Samsung Washing Machine Exploded Views and Parts List
2. Main
Exploded View of Main Components:
The main assembly includes the outer casing, drum, and various internal components. Key parts are numbered for identification.
- Part 1: Outer casing
- Part 2: Drum assembly
- Part 3: Top cover
- Part 4: Base frame
- Part 5: Front panel
- Part 6: Motor assembly
- Part 7: Water inlet valve assembly
- Part 10: Hoses and connectors (10-1 to 10-5)
3. Assy Frame & Electrical Parts
Exploded View of Assembly Frame and Electrical Parts:
This section details the structural frame of the washing machine and its associated electrical components, including wiring harnesses and control modules.
- Part 1: Main frame structure
- Part 2: Control board housing
- Part 3: Wiring harness
- Part 4: Power cord
- Part 5: Door lock mechanism
- Part 6: Water level sensor
- Part 7: Drain pump
- Part 8: Vibration dampeners
- Part 9: Internal wiring
- Part 10: Electrical connectors and terminals (10-1 to 10-7)
- Part 11: Display panel assembly
- Part 12: Door switch
- Part 13: Heating element
- Part 14: Pressure sensor
- Part 15: Terminal block
- Part 16: Electronic control unit (ECU) components (16-1 to 16-6)
- Part 17: Internal sensors
4. Assy Tub & Drum
Exploded View of Tub and Drum Assembly:
This view illustrates the washing machine's tub and drum, including the inner drum, outer tub, and related mounting and sealing components.
- Part 1: Outer tub
- Part 2: Inner drum (stainless steel)
- Part 3: Drum spider/support
- Part 4: Bearings and seals
- Part 5: Tub seal
- Part 6: Tub mounting bolts
- Part 7: Water outlet pipe
- Part 8: Drum baffles
- Part 9: Tub cover
- Part 10: Water level sensor connection
- Part 11: Tub components and fasteners (11-1 to 11-7)
5. Assy Front Parts
Exploded View of Front Assembly Parts:
This section covers the components located at the front of the washing machine, including the door, detergent dispenser, and related trim.
- Part 1: Door assembly
- Part 2: Detergent dispenser drawer
- Part 3: Door seal/gasket
- Part 4: Front panel components (4-1 to 4-4)
- Part 5: Door handle and latch assembly (5-1 to 5-1-3)
6. Assy Panel Control
Exploded View of Control Panel Assembly:
Details the washing machine's control panel, including buttons, knobs, display, and internal circuitry.
- Part 1: Main control panel housing
- Part 2: User interface board
- Part 3: Display screen
- Part 4: Control knobs and buttons
- Part 5: Front decorative panel (5-1, 5-2)
7. Assy Drawer
Exploded View of Drawer Assembly:
Illustrates the detergent drawer assembly, including the drawer itself and its internal compartments and mechanisms.
- Part 1: Drawer housing
- Part 2: Detergent compartments
- Part 3: Drawer slide mechanism (3-1 to 3-4)
- Part 4: Water feed tubes (4-1 to 4-4)
- Part 5: Drawer handle
8. Assy Housing Drawer-Module
Exploded View of Housing Drawer-Module Assembly:
This section shows the housing and module associated with the detergent drawer, including water supply and drainage connections.
- Part 1: Drawer housing module
- Part 2: Water inlet connection
- Part 3: Solenoid valve
- Part 4: Water supply tubes
- Part 5: Drainage connection
- Part 6: Mounting brackets
- Part 7: Fasteners
- Part 8: Water flow sensor
- Part 9: Housing components (9-1)
- Part 10: Module casing
- Part 11: Internal tubing
9. Small Parts
Exploded View of Small Parts:
A collection of various small components and fasteners used throughout the washing machine assembly.
- Part 1: Clip
- Part 2: Screw
- Part 3: Washer
- Part 4: Nut
- Part 5: Spring
- Part 6: Cable tie
- Part 7: Grommet
- Part 8: Bushing
- Part 9: Seal ring
- Part 10: O-ring
- Part 11: Small bracket
