AEG 6000 Cordless Cleaner

Accessories

The following accessories may vary depending on the model:

• Yearly Performance Kit (ESKW6)
• Home and Car Kit (AKIT23)
• Duster Kit (AKIT22)
• Extra Battery 2.5Ah/54Wh (ZE186)
• PetPro (ZE182)
• PowerPro Hard Floor Nozzle (AZE156)
• PowerPro Mop Nozzle (ZE187)
• Standard Pads (AZE158)
• Delicate Pads (AZE159)
• Duster (AZE146)
• Floor Stand (ZE188)

Accessories are suitable for 'Carpet' or 'Hard Floor' as indicated.

For support and further information, visit support.emea.aeg.com or www.aeg.com.

Assembly and Charging

Follow the diagrams for correct assembly. The cleaner can be mounted on a wall bracket for charging and storage.

Charging indicators show battery status: 4.5h for 100% charge, with levels for 75-100%, 50-75%, 25-50%, and 0-25%.

The cleaner features a main unit, wand, and various floor nozzles. Attachments click into place.

The display shows battery level and operational status. Buttons include power on/off and mode selection.

Operation

The cordless cleaner is designed for efficient cleaning. Different nozzles are provided for various surfaces and tasks.

Display Indicators:

• Battery level indicator
• Filter status indicator (triangle symbol)
• Water droplet symbol (potential overheating or blockage)
• Percentage indicator (mode selection)
• Power button (ON/OFF)

Usage Tips:

• Ensure the dustbin is not filled beyond the 'Max' line.
• Select the appropriate nozzle for the surface being cleaned.

Maintenance

Regular maintenance ensures optimal performance.

• Dustbin Emptying: Open the dustbin and empty its contents.
• Filter Cleaning: Filters should be cleaned regularly. The main filter can be rinsed with water (max 40°C) and must be dried for at least 24 hours before reinsertion.
• Brush Roll Cleaning: Remove the brush roll from the nozzle and clean it of hair and debris. Some brush rolls are designed for easy removal and cleaning.
• Battery Care: Follow charging instructions to maintain battery health.

Cleaning Instructions:

• The dustbin, filters, and certain nozzles can be cleaned.
• Rinse parts with clean water. Do not use hot water above 40°C for filters.
• Ensure all parts are completely dry before reassembly.
• Some parts may be dishwasher safe (check specific instructions).

Troubleshooting and Warnings

• Overheating: If the water droplet symbol appears, check for blockages or overheating.
• Reduced Suction: Ensure filters are clean and the dustbin is empty.
• Battery Issues: Refer to charging indicators and ensure the battery is properly connected.
• Do Not: Immerse the appliance in water, use on wet surfaces, or operate without filters.
• Safety Precautions: Keep away from children. Do not use near heat sources.

Product Information

Model numbers and part numbers are provided for accessories and replacement parts.

For purchasing accessories, visit www.shop.aeg.com.