User Guide for iGage models including: iG10 Firmware Update, iG10, Firmware Update, Update
iG10 Firmware Update 1 iGage iG10 User Manual iG10 Web Interface The iG10 web interface allows detailed configuration of the receiver. The iG10 receiver has an internal Wi-Fi Access Point which can be used in conjunction with a PC or smartphone to configure and control every feature of the receiver including firmware updates. This manual section describes how to connect to the head by Wi-Fi, the screens match desktop browsers. A mobile (cell phone) browser may be different. Connecting a computer Connect a computer to the iG10 receiver using Wi-Fi. Device Wi-Fi overview: SSID: Sxxxxxxxxxxxx Wi-Fi Key: (open) open address: 192.168.10.1 port: 80 User Name: admin password: password device-serial-number no password is needed, connection is lower case lower case To connect the iG10 to your PC with Wi-Fi, on the PC system tray click on the network icon (1) then click on the Wi-Fi list button (2): Click on the Network icon in the System Tray 2 iGage iG10 User Manual Find the iG10 receiver: Click on Connect. Wait a moment for the connection to be completed. If a dialog noting there is no internet available from the connection, choose to `stay connected'. Open a browser window and browse to the IP address: 192.168.10.1: Enter `admin' for the User and `password' for the Password, then click Login iGage iG10 User Manual 3 The main interface `Dashboard' window will be shown: Click on Management on the left panel. Click on Choose File, browse to one of the three firmware files, select it and click Submit. The Preferred order is: Mainboard (a reboot and reconnect will required after update) OEM Radio 4 iGage iG10 User ManualMicrosoft Word for Microsoft 365