Samsung WA13F5S2UWW/FA Washing Machine Parts
1. Main Body Exploded View
This section provides an exploded view of the main body of the Samsung WA13F5S2UWW/FA washing machine. It illustrates the primary components and their assembly.
Key components shown include:
- Part 1: Main body casing (front view)
- Part 2: Main body casing (side view)
- Part 3: Control panel area
- Part 4: Base of the washing machine
- Part 5: Internal drum support structure
- Part 6: Fasteners for the drum support
- Part 0: A smaller, inset view of the top of the machine.
2. Assy Cover Top Exploded View
This section details the exploded view of the top cover assembly for the washing machine.
Key components include:
- Part 1: The main top cover panel.
- Sub-parts of Part 1 (1-1 to 1-6) show various elements of the cover, including hinges, seals, and structural supports.
- Part 2: The control panel interface, with sub-parts (2-1 to 2-3) illustrating buttons, displays, and surrounding bezels.
- Further sub-assemblies (1-4, 1-5, 1-6) show detailed breakdowns of specific sections of the cover and control panel area, including wiring harnesses and small electronic components.
3. Assy Tub Parts Exploded View
This section presents an exploded view of the washing machine's tub assembly and related internal parts.
Key components shown:
- Part 1: The outer tub structure. Sub-parts (1-1 to 1-16) detail various fittings, seals, and mounting points for the tub.
- Part 2: The inner drum or wash basket. Sub-parts (2-1 to 2-6) illustrate the drum's structure, including the perforated base and any internal baffles or supports.
- Part 3: The motor and drive system components, including the motor itself, drive pulley, and associated mounting hardware.
- Part 4: The water pump and drainage system components.
4. Assy Frame & Case Exploded View
This section provides an exploded view of the washing machine's frame and outer case assembly.
Key components include:
- Part 1: The main chassis or frame of the washing machine. Sub-parts (1-1 to 1-8) show various structural elements, brackets, and mounting points.
- Part 2: The rear panel or access cover.
- Part 3: Water inlet hoses and related fittings.
- Part 4: Drain hose and its connection points.
- Part 5 & 6: Electrical connectors or power cords.
- Part 0: An inset view of the top of the machine, similar to the first section.
5. Small Parts Exploded View
This section illustrates various small parts used in the assembly of the washing machine.
The parts are numbered 1 through 9 and include items such as:
- Part 1: A type of clip or fastener.
- Part 2: A circular component, possibly a seal or grommet.
- Part 3: A spring or tensioning element.
- Part 4: A small electrical component or housing.
- Part 5: A thin rod or wire.
- Part 6: A bracket or clamp.
- Part 7: Another type of clip or fastener.
- Part 8: A thin rod or wire, similar to Part 5.
- Part 9: A circular component, possibly a cap or bushing.
