Victrola Wave Instruction Manual
Product Overview
Victrola Wave Turntable (Model VPT-1520)
Overview Diagram
Top View Components:
Speed Selector: Adjusts playback speed.
45 RPM Adaptor: For playing 7-inch records.
Counter Weight: Balances the tonearm.
Anti-Skate Knob: Prevents the stylus from skipping across the record.
Tonearm Lift Lever: Manually raises and lowers the tonearm.
Tonearm Holder: Secures the tonearm when not in use.
Tonearm: Holds the cartridge and stylus.
Removable Headshell: Holds the cartridge and can be detached.
Cartridge: Contains the stylus (needle) and converts record vibrations into electrical signals.
Platter: The rotating disc that holds the record.
Slipmat: A protective mat placed on the platter.
Control Button: Multifunction button for power and mode switching.
Back View Components:
Dust Cover: Protects the turntable from dust.
RCA Output with Ground: Connects to amplifiers or powered speakers.
Pre-Amp Switch: Selects between Phono and Line output.
AC Power Port: Connects the power cord.
Auto-Stop Switch: Controls automatic stopping of the platter.
What's Included
- Turntable
- Dust Cover
- Power Cord
- RCA Cable
- 45 RPM Adaptor
- Counter Weight
- Removable Headshell
- Platter
- Silicone Slipmat
Cartridge Downforce Guide
Align the front of the counterweight to the indicated counterweight alignment line.
| Cartridge | Recommended Downforce | Counterweight Alignment |
|---|---|---|
| Audio Technica AT-VM95 Series (AT-VM95E Included) | 1.8-2.2g | Back Line |
| Ortofon OM Series | 1.5-2.0g | Front Line |
| Ortofon 2M Series | 1.6-2.0g | Requires Downforce Scale |
Specifications
General
Power Input: AC 100-240V ~ 50Hz/60Hz
Bluetooth Version / Profile / Frequency: Bluetooth V5.4 / A2DP, AVRCP 2.402GHz-2.480GHz
Supported Bluetooth Codecs: Qualcomm® aptX™ Adaptive, aptX™ HD, aptX™, SBC, LC3 (Auracast)
Outputs: RCA (Built-in pre-amp) 200-280 MV (5 CM/SEC AT 1 KHZ-10DB) PHONO, 2.5MV±3DB (5 CM/SEC AT 1 KHZ-10DB)
Dimensions: W 16.93" x L 14.84" x H 4.72” (W 430mm x L 377mm x H 120mm)
Weight: 5.90 kgs / 13 lbs (w/ cover)
Accessories Included: Dust Cover, 45 RPM Adapter, 6' RCA cable
Turntable
Drive Method: Belt-drive
Platter: Die-cast aluminum
Cartridge: Audio Technica VM95E
Motor: DC Servo-Controlled
Speeds: 33-1/3 RPM & 45 RPM
Phono Pre-Amp Gain: 35 dB Nominal, RIAA Equalized
Signal-to-Noise: >45 dB
Wow & Flutter: <0.175
Tonearm Length: 225mm
Overhang: 18.50mm
Tracking Error Angle: <2 Degrees
Operation
Function Button
Press and Hold: Power On/Off
Single Press: Switch between Bluetooth® (blue LED) and RCA (white LED) output
Double Press: In Bluetooth® mode - Enable Auracast™ broadcast (light blue LED)
Auto-Stop Switch
ON: Platter will begin spinning when tonearm hovers over the edge of the record and stop spinning at the end of the record to prevent stylus wear.
OFF: Platter will spin when speed control is set to 33 or 45, regardless of tonearm position.
Pre-Amp Switch
LINE: Set the switch to line if connecting to line line-level input on speakers or amplifier.
PHONO: Set the switch to phono if using external pre-amp or amplifier with phono input.
Additional Notes
- Unit automatically powers off if no playback for 15 minutes.
- Wired RCA output is disabled when mode is set to Bluetooth Out.
- Unit automatically starts Bluetooth pairing when entering Bluetooth Out mode.
- To reset the unit, press and hold the function button (5 seconds). This will remove and forget all previously paired Bluetooth devices.
Warnings and Safety Information
Important Safety Instructions
- Read and keep these instructions for future reference.
- Heed all warnings on the appliance and in the instructions.
- Follow all operating and use instructions.
- Do not use near water or moisture.
- Clean only with a dry cloth.
- Do not block ventilation openings.
- Do not install near heat sources.
- Protect the power cord from damage.
- Use only manufacturer-specified attachments/accessories.
- Use caution with carts/stands to avoid tip-over.
- Unplug during lightning storms or long periods of non-use.
- Refer servicing to qualified personnel.
- CAUTION/ATTENTION: RISK OF ELECTRIC SHOCK. DO NOT OPEN. / ATTENTION RISQUE DE CHOC ÉLECTRIQUE. NE PAS OUVRIR.
- The lightning flash with arrowhead symbol indicates the presence of non-insulated “dangerous voltage” within the product’s enclosure. [high-voltage symbol]
- Warning: To reduce the risk of electric shock, do not remove the cover. Refer servicing to qualified personnel.
- The exclamation point within an equilateral triangle alerts the user to important operating and maintenance instructions. [warning symbol]
- This equipment is Class II or double insulated and does not require an earth safety connection.
- The mains plug is the disconnect device and must remain operable.
- WARNING: Do not expose to rain or moisture. Do not place liquid-filled objects on the apparatus.
- Use in moderate climate.
- Refer to exterior bottom/back enclosure for electrical and safety information.
- Do not impede ventilation with items like newspaper or curtains.
- Do not place naked flame sources, like candles, on the apparatus.
- Do not install in confined spaces.
Safety Information
Shutting Off Power: Unplug the power cord from the wall outlet when not in use for extended periods.
Controls and Adjustments: Using procedures other than specified may result in hazardous radiation exposure.
Preventing Electric Shock: Match the wide blade of the plug to the wide slot and insert fully.
Product Issues: If problems occur, contact qualified service centers. Do not use in defective states.
Before Use:
- Choose installation location carefully: avoid direct sunlight, heat sources, vibrations, excessive dust, cold, or moisture. Keep away from humming sources like transformers.
- Do not open the cabinet to avoid damage or electric shock. Contact Customer Service if foreign objects enter.
- Handle records with clean fingers. Do not play cracked records.
- Pull the plug directly, not the cord, when unplugging.
- Use the white protective needle cover after use to protect the stylus.
- Clean the unit with a clean, dry cloth. Avoid chemical solvents.
- Keep this manual in a safe place.
FCC & IC Warnings
FCC Statements: Changes or modifications not expressly approved by the responsible party for compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules and Innovation, Science and Economic Development Canada's license-exempt RSS standard(s). Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Interference Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by:
- Reorienting or relocating the receiving antenna.
- Increasing the separation between the equipment and receiver.
- Connecting the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consulting the dealer or an experienced radio/TV technician for help.
FCC & IC Radiation Exposure Statement
This equipment complies with FCC and Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
French Translation of Radiation Statement: Cet équipement est conforme aux limites d'exposition aux radiations définies par le Canada pour des environnements non contrôlés. Cet équipement doit être installé et utilisé à une distance minimum de 20cm entre l'antenne et votre corps. Cet émetteur ne doit pas être installé au même endroit ni utilisé avec une autre antenne ou un autre émetteur.
Limited Warranty and Customer Support
Limited Warranty
Victrola is a registered trademark of Innovative Technology Electronics, LLC.
United States:
For detailed information about warranty policy and limitations, visit victrola.com/pages/warranty.
Outside the U.S., Canada, and US Territories:
The warranty complies with applicable law when sold to consumers outside the United States, Canada, and US Territories. For warranty service, contact the dealer or distributor from which the product was purchased, with your original receipt.
Canada and US Territories:
The warranty complies with applicable law when sold to consumers in Canada or a US Territory. For warranty service, contact the dealer or distributor from which the product was purchased, with your original receipt.
If assistance from the dealer is not possible, contact customer service at victrola.com/contact.
Customer Support
Website: VICTROLA.COM/PAGES/CUSTOMER-CARE
Email: support@victrola.com
Phone: (877)483-2497
Notes on Product Changes and Trademarks
As a result of continual improvements, the design and specifications of this product are subject to change without notice.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. The Auracast™ word mark and logos are trademarks owned by Bluetooth SIG. Use of these marks by Innovative Technology Electronics, LLC is under license.
Other trademarks and trade names belong to their respective owners.
Made in China.
This product has been manufactured and sold under the responsibility of Innovative Technology Electronics, LLC. Victrola is a trademark used under license by Innovative Technology Electronics, LLC.
