Drives and drive systems from DewertOkin - DewertOkin
This document provides essential installation and mounting instructions for the DewertOkin OKIMAT 4 series of electric drives, including models IPS, IPSe, EPS, and EPSe. These drives are designed for electromotoric adjustable slatted frames (Lattenrost / Sommier).
Ensure motors are in the correct installation position by connecting the power plug and using the handset's down buttons. For safety, disconnect the power plug after positioning. Mount the OKIMAT by placing the slatted frame upside down, removing side covers, and firmly pushing the OKIMAT onto the levers until it snaps into place. Ensure the back symbol points towards the head section. Reattach side covers, connect the handset cable through the strain relief, place the frame in the bed, and plug in the power connector.
The OKIMAT series offers optional features like a mains isolation circuit for protection against electromagnetic fields and a reset function for power failures using a 9V battery. Adhere to the maximum of 5 switching cycles per minute. Avoid continuous operation for more than 2 minutes to prevent damage. Only authorized personnel should open the OKIMAT, and the power must be disconnected before doing so. The manufacturer is not liable for damages from unauthorized repairs or modifications.
The drives operate on mains connections of 100-240V AC, 50/60 Hz, with a 24V DC internal voltage. They are designed for intermittent duty (15% at 2 min. max. continuous operation) and are manufactured to VDE protection class II. Power consumption varies between 30-300 Watts depending on load and type.
If motors do not operate, check mains connection and handset plug. For models with mains isolation and auxiliary movement, press the green button on the plug. If motors still don't work after a power failure reset, renew the battery. Regular maintenance is not required, but cleaning should be done with a dry cloth. Dispose of packaging and old components responsibly.
For complete commissioning and detailed information, refer to the specific mounting instructions provided by DewertOkin.
File Info : application/pdf, 63 Pages, 4.60MB
DocumentDocument |
DewertOkin OKIMAT 4 Series Installation Manual Installation manual for DewertOkin OKIMAT 4 series electric bed actuators (IPS, IPSe, EPS, EPSe), detailing mounting, safety, technical specifications, and troubleshooting for adjustable bed systems. |
 |
OKIMAT 6 & OKIMAT 6B Installation Instructions Detailed installation instructions for the OKIMAT 6 and OKIMAT 6B drives from DewertOkin, covering safety, components, electrical connections, and troubleshooting. |
 |
DewertOkin EU Declaration of Conformity for Actuators, Handsets, and Control Systems Official EU Declaration of Conformity from DewertOkin Kft. detailing compliance with Electromagnetic Compatibility, Low Voltage, and RoHS directives for their range of actuators, handsets, control units, and accessories. |
 |
RF ECO BT System Quick Guide - DewertOkin A quick guide to setting up and using the RF ECO BT system, including connections, functions, and technical specifications for DewertOkin products like the OKIMAT 4, RF-TOPLINE, and RF ECO. |
 |
MCL III Control Unit Installation Instructions | DewertOkin Official installation instructions for the DewertOkin MCL III Control Unit. Covers safety, technical specifications, installation, operation, maintenance, and troubleshooting for this component used in drive systems, particularly in medical applications. |
 |
RF48 Remote Control User Manual - DewertOkin User manual for the DewertOkin RF48 remote control, detailing its functions, modes, and operation for adjustable beds, including massage and special position controls. |
 |
DewertOkin Control Unit CU458-2 Installation Instructions Comprehensive installation instructions for the DewertOkin Control Unit CU458-2, covering safety, components, technical specifications, installation procedures, and troubleshooting. |
 |
RF6721 Remote Control User Instructions User manual for the RF6721 remote control, detailing button functions, pairing procedures, and regulatory compliance information for adjustable beds. |