Kohler Verdera Medicine Cabinet K-99003
Features
- Vertically adjustable 3x magnifying mirror on inside of door.
- Three adjustable tempered-glass shelves.
- Full-overlay mirrored door.
- Mirrored interior.
- Slow-close door prevents slamming.
- Two-way adjustable hinges with 108° opening capability for easy cabinet access.
- Can be installed with left- or right-hand swing.
- Includes mounting hardware for surface or recessed installation.
Material
- Anodized aluminum construction with a durable rustproof and chip-resistant finish.
- Anodized aluminum construction with a durable rustproof and chip-resistant finish.
Codes/Standards
None Applicable
Warranty
KOHLER® One-Year Limited Warranty. See website for detailed warranty information.
Installation
Requires K-99012 or K-99675 side mirror kit (sold separately) for surface-mount installation.
Required Products/Accessories
- K-99675 Medicine Cabinet Wood Side Kit
- K-99012 mirrored side kit for medicine cabinet
Recommended Products/Accessories
- K-23723 Faucet cleaner
Optional Products/Accessories
- K-25064 Joining Kit
Technical Information
All product dimensions are nominal.
Dimensions:
- Width: 18-3/8" (467 mm)
- Height: 30" (762 mm)
- Depth: 5-3/4" (146 mm)
- Cabinet Depth: 4-3/4" (121 mm)
- Door Thickness: 1-1/4" (32 mm)
- Hinge Opening: 108°
Notes:
Install this product according to the installation guide.
IMPORTANT! For recess mounting, the wall cavity must be framed and cabinet secured to framing studs. Reroute any electrical wires or water supply piping from the wall cavity. If you encounter drain or vent piping, or if your wall is load-bearing, consult a professional before proceeding.
For surface mounting, use anchors (not provided) rated for the loaded weight of this product. Refer to the anchor manufacturer's instructions.
When determining the height of the cabinet, ensure the mirrored door will clear all obstacles (such as a faucet). A minimum distance of 3" (76 mm) is required.
This cabinet is designed for either right or left door swing. Check for obstructions.
Cutout for recess-mount installation: