Installation Bluebot App

Step 1: Charge Robot

Place the robot on the charging station to charge and make sure it's fully charged before use.

Step 2: Remove from Station

Remove the robot from the charging station.

Step 3: Power On Robot

Make sure the robot is on, by holding in the "On button" [▶️ power] for a few seconds on top of the robot. Wait until the robot has started fully.

Step 4: Download Bluebot App

Download the Bluebot app. The app can be found in the App Store and Google Play.

Available for Android™ 4.1 or later and iOS 9.0 or later.

Step 5: Register Account

Register a new account if you are not yet an existing user.

Step 6: Add Device

Open the Bluebot app and press the "+ " icon [➕] to add your device.

Step 7: Select Bluebot C1

Select the Bluebot C1.

Step 8: Connect to Wi-Fi

Select your 2.4Ghz wifi network, enter the password and press confirm. Note: a 2.4 Ghz connection only will work.

Step 9: Reset Device (Power Cycle)

Reset the device: Power on the device. Power off after 10s and then power on again. After done, press "Next" [➡️ Next] to continue.

Step 10: Reset Device (Buttons)

Reset the device: Hold the Power and Recharge button for 3s. After done, press "Next" [➡️ Next] to continue.

Step 11: Confirm Indicator

Reset the device: Click: "Confirm the indicator is blinking rapidly.", then press "Next" [➡️ Next] to continue.

Step 12: Connection Complete

Your robot is connecting to the Bluebot app, please wait till connection is complete.