Multifunctional Camping Lantern SL10 User Manual

Thank you for purchasing the Raddy SL10 Multifunctional Camping Lantern. This manual provides detailed instructions for safe operation and optimal use of all features. Please read the safety rules carefully before using the product and keep this manual for future reference.

Safety Rules ⚠️

To prevent hazards or damage to the user and to people or objects in the vicinity, this manual sets out the matters that you are expected to observe. To use the product safely, please fully understand the relevant contents.

Caution: Ignoring the following content may result in damage to people or objects.

• In case of thunder when using outdoors, please fold the antenna and evacuate to a safe place.
• Do not use it in an unstable place or condition.
• Do not use, install, or store the antenna near a fire, such as a fireplace.
• Please use the configured USB charging cable for charging the device. Otherwise, there is a risk of improper charging.
• Do not tie up the charging cable or place objects on it.
• Do not operate or use with wet hands.
• Do not subject the device to strong impacts such as drops or collisions.
• Do not expose your eyes to the light, as it may cause physical discomfort.
• Do not place the device in a location facing the sun or under direct sunlight for extended periods.
• Do not disassemble or modify the device.
• Do not insert foreign objects into the ports or connectors of the product.
• Do not drop the device in water, immerse it in water, or leave it in the rain for a long time.
• Do not wipe the device body with thinner, gasoline, or alcohol.
• For cleaning, use a soft cloth dampened with a mild neutral cleaning solution.
• Do not use the device if there are any abnormalities such as odor, heat, discoloration, or deformation during use or storage.
• This product is intended for use by individuals aged 14 and above. Keep out of reach of young children.
• Please unplug the USB charging cable if the device is not used for a long time.
• Do not use or store the device in a state where it is covered with oil, etc.
• When disposing of the device, please follow local waste disposal regulations.
• Note: The manufacturer is not responsible for damages caused by improper use.
• Note: The LED in the product is not replaceable.

Getting to Know Your Weather Radio

Device Components:

• 1. Power Button: Controls power ON/OFF (long press) and Mute.
• 2. Pause/Playback Button: In Bluetooth mode, short press for pause/playback, long press to disconnect. In FM/AM mode, short press to switch stations, long press to auto-search for stations.
• 3. Right Navigation Button: In Bluetooth mode, short press for the next song. In FM/AM mode, short press for the next frequency, long press to search for the next station.
• 4. Volume Up Button: Increases volume.
• 5. M Key: Switches between modes (BT, FM, AM, WB, NOAA).
• 6. EQ Button: Selects audio sound effects in Bluetooth mode (Standard, Rock, Pop, Classic, Jazz, Country).
• 7. Left Navigation Button: In Bluetooth mode, short press for the previous song. In FM/AM mode, short press for the last frequency, long press to search for the previous station.
• 8. Volume Down Button: Decreases volume.
• 9. Flashlight Button: Controls the flashlight function.
• 10. Solar Panel: For charging the device via solar energy.
• 11. Camping Lantern: Provides ambient light.
• 12. Speaker: Outputs audio.
• 13. Antenna: Improves radio reception.
• 14. Hand Crank: For manual power generation.
• 15. SOS Button: Activates the SOS alarm and flashing lights.
• 16. Handle: For carrying the device.
• 17. USB-C Input Port: For charging the device.
• 18. USB Output Port: For charging external devices.
• 19. Reset Button: Resets the device if it freezes or malfunctions.
• 20. Torch: Refers to the flashlight function.
• 21. Red/Blue Alarm Flashing Lights: Part of the SOS alarm function.

How to Charge Your Lantern

4.1 Charging via USB (Type-C) Cable

1. Press and hold the power button to turn off the device. Do not charge while the device is on.

2. Open the port cover.

3. Plug the included USB (Type-C) charging cable into the input port of the device. Connect the other end of the cable to a USB adapter or your computer's USB port.

The charging indicator light on the display will illuminate red during charging and turn green when charging is complete.

4. Unplug the USB charging cable and close the port cover.

Caution:

• Only use the provided USB charging cable.
• Fully charge the device before the first use.
• Charging via a USB hub may not be effective. Use a stable power source like a USB adapter or computer port.
• Charging takes approximately 4 hours when the battery is fully depleted. Unplug the cable when the charging light turns green.
• Do not use the device while charging, as it can accelerate battery deterioration and cause damage.
• When using the device near water, ensure the port cover is securely closed.

4.2 Charging via Hand Crank

1. Press and hold the power button to turn off the device. Do not generate power while the device is on.

2. Pull out the hand crank handle.

3. Rotate the handle clockwise, starting slowly and gradually increasing speed. The charging indicator will light up red. Aim for 130-150 rotations per minute. Rotating for 30 minutes can charge approximately 200mAh.

4. Pack up the hand crank.

This method is recommended for emergencies.

4.3 Charging via Solar Panel

The battery indicator light will illuminate red when charging through the solar panel.

This method is recommended for emergency situations.

Charging External Devices (USB Output)

1. Turn off the device.

2. Open the port cover.

3. Plug the USB charging cable into the USB output port (Type-A) and connect it to the external device.

Important Notes:

• The output power is 1.5A. Do not use if the device being charged does not support 1.5A.
• The manufacturer is not responsible for damages or accidents caused by using unsupported equipment.
• Check with the external device manufacturer for compatibility. Battery life of the charged device may be affected by specifications.
• This product may not charge all external devices. Charging speed can be very slow or impossible depending on device and cable specifications.
• Some devices may only charge up to 90-99% due to specifications.
• Do not charge external devices simultaneously while charging the lantern itself.

How to Use Flashlight, Camping Lantern, or SOS Alarm

5.1 Flashlight

Press the flashlight button (9):

• First press: Long light ON.
• Second press: Flashing light.
• Third press: Light OFF.

Note: This button only controls the flashlight when the camping lantern is off. Otherwise, it controls the camping lantern.

5.2 Camping Lantern

1. Hold the handle and pull up the camping lantern.

2. Press the flashlight button to cycle through white light, yellow light, and combined yellow/white light. The fourth press turns the light off.

5.3 SOS Alarm

1. Press and hold the SOS button (15) at the bottom of the device. The alarm will sound, and the SOS light will flash red and blue.

2. Press the SOS button again to stop the alarm.

5.4 Volume Control

1. Press the '+' button to increase volume.

2. Press the '-' button to decrease volume. Volume can be adjusted from V-00 (mute) to V-27.

3. Press the Power button (1) to enter mute mode, press again to unmute.

5.5 Reset

If the device freezes, crashes, fails to charge, or becomes unresponsive after charging, it may have activated battery protection measures. To reactivate and use the device:

Insert a thin object (like a needle) into the reset hole (19) and press it to reset the device.

How to Use Bluetooth Speakers

1. Turn on the device. Press the 'M' button (5) to switch to 'BT' mode.

2. When 'BT' is flashing, turn on your phone's Bluetooth, search for 'SL10', and connect.

The 'BT' indicator will stop flashing once connected.

Playback Controls:

• Pause/Play: Short press the Pause/Playback button (2).
• Next Song: Short press the Right Navigation button (3).
• Previous Song: Short press the Left Navigation button (7).
• Disconnect Bluetooth: Long press the Pause/Playback button (2). The device will enter standby connection mode, and 'BT' will flash continuously.
• EQ Settings: In Bluetooth mode, press the EQ button (6) to cycle through 6 sound effects: Standard, Rock, Pop, Classic, Jazz, Country.

Using the Radio (AM/FM/WB/NOAA)

7.1 FM/AM Mode

Press the 'M' button (5) to switch between FM and AM modes.

7.2 Automatic Channel Search

1. Long press the station search button (2) to automatically search for radio stations.

2. The device will start frequency search from the low end, select, and save receivable channels. When the first channel is found, it stops and displays 'P01'. The second found channel stops and displays 'P02', and so on, until all receivable channels are found.

Note: The number of receivable channels depends on radio wave conditions. Manual station searches cannot be saved.

7.3 Switching Saved Channels

Press the station switch button (2). The screen display will change to 'P00' (where '00' indicates the channel number), and it will switch to the next saved channel.

7.4 Changing Frequency

1. Press the '>' button (3) to increase the radio frequency.

2. Press the '<' button (7) to decrease the radio frequency.

3. Long pressing the '>' or '<' buttons will automatically retrieve the next station but will not save it.

7.5 For Better Signal Reception

• FM: Extend the antenna (13) and aim it in the direction where the signal is clearest.
• AM: Orient the device in the direction where the signal is clearest.

7.6 WB Mode

1. Press the 'M' button (5) to switch to WB (Weather Band) mode.

2. Pressing the '>' button (3) will switch to the next WB channel.

7.7 NOAA Mode

1. When 'WB' is displayed, long press the 'M' button (5) again. Use this function when 'NOAA' is displayed on the screen.

In NOAA mode, the device automatically receives and plays weather and natural disaster information from the National Weather Service, eliminating the need for manual tuning. If the weather service is not broadcasting, no information will be played.

PLEASE NOTE: WB and NOAA functionality is only available on the SL10 device and is restricted to the USA.

Specifications

Note: For product improvement, specifications and appearance may be changed without prior notice.

Kind Reminder

• If the product gets wet, wipe off moisture with a soft cloth.
• If the product is stained, mix a small amount of neutral detergent with water, wipe with a hard cloth, and then rinse with water and dry in the shade.
• Do not wipe the device body with thinner, gasoline, or alcohol.
• Please charge the battery every 2-3 months. Failure to do so may shorten battery life and prevent recharging.
• Disconnect the device from power for storage. This can also significantly shorten battery life.
• Do not store the device in a humid environment, as metal parts may rust.

Please assist in battery recycling when disposing of this product. Lithium polymer batteries are used. For efficient resource use, follow local government waste disposal instructions.