Aocktobar Money Counter Operation Instructions

Introduction

This document provides operation instructions for the Aocktobar Money Counter.

The main unit features a control panel with buttons for various functions and an LCD display. A separate display unit is also included.

Control Panel Buttons: A/M (Auto/Manual), UV, MG, IR, DD, MT, COUNT, SORT, ADD, CHECK, NEW, OLD, VALUE, BATCH, CUR (Currency), FUNC (Function), START.

Display Indicators: Currency (e.g., USD, EUR, AUTO), Modes (UV, MG, IR, DD), Count, Total Value, Batch Count.

1. Counting the Number of Banknotes

This section describes how to calculate the number of banknotes.

Press the CUR key to change the currency used in the bill inspection.

2. Select Currency

A reminder marker is shown for dollar bill inspection.

Press the FUNC button to change the method for checking banknote authenticity (MG/UV/IR).

3. Automatic and Manual Modes

An icon of UV/IR pattern is displayed for detecting counterfeit banknotes.

Press the A/M button to switch between Auto mode and Manual mode.

4. Currency Denomination Setting

1) Icon for manual mode is displayed.

Press the VALUE button to set the face value of the bill to be checked.

2) Press VALUE again to change the face value of the banknote to be examined. The display shows "TOTAL: 100 VALUE".

3) The display shows "TOTAL: 50 VALUE", indicating the face value of the banknote.

5. Cumulative Counting Function

1) The ADD icon appears on the screen. Press the ADD button. The display shows "TOTAL: 50 VALUE" and a count of 0.

2) This value will be added up after counting the money. Press the ADD key again; the ADD icon disappears. The display shows "TOTAL: 50 VALUE" and a count of 133.

6. Detection Mode of Mutilated Currency

1) The DD icon appears on the screen. DD signifies the function of detecting residual banknotes. Press the DD button. The display shows "TOTAL: 100 VALUE" and a count of 0.

2) After pressing the DD key again, the DD icon disappears.

7. "BATCH" Function

1) After pressing the FUNC button several times, the display returns to the main interface.

2) Press the BATCH button.

3) Press the BATCH button once more. The display shows "BATCH: 100", indicating 100 sheets for one batch.

4) Press the ADD+ button once. The display shows "BATCH: 50", indicating a batch of 50 sheets.

5) The display shows "BATCH: 51", indicating a batch of 51 sheets.

6) Press the DD- button three times.

7) The display shows "BATCH: 48", indicating a batch of 48 sheets.

Customer Support

For any product problems, customers can contact Aocktobar by email. The Aocktobar customer service team will respond within 24 hours and provide the best service.