iGage supplies GNSS receivers, surveying equipment and field software, with manuals and technical guidance for land surveying, mapping and precise positioning.
iGage Mapping Corporation supplies GNSS receivers, surveying equipment and field software for surveying, mapping and precise positioning.
Browse manuals and guides for receiver setup, firmware updates and CHCNAV LandStar 8 installation, licensing and survey workflows. Match the guide to your equipment model and software version before making changes.
iGage supports equipment and software purchased from the company. For products purchased elsewhere, contact your supplier.
Selected manuals from manuals+ curated for this brand.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
Browse this category for LandStar 8 guides. iGage also lists its 2025 printed user manual at https://igage.com/LS8/LS820225UM.htm. Check that the edition matches your software.
Call +1-801-412-0011. For LandStar questions, email landstar@igage.com. iGage states that it supports only equipment and software it sells; contact your supplier for products purchased elsewhere.
The iGage-verified release is available at https://igage.com/out/LandStarDistribution/LatestVersion/index.htm. Follow the installation guide and update the appropriate localization package after installation.
Purchase a registration code from an authorized dealer, then open Activate software/About and the License tab in LandStar. Enter the code or scan the supplied QR code and follow the activation prompts. A license can be active on only one device at a time.
Use the guide for your exact receiver model and the correct firmware files. Wi-Fi addresses and update procedures differ between models. Follow the specified charging requirements and reconnect after a reboot when instructed.
