ZX-895 Ultrasonic Cleaner Operation Guide
Product Overview
The ZX-895 is an ultrasonic cleaner designed for efficient and thorough cleaning of various items such as jewelry, glasses, dentures, and watches. It features a digital timer and a degassing function for optimal cleaning performance.
Operating Instructions
Water Level: Ensure the water volume is close to the highest water level mark inside the tank but does not exceed it.
Preset Cleaning Cycles: The cleaner offers 5 preset cleaning cycles: 90s, 180s, 280s, 380s, and 480s. Upon powering on, the default setting is 90 seconds.
Setting Cleaning Time: Briefly press the TIME ON/OFF button to cycle through the available cleaning time periods (90S, 180S, 280S, 380S, 480S).
Starting Cleaning:
- Press the CLEAN button to start the ultrasonic cleaning process. The countdown timer will display the remaining cleaning time.
- Press the DEGAS button to activate the degassing cycle. This cycle works for 2 seconds and pauses for 1 second, helping to separate oxygen produced during cleaning and protect items from oxidation. The cleaner will continue this cycle until the set cleaning time is complete.
Observation: During the cleaning state, you will observe ripples on the surface of the water.
Turning On/Off: Press and hold the TIME ON/OFF button for 2 seconds to turn the ultrasonic cleaner on or off.
Post-Cleaning Care
Draining: Carefully pour out the used water after cleaning.
Drying: Dry the cleaned items with a dry cloth.
Polishing: For enhanced shine, polish the items with a polishing cloth.
