Beok TGT70 WIFI Thermostat

Product Summary

The Beok TGT70 WIFI touch screen thermostat offers phone-controlled temperature management for industrial, commercial, and domestic environments. It is designed to control heating appliances, with a particular focus on floor heating systems. The thermostat is compatible with both iOS and Android operating systems.

Technical Parameters

Model Specification

Wiring Diagram

The wiring diagram illustrates connections for different models (TGT70WIFI-EP, TGT70WIFI-WP, TGT70WIFI-WPB). It shows connections for power (L and N to 220 voltage power), and specific terminals for gas boilers or thermal actuators. For example, terminals 1 and 2 are for thermal actuators, and terminals 5 and 6 are for a gas boiler. It is crucial to connect the wires correctly as per the diagram to avoid short circuits, which could damage the gas boiler control board.

TGT70WIFI-EP: Connections shown for terminals 1, 2, 3, 4.

TGT70WIFI-WP: Connections shown for terminals 1, 2, 3, 4.

TGT70WIFI-WPB: Connections shown for terminals 1, 2, 3, 4.

Note: Please connect L and N to 220 voltage power, and terminals 5 and 6 to your gas boiler. Terminals 1 and 2 are for thermal actuators; do not connect them to your gas boiler.

Main Button Instruction

• Mode Button: Switches between manual mode and program mode.
• Time set: Used for hour, minute, and week setting.
• ⬆️ Up button: Increases temperature.
• ⬇️ Down button: Reduces temperature.

User Interface Explanation (Device)

The device interface displays the following information and controls:

• ? WIFI: Indicates Wi-Fi connection status.
• Period: Shows the current time period (e.g., 1, 2, 3, 4, 5, 6).
• Set temp.: Displays the target temperature.
• Room temp.: Displays the current ambient temperature.
• Week: Shows the current day of the week (e.g., 1234567 for 7 days).
• ⏰ Clock: Displays the current time.
• ? Power on/off: Control for turning the device on or off.
• ⬆️ / ⬇️ Buttons: Used for temperature adjustment and navigation.
• ? Child lock: Icon indicating child lock status.

User Interface Explanation (Phone App)

The phone application interface provides control over the thermostat:

• TEMP SET TO: Displays the target temperature.
• Time and Day: Shows current time and day (e.g., 15:47 Monday).
• Temperature Display: Shows current room temperature.
• Navigation icons for Menu, Settings, etc.

Thermostat Operation Instruction

1. Setting Power on/off: Press ? to turn the power on or off.
2. Setting Temperature: Press ⬆️ to set the desired temperature.
3. Setting the Clock: Press ⏰ to set the minute, hour, and week. Press ⬆️ for adjustment.
4. Setting the Manual Mode:
   • Manual mode is non-programmable. Press [mode-button] to enter manual mode (indicated on screen).
   • Press ⬆️ to set the temperature.
   • Press ⏰ to set minute, hour, and week.
5. Setting the Child Lock: Long press ? to enter child lock mode (? icon appears). Long press again to disable.
6. Setting the Programmable Mode:
   • Long press [program-button] to enter programmable mode. "LOOP" and day indicators (e.g., 12345) will display.
   • Press ⬆️ to select the control way: 5+2 (12345), 6+1 (123456), or 7 days (1234567) programmable.
   • Press [period-icon] to select the periods.
   • Press ⬆️ to change the temperature for the selected period.
   • Press ⏰ to adjust the time for the selected period.
   • Press again to select the weekend's temperature.
   • For temporary adjustment in any period, press ?; the display will flash. Settings confirm automatically upon completion.

Operation Schedule (Period Switch)

Press to switch operation between manual mode and programmable mode.

Remark: The defaulted temperature of period 3 and period 4 is the same as period 2. Please change it according to your request.

Advanced Setting

In the state of power-off, long press ⚙️ and then press ⬆️ to enter advanced setting mode. Press ⬆️ / ⬇️ to set relative items.

For OPT: When the thermostat connects with a gas boiler, the terminal short circuit is extinguished, and the open circuit is ignition. Then turn to the reverse output '01'. When OPT is adjusted to 00, the thermostat can also be used in the water floor heating system. If the water temperature is too low, it will prohibit output (relay output 3A/200W). This function is only suitable for WIFI linkage function thermostats.

DFI Explanation: For example, if Room temp is 22°C, Hysteresis 'DFI' = 1°C. When room temp rises to 23°C, the relay stops outputting. When room temp drops to 21°C, the relay outputs again and starts heating. DFI is hysteresis for room temp; factory set is 1°C. If this is too large, it can be adjusted to 0.5°C.

Attention to Phone WiFi Connection

For Android System: Login in Google Play, search "Beok Home", you can download it on your phone. Or scan below code to download:

[QR Code Placeholder for Android Download]

For iOS System: Login in App Store, search "Beok Home", you can download it on your iPhone. Or scan below code to download:

[QR Code Placeholder for iOS Download]

1. Install APP on phone

2. Connection Thermostat with Phone

During the configuration process, the ? icon flashes briefly to start the configuration network. This is valid for 2 minutes. At this time, the Wi-Fi symbol will be twinkling quickly and frequently. It means you can connect the thermostat with your phone now. When the Wi-Fi symbol stops twinkling, it means the thermostat is successfully connected with the phone.

Connection with Phone: Open "Beok Home" APP on your phone, you can see the APP welcome page.

After connection success, you need press "Search" key.

APP Interface on the Phone: The app displays controls for Thermostat Name, Return, Refresh, Set Temperature, Current Temperature, Room Temperature, Set Temperature Adjustment (up/down), Time Matching, Period Display, Power Switch, Heating State, Screen Locking, Anti-freezing, and Manual/Auto mode.

Thermostat Setting through Phone Operation:

1. Clock: Press Time Matching to synchronize your phone clock with the thermostat clock.
2. Children lock (screen locking): Press ? to lock the thermostat.
3. Anti-Freezing: Press [anti-freeze-icon] to activate. The thermostat will show on the screen, indicating the anti-freezing function is active.
4. Temperature setting: You can directly drag the pointer on the Temperature Setting Dial to set the temperature, or press ⬆️ / ⬇️ to set the temperature step by step.
5. Period setting: Long press Period Display to enter the Period Setting mode. You can choose the week program mode: 5+2, 6+1, or 7 days. Touch each time value to set the time for the period. Touch each temperature value to set the temperature for the period. Note: When you choose the 7-day program mode, the Weekend Program data set will not appear.
6. Advanced Setting: Long press ⚙️ to enter the Advanced Setting mode.
7. Switch of Manual mode and Auto mode: Press [mode-button] to switch between manual mode or auto mode.
8. Power off: Press ? to turn the thermostat on or off.

Attention to Phone WiFi Connection:

1. After you press Configure, if connection fails:

• Please confirm your mobile phone is set to WLAN mode and its mobile data (3G/4G) is turned off. Please connect to a 2.4GHz Wi-Fi network, not 5GHz Wi-Fi.
• Please add your Wi-Fi router name; we recommend it does not include spaces or Chinese symbols.
• Please check your Wi-Fi router password. We recommend it not exceed 32 characters, with no spaces, blank passwords, or special symbols except letters and numbers.
• AP config: For AP thermostat hotspot configuration (operate FAC=12 in advanced settings).
• Please confirm the Wi-Fi password is correctly filled. We recommend you check the password to be visible when it is input.

2. If it displays the following reminder, please go to Advanced Setting to reset the corresponding setting:

[Image/Diagram Description: A screenshot showing a reminder message about room temperature being higher than the set maximum, prompting a reset in advanced data settings.]

[Image/Diagram Description: Another reminder message about room temperature being lower than the set minimum, also prompting a reset in advanced data settings.]

Installation Instruction

This product is suitable for a standard 80*80mm wall box and a 60 mm European round box.

Steps:

1. Open the main control board as shown in the figure. Press the power part of the thermostat, gently lift it up, and separate it from the mounting board hook.
2. Connect the wires correctly according to the wiring diagram and secure the rear cover to the mounting plate with M4 screws.
3. Connect the lower cover cable to the upper cover.
4. Insert the back into the four hooks of the mounting plate. Gently press down on the thermostat to lock the front housing and complete installation.

NOTICE: The installation wire should be 1.5-2.5mm².

[Warning Icon] Warning: The symbol [CE Mark] means the unit is being installed. It may cause electrical shock hazard during maintenance, so please make sure it is operated by a professional technical worker.

In the Box

Our Service

Beok Controls offers a warranty of 24 months from the sales date. During the warranty period, if the issue is related to quality, Beok will fix or replace the product free of charge after testing. For issues not related to quality or outside the warranty period, a charge will apply for after-sales service.

[QC Icon] Quality Control:

Inspector: 01

[PASS Icon] PASS

Production Date: YEAR 20, MONTH 10

[CE Mark]