Grove - NFC Tag
SKU: 101020070
Availability: 3 Available
Description
The Grove - NFC Tag is a highly integrated Near Field Communication Tag module. This module utilizes an I2C interface and is based on the M24LR64E-R chip, which features a 64-bit unique identifier and 64-Kbit EEPROM. The Grove - NFC Tag is equipped with an independent PCB antenna that can be easily extended outside of any enclosure, providing greater flexibility for project design.
Specifications
- Working Voltage: 5V or 3.3V
- Working Current: <1mA
- Max effective range: 2cm
- Supports contactless communication at 13.56MHz
- Compliant with ISO 15693 and ISO 18000-3 mode 1 standards
- Features a 64-bit unique identifier (UID)
- Supports Read Block & Write (32-bit blocks)
- Grove I2C Interface
Documents
For more information, please visit the wiki page. Contributions to improve documentation, demo code, or tutorials are welcome. For technical support, please post questions on the forum.
Best-sellers
- Grove - NFC Tag
- Grove - Base Shield V2
- Grove - Moisture Sensor
- Grove - Starter Kit for Arduino
Technical Details
| Dimensions | Weight | Battery |
|---|---|---|
| 30mm x 90mm x 10.5mm | 12g | Exclude |
Questions and Answers
Have a question about this? Ask people who own it.
0 questions found.
A user asked: "where I can find ID (64-bit unique identifier (UID))??" on Oct 19, 2016.
Popular Searches
PCB Manufacturing, FPGA, PCB Stencil, Arduino XBee, Arduino Shield, LinkIt ONE, Crazyflie 2.0, Raspberry Pi 3 Model B, RF Explorer, Beaglebone Black, DSO Nano v3, Raspberry Pi, MediaTek X20, Raspberry Pi Touchscreen, HiKey Board, rplidar, Linkit, Cubieboard, Beaglebone Cape, raspberry pi relay, RPLIDAR A2
