DENVER SW-650 GPS+GLONASS Smart Watch
User Manual
System Requirements
The watch supports Android 4.4, iOS 8.0, Bluetooth 4.0 and above.
How to Charge the Battery
Before starting to use the smart watch, please ensure the battery is charged. For charging, use the provided magnetic charging cable. The recommended power adapter current is 5V, 1A. It takes approximately 3 hours to fully charge the smart watch. Follow these steps to charge:
- Place the charging cable beneath the watch.
- Ensure the POGO pins on the cable fit correctly onto the charging terminals on the back of the watch.
- If correctly placed, the pins will attach to the charging terminals on the back of the watch.
- Connect the charging cable to the power source using the USB connector.
Environment
Please do not wear the smart watch when taking a hot shower or bath. Do not use the watch in very high or low temperature environments, as this may damage the watch.
Basic Operation
- Turn on: Long press the power button for 3 seconds.
- Access sport modes: Swipe from right to left on the watch face, or press the top key.
- Navigate functions in the main menu: Swipe up/down or vice versa on the screen.
- Access the function menu: Swipe from right to left on the screen.
- Confirm selection: Tap the icon on the screen.
- Exit/back: Swipe from left to right on the screen.
- Return to the watch face: Short press the power button on any screen.
- Sport mode shortcut: Press the upper button.
- Check notifications: Swipe from left to right on the watch face.
- Switch submenu/shortcut: Swipe up/down on the screen.
- Turn off: Long press the power button for 3 seconds.
For more accurate measurement, it is recommended to wear the watch approximately 1 cm behind the ulnar styloid joint and close to the skin.
Overview
- Shortcut key for Sport mode/back
- Power button
- Touch screen
- Speaker
- Charging terminals
- Microphone
- Heart rate sensor
Pair the Watch with Smartphone
Mobile phone requirements: Android 4.4 and above; iOS 8.0 and above.
Search and download the "Denver SW-650" app from the App Store or Google Play Store on your smartphone. Ensure your smartphone is set to be "Detectable to all nearby Bluetooth devices".
Step 1: Pairing for Calling Function
- On the Bluetooth settings of your smartphone, activate Bluetooth and turn on the option "Detectable to all nearby Bluetooth devices".
- Enable Bluetooth device searching.
- Select "SW-650" from the list of devices for connection.
- If the connection is successful, "Connected" appears next to the SW-650 device name. The Bluetooth icon on the watch screen changes to blue.
- After the successful initial pairing, the watch will automatically connect with your phone and synchronize date and time. You can also connect the smart watch with your phone via the menu option on the watch.
Step 2: Pairing through the "Denver SW-650" App to Synchronize Data and Notifications etc.
- Pair the watch with your smartphone as described in Step 1.
- Open the "Fundo" app on your smartphone and tap "More" in the bottom right corner.
- Tap "Add device" on the top.
- Select and tap SW-650 to connect.
- If the connection is successful, "Connected" appears next to the SW-650 device name, and the app will synchronize data from the smart watch. The Bluetooth icon on the watch screen shows both blue and green.
Your phone is now connected to the watch. You are free to explore all the functions of the watch in the various interfaces by swiping the touch screen of the watch.
For the full user manual in English, please visit our website and find the product "SW-650" at www.denver-electronics.com.
Environmental and Safety Information
Electric and electronic equipment and included batteries contain materials, components, and substances that can be hazardous to your health and the environment if the waste material is not handled correctly. The crossed-out trash can symbol indicates that this equipment should not be disposed of with household waste. Submit used batteries to the appropriate designated facility for recycling in accordance with legislation.
Declaration of Conformity: Inter Sales A/S declares that the radio equipment type SW-650 complies with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at: http://www.denver-electronics.com/denver-sw-650/
Operating Frequency Range: 158 MHz
Max Output Power: 0.65W
Warning: Lithium battery inside.
DENVER ELECTRONICS A/S
Omega 5A, Soeften
DK-8382 Hinnerup
Denmark
www.facebook.com/denverelectronics