DENVER SW-650 GPS+GLONASS Smart Watch User Manual
System Requirements
The watch supports Android 4.4, iOS 8.0, Bluetooth 4.0 and above.
How to Charge Battery
Before starting to use the smart watch, please ensure the battery is charged. For charging, use the provided magnetic charging cable. The recommended power adapter current is 5V, 1A. It takes approximately 3 hours to fully charge the smart watch. Follow these steps:
- Place the charging cable beneath the watch.
- Ensure the POGO pins on the cable fit correctly onto the charging terminals on the back of the watch.
- If correctly placed, the pins will magnetically attach to the charging terminals on the back of the watch.
- Connect the charging cable to a power source using the USB connector.
Diagram showing the back of the smartwatch with charging terminals and the magnetic charging cable aligning with them.
Environment
Please do not wear the smart watch when taking a hot shower or bath. Avoid using the watch in very high and low temperature environments, as this may damage the watch.
Basic Operation
- Turn on: Long press the power button for 3 seconds.
- Access sport modes: Swipe from right to left on the watch face, or press the top key.
- Navigate functions in the main menu: Swipe up/down or vice versa on the screen.
- Access the function menu: Swipe from right to left on the screen.
- Confirm selection: Tap the icon on the screen.
- Exit/back: Swipe from left to right on the screen.
- Return to the watch face: Short press the power button on any screen.
- Sport mode shortcut: Press the upper button.
- Check notifications: Swipe from left to right on the watch face.
- Switch submenu/shortcut: Swipe up/down on the screen.
- Turn off: Long press the power button for 3 seconds.
- For more accurate measurement, it is recommended to wear the watch around 1 cm behind the ulnar styloid joint, close to the skin.
Overview
Illustration of the DENVER SW-650 smartwatch, showing the front with screen and buttons, and the back with charging terminals, microphone, and heart rate sensor, with numbered labels corresponding to a list of components.
Watch Components:
- Shortcut key for Sport mode/ back
- Power button
- Touch screen
- Speaker
- Charging terminals
- Microphone
- Heart rate sensor
Pair the Watch with Smartphone
Mobile Phone Requirements:
Android 4.4 and above; iOS 8.0 and above.
Search and download the "Denver SW-650" app from the App Store or Google Play Store on your smartphone. Alternatively, scan the provided [QR code for app download] to install the app.
Ensure your smartphone is set to be "Detectable to all nearby Bluetooth devices".
Step 1: Pairing for Calling Function
- On your smartphone's Bluetooth settings, activate Bluetooth and enable the option "Detectable to all nearby Bluetooth devices".
- Enable Bluetooth device searching.
- Select "SW-650" from the list of available devices for connection.
- If the connection is successful, "Connected" will appear next to the SW-650 device name. [Connected status indicator on smartphone Bluetooth settings]
- On the smartwatch's Bluetooth settings, a [checkmark symbol] for Bluetooth connectivity will appear next to your phone's name.
- The Bluetooth icon on the watch screen changes to blue [blue Bluetooth icon].
- After successful initial pairing, the watch will automatically connect with your phone and synchronize date and time. You can also connect the smartwatch with your phone via the menu option on the watch.
Step 2: Pairing through the "Denver SW-650" App
This step is for synchronizing data and notifications.
- Pair the watch with your smartphone as described in Step 1.
- Open the Fundo app on your smartphone and tap "More" in the bottom right corner.
- Tap "Add device" at the top.
- Select and tap "SW-650" to connect.
- If the connection is successful, "Connected" will appear next to the SW-650 device name, and the app will synchronize data from the smartwatch. [Connected status indicator on smartphone app]
- The Bluetooth icon on the watch screen shows both blue and green [blue and green Bluetooth icon].
Your phone is now connected to the watch. You can explore all the watch's functions through its various interfaces by swiping the touch screen. For the full user manual in English, please visit our website and find the product "SW-650" at www.denver-electronics.com.
Environmental and Compliance Information
All rights reserved, Copyright DENVER ELECTRONICS A/S.
DENVER
[CE marking]
Electric and electronic equipment and included batteries contain materials, components, and substances that can be hazardous to your health and the environment if not handled correctly. Electric and electronic equipment and batteries are marked with the [Symbol for separate collection of electrical and electronic equipment]. This symbol signifies that electric and electronic equipment and batteries should not be disposed of with other household waste but should be disposed of separately.
As the end user, it is important to submit your used batteries to the appropriate and designated facility. This ensures that batteries are recycled in accordance with legislation and do not harm the environment.
All cities have established collection points where electric and electronic equipment and batteries can be submitted free of charge at recycling stations and other collection sites, or collected from households. Additional information is available from your city's technical department.
Hereby, Inter Sales A/S declares that the radio equipment type SW-650 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at: http://www.denver-electronics.com/denver-sw-650/
Operating Frequency Range: 158MHz
Max Output Power: 0.65W
Warning: Lithium battery inside.
Contact Information
DENVER ELECTRONICS A/S
Omega 5A, Soeften
DK-8382 Hinnerup
Denmark
Denver A/S
