Dr. Brown's Natural Flow Electric Breast Pump

User Instructions

Pulsating honeycomb liner uniquely stimulates breast for increased milk supply. Patented One-Way airflow to protect mom and baby from bacteria.

IMPORTANT Safety Information

Please carefully read the following instructions. Do not discard them.

Precautions Against Electrical Shock:

Precautions Against Burns, Electrocution, Fire, or Injury:

Introduction

Congratulations on the birth of your baby.

Thank you for choosing the Dr. Brown's Natural Flow Electric Breast Pump to help you provide breast milk to your baby. Whether returning to work or out for a few hours, your baby can still enjoy the benefits of your breast milk, even if you can't be there to give it yourself.

Our pump stimulates the breast with gentle pulsation and One-Way Airflow, which means faster let-down, more milk for your baby, and unrivaled comfort for you. Clinical trials show that stimulation is proven to help mothers initiate and maintain a long-term milk supply.

Many women do not express breast milk when they first try a new breast pump. Don't worry, as this is common. Try not to give up; simply wait a few minutes and try again, ensuring that you are comfortable and relaxed when expressing.

Dr. Brown's Natural Flow Electric Breast Pump Parts

The electric breast pump consists of a motor case with controls, a connector, a liner, and a bottle. The motor case is the main body of the pump, housing the motor and controls. The connector attaches the motor case to the breast flange. The liner, also known as the honeycomb liner, fits inside the connector and is placed against the breast. A bottle screws onto the bottom of the connector to collect milk.

Disassembling the Electric Breast Pump

  1. Unscrew the Bottle.
  2. Remove the honeycomb Liner.
  3. Hold the Connector and turn the Motor Case to the unlocked position. The motor case twists counter-clockwise to unlock. Align the arrows on the motor case and connector to indicate the unlocked position.

Cleaning Instructions

Gently wash the Liner, Connector, and Bottle in warm, soapy water and rinse thoroughly. Air dry or towel dry.

To clean the Motor Case, wipe down with a damp cloth. Be careful not to dislodge the purple rubber plugs. Do not remove purple rubber plugs. Do not immerse the Motor Case in water or liquids.

Note: The Liner, Connector, and Bottle can be boiled for no more than 3 minutes. These parts are also dishwasher safe, but dishwashers may reduce plastic performance over time. Microwave sterilization is not recommended as it may reduce product performance.

Reassembling the Electric Breast Pump

  1. Wash your hands thoroughly before handling parts.
  2. Insert the honeycomb Liner, ensuring the edges snap firmly into place.
  3. Screw the Bottle in firmly.
  4. Place the Motor Case onto the Connector top.
  5. Align the arrow with the open padlock symbol. Press the Motor Case firmly onto the Connector, then turn clockwise to the locked position. The motor case twists clockwise to lock. Align the arrows to indicate the locked position.

Helpful Hints

How to Use the Electric Breast Pump

  1. Plug the Power Cord into the wall socket before inserting the other end into the Motor Case on the pump.
  2. Sit in an upright position, leaning slightly forward, well supported and relaxed.
  3. Set the Vacuum Dial to the minimum position. Center the nipple into the honeycomb Liner. Turn the pump on.
  4. After a few seconds, slowly increase the Vacuum Dial to a desired comfort level. Most first-time users prefer a medium vacuum setting, while experienced users may prefer a setting between medium and maximum.
  5. If the vacuum is too low, adjust the Vacuum Dial up. If the vacuum becomes too high, press the side of the breast flange to break the vacuum, adjust the vacuum setting lower, center the nipple into the honeycomb Liner, and resume pumping.
  6. When finished expressing, turn off the breast pump, press the side of the breast flange to break the vacuum, remove the Power Cord from the Motor Case, and unplug from the wall socket.

Note: When the pump is in operation, do not lay it on its side.

Breast Milk Storage Guidelines

Breast Milk Defrosting and Warming

  1. Wash your hands thoroughly before handling breast milk.
  2. It is recommended to defrost frozen breast milk in the refrigerator. If needed quickly, defrost under cool, then warm running water.

DO NOT USE A MICROWAVE TO DEFROST OR WARM BREAST MILK.

Successful Breast Milk Expression

The Dr. Brown's Natural Flow Electric Breast Pump is simple and easy to use. It may take a few tries to succeed initially. Don't give up; refer to the helpful tips below.

If you experience difficulties with breast milk expression, consult a lactation consultant or your doctor.

Contact Information

Customer Service (English)

Servicio al cliente (Spanish)

Company Information

PDF preview unavailable. Download the PDF instead.

Dr-Browns-Electric-Breast-Pump-User-Instructions My Name

Related Documents

Preview Dr. Brown's Customflow™ BF100 Double Electric Breast Pump User Manual
Comprehensive user manual for the Dr. Brown's Customflow™ BF100 Double Electric Breast Pump, covering setup, operation, cleaning, safety, and troubleshooting for optimal milk expression.
Preview Dr. Brown's Manual Breast Pump Instruction Manual
Comprehensive instructions for using, cleaning, storing, and troubleshooting the Dr. Brown's Manual Breast Pump with SoftShape™ Silicone Shield.
Preview Dr. Brown's Silicone Breast Pump with Bag: How to Use and Care
Comprehensive guide on using and caring for the Dr. Brown's Silicone Breast Pump with Bag, including step-by-step instructions, helpful tips, and cleaning procedures.
Preview Dr. Brown's MilkSPA AC143: Breast Milk & Bottle Warmer Manual
Official instruction manual for the Dr. Brown's MilkSPA AC143 Breast Milk & Bottle Warmer. Learn about safety, operation, cleaning, and troubleshooting.
Preview Dr. Brown's MilkSPA™ Breast Milk & Bottle Warmer - Instructions for Use
Official instruction manual for the Dr. Brown's MilkSPA™ Breast Milk & Bottle Warmer (Model AC143), providing detailed guidance on safe operation, setup, usage, cleaning, and troubleshooting.
Preview Dr. Brown's Customflow BF100 Double Electric Breast Pump Instruction Manual
Detailed instruction manual for the Dr. Brown's Customflow BF100 Double Electric Breast Pump, covering setup, usage, cleaning, safety, and troubleshooting for optimal milk expression.
Preview Dr. Brown's Manual Breast Pump with SoftShape™ Silicone Shield - User Guide
Comprehensive instructions for using, assembling, cleaning, storing, and troubleshooting the Dr. Brown's Manual Breast Pump with SoftShape™ Silicone Shield. Includes safety information and breast milk storage guidelines.
Preview Dr. Brown's Customflow Double Electric Breast Pump Manual
Comprehensive user manual for the Dr. Brown's Customflow Double Electric Breast Pump (Model BF100), covering intended use, product description, components, cleaning, assembly, operation, troubleshooting, storage, and warranty information.