ℹ️ Document Conversion Notice: This document has been converted from PDF and formatted to fit this screen. Diagrams and images may be available only in the original here.

Installation Guide

Product: Omada 25GBase SFP28 LC Transceiver

Models: SM6110-SR, SM6110-LR

Brand: by tp-link

For technical support, replacement services, user guides, and more, please visit https://support.omadanetworks.com/, or simply scan the QR code.

Note: The transceiver may be incompatible with other vendors' devices. TP-Link recommends using only Omada transceivers on Omada devices.

Install the Transceiver

Wear an ESD-preventive wrist or ankle strap [ESD strap] to prevent ESD damage to the transceiver.
Insert the transceiver into the slot and firmly press it into place.
Remove the protective dust plug [dust plug] from the transceiver.
Plug fiber-optic cables [fiber optic cable] into the transceiver. Note that the transceiver works without any additional configuration.

Diagram Description: Visuals show the step-by-step process of inserting the transceiver into a switch port, including wearing an ESD strap, inserting the module, and connecting fiber optic cables.

Remove the Transceiver

Wear an ESD-preventive wrist or ankle strap [ESD strap] to prevent ESD damage to the transceiver.
Disconnect the network fiber-optic cables [fiber optic cable] from the transceiver.
Pull the safety latch [safety latch] downwards to release the transceiver, and then pull it out from the slot.
Reinstall the protective dust plug [dust plug] in the transceiver's optical bores and place it on an antistatic mat or a static shielding bag [antistatic bag].

Diagram Description: Visuals illustrate the removal process, including disconnecting cables, releasing a safety latch, and reattaching the dust plug.

Connection

Only use the same transceiver model between switches for fast and reliable connectivity. For simplicity, the SM6110-SR model is used as an example.

Diagram Description: A diagram shows two network switches connected via a fiber optic cable. Each switch has an SM6110-SR transceiver installed.

Note: This transceiver supports auto-configuration. When plugged into a switch port of 25Gbps, the module operates at 25Gbps; for a switch port of 10Gbps, it automatically adjusts to 10Gbps.

Specifications

Feature	SM6110-SR	SM6110-LR
Model	SM6110-SR	SM6110-LR
Wave Length	850 nm	1310 nm
Standards and Protocols	IEEE 802.3ae, IEEE 802.3by, SFF-8402, SFF-8402, SFF-8431, SFF-8432, SFF-8472, eCPRI, CPRI, TCP/IP	IEEE 802.3ae, IEEE 802.3cc, SFF-8402, SFF-8431, SFF-8432, SFF-8472, eCPRI, CPRI, TCP/IP
Cable Type	MMF 50/125 um	SMF 9/125 um
Max. Cable Length	70 m (OM3) @25.78Gbps, 100 m (OM4) @25.78Gbps, 300 m (OM3) @10.31Gbps	10 km
Data Rate	10.31 Gbps/25.78 Gbps	10.31 Gbps/25.78 Gbps
Port Type	LC Duplex	LC Duplex
Power Support	3.3 V	3.3 V
Safety & Emission	FCC, CE, RoHS	FCC, CE, RoHS
DDM	Yes	Yes
SFP28 MSA	Yes	Yes
Hot Swappable	Yes	Yes
Laser Class	Class 1	Class 1
Max. Laser Output Power	1.74 mW (2.4 dBm)	1.66 mW (2.2 dBm)
Operating Temperature	0°C to 70°C (32°F to 158°F)	0°C to 70°C (32°F to 158°F)
Storage Temperature	-40°C to 85°C (-40°F to 185°F)	-40°C to 85°C (-40°F to 185°F)
Operating Humidity	5% to 85% RH Non-condensing	5% to 85% RH Non-condensing
Storage Humidity	5% to 90% RH Non-condensing	5% to 90% RH Non-condensing

Safety Information

Keep the device away from water, fire, humidity, or hot environments.
Do not attempt to disassemble, repair, or modify the device. For service, contact TP-Link.
Avoid using this product during an electrical storm. There is a remote risk of electric shock.
Do not point or stare directly into the beam or into the optical port of the transceiver when it is operating, as this can injure your eyesight.
Caution: Use of controls, adjustments, or procedures other than those specified herein may result in hazardous radiation.

Declarations and Compliance

EU Declaration of Conformity

TP-Link declares that the transceiver complies with essential requirements and relevant provisions of directives 2014/30/EU, 2014/35/EU, 2011/65/EU, and (EU)2015/863. The original EU declaration of conformity can be found at https://www.tp-link.com/en/support/ce/.

UK Declaration of Conformity

TP-Link declares that the transceiver complies with essential requirements and relevant provisions of the Electromagnetic Compatibility Regulations 2016 and Electrical Equipment (Safety) Regulations 2016. The original UK Declaration of Conformity can be found at https://www.tp-link.com/support/ukca/.

FCC Compliance Information Statement

Product Name: Omada 25GBase-SR SFP28 LC Transceiver / Omada 25GBase-LR SFP28 LC Transceiver

Model Number: SM6110-SR / SM6110-LR

Responsible Party: TP-Link Systems Inc.

Address: 10 Mauchly, Irvine, CA 92618

Website: https://www.tp-link.com/us/

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Industry Canada Statement

CAN ICES-003 (A)/NMB-003(A)

CE Mark Warning

This is a Class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.

Product certified according to the rules of the UkrSEPRO system for compliance with the requirements of regulatory documents and requirements stipulated by current legislation of Ukraine.

Explanation of Symbols

Note: The product label can be found at the bottom of the product. Symbols may vary from products.

Symbol	Explanation
[Class II equipment symbol]	Class II equipment
[functional earthing symbol]	Class II equipment with functional earthing
~	Alternating current
⎓	Direct current
⎓ polarity	Polarity of DC power connector
[indoor use symbol]	For indoor use only
[dangerous voltage symbol]	Dangerous voltage
[electric shock symbol]	Caution, risk of electric shock
[energy efficiency symbol]	Energy efficiency marking
[protective earth symbol]	Protective earthing
[earth symbol]	Earth
[frame symbol]	Frame or chassis
[functional earthing symbol]	Functional earthing
[hot surface symbol]	Caution, hot surface
⚠️	Caution
[manual symbol]	Operator's manual
[stand-by symbol]	Stand-by
[ON/OFF symbol]	"ON"/"OFF" (push-push)
[fuse symbol]	Fuse
[fuse N symbol]	Fuse is used in neutral N
♻️	RECYCLING: This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. Users have the choice to give their product to a competent recycling organization or to the retailer when they buy new electrical or electronic equipment.
[volume warning symbol]	Caution, avoid listening at high volume levels for long periods
[disconnection symbol]	Disconnection, all power plugs
[switch types symbols]	Switch of mini-gap construction, Switch of micro-gap construction (for US version), Switch of micro-gap / micro-disconnection construction (for other versions except US), Switch without contact gap (Semiconductor switching device)

Models: SM6110-LR UN 1.20, SM6110-SR UN 1.20, SM6110-LR 25GBase SFP28 LC Transceiver, SM6110-LR, 25GBase SFP28 LC Transceiver, LC Transceiver, Transceiver

File Info : application/pdf, 2 Pages, 2.35MB

JavaScript is disabled. Open the PDF or Download.

7100001533 SM6110-LR(UN) 1.20, SM6110-SR(UN) 1.20 IG REV1.2.0

References

Adobe PDF library 15.00 Adobe Illustrator(R) 24.0

Related Documents

	TP-Link Omada SM6110-LR 25GBase-LR SFP28 LC Transceiver Datasheet Datasheet for the TP-Link Omada SM6110-LR, a 1310 nm single-mode SFP+/SFP28 LC transceiver designed for 10G/25G Ethernet connectivity up to 10 km. Features include DDM, hot-pluggability, and low power consumption.
	TP-Link Product Catalog: IP Cameras, Modems, Routers, Switches, and More A comprehensive catalog of TP-Link networking and smart home products, including IP/AHD cameras, VDSL/ADSL modems, routers, access points, switches, adapters, and accessories. Browse detailed product specifications and pricing.
	Omada SX6632YF Datasheet: 26-Port 10G SFP+ Stackable L3 Managed Switch Detailed datasheet for the TP-Link Omada SX6632YF, a 26-port 10G SFP+ stackable L3 managed aggregation switch with 6x 25G slots, highlighting its features, specifications, and ordering information.
	TP-Link Omada SFP Module Installation Guide Concise installation guide for TP-Link Omada SFP modules, covering installation, removal, connection, safety information, and declaration of conformity.
	TP-Link Omada OJB-100 Wall Plate Access Point Junction Box - Specifications and Features Detailed specifications, features, and mounting options for the TP-Link Omada OJB-100 Wall Plate Access Point Junction Box. Learn about its compatibility and installation versatility.
	TP-Link Omada SG6428XHP(UN) Firmware v1.20 Release Notes Release notes for TP-Link Omada SG6428XHP(UN) firmware version 1.20, detailing new features, enhancements, and bug fixes for Omada Central and system stability.
	TP-Link Omada Firmware Release Notes v5.1.2 Release notes for TP-Link Omada firmware version 5.1.2, detailing minimum version requirements, enhancements, and compatibility with Omada Controller v5.7 and Omada APP v4.10.
	TP-Link Omada Hardware Controller OC220 Installation Guide Comprehensive installation guide for the TP-Link Omada Hardware Controller (OC220), covering package contents, hardware overview, installation steps (desktop and wall mounting), power options, network topology, and software configuration for remote and local management.