and performance for IPC, embedded systems, and POS applications. Compliant with DOE Level VI and CoC V5.
	FSP045-RXXN3 Series: 45W AC to DC Adapter Technical Datasheet Detailed technical datasheet for the FSP045-RXXN3 series 45W AC to DC adapters, covering input/output specifications, safety approvals, performance, and mechanical details. Designed for IPC, embedded systems, printers, monitors, and POS systems.
	FSP Switching Power Adapter CCC Certification - FSP045-RABN3, FSP045-RBBN3 Official China Compulsory Product Certification (CCC) for FSP Group's Switching Power Adapters, models FSP045-RABN3 and FSP045-RBBN3, detailing compliance with relevant safety standards.
	FSP Switching Power Adapter FSP045-RBBN3, FSP045-RABN3 CB Test Certificate CB Test Certificate for FSP Group Inc. Switching Power Adapter models FSP045-RBBN3 and FSP045-RABN3, certified according to IEC 62368-1:2018, issued by TÜV Rheinland Japan Ltd.
	FSP Switching Power Adapter CB Test Certificate - FSP045-RBBN3, FSP045-RABN3 Official CB Test Certificate for FSP Switching Power Adapters, models FSP045-RBBN3 and FSP045-RABN3, certified according to IEC 62368-1:2018.
	FSP Switching Power Adapter Compliance Verification - FSP045-RABN3, PUP45N3S Series Official verification of compliance for FSP Switching Power Adapters, including models FSP045-RABN3, FSP045-RBBN3, PUP45N3S-14, and PUP45N3S-13-2, tested against FCC and ISED standards.
	FSP Switching Power Adapter Compliance Verification - Models FSP045-RABN3, FSP045-RBBN3, PUP45N3S Official verification of compliance for FSP Group Inc. switching power adapters, including models FSP045-RABN3, FSP045-RBBN3, PUP45N3S-14, and PUP45N3S-13-2, tested against FCC and ISED standards.
	FSP Switching Power Adapter Compliance Verification Verification of Compliance for FSP Switching Power Adapters, including models FSP045-RABN3, FSP045-RBBN3, PUP45N3S-13-2, and PUP45N3S-14, tested against various EMC and safety standards by Compliance Certification Services Inc.