SWIT S-3822A/S Lithium Battery Charger
User Manual
SWIT Electronics Co., LTD.
Tel: +86-25-85805753
Fax: +86-25-85805296
Website: http://www.swit.cc
Email: contact@swit.cc
Congratulations on your purchase of this product. Please read this user manual carefully.
Warning
- Never expose the battery charger to rain or moisture.
- Never attempt to open the battery charger; please contact the local agent if you have problems.
- Never use metal or other conductors to touch the inside of the battery charger.
- Never short-circuit the battery charger terminals.
- Please ensure the voltage range is fit for the battery charger.
- Please use the power adapter provided by the manufacturer in order to avoid damage.
- Never use the battery charger if it is already damaged.
Caution
- Only limited to charge specified battery(ies); it may cause danger if other battery(ies) are charged due to incompatibility problems.
- Keep the terminals clean and ensure the reliable connection.
- It is a normal phenomenon that the battery charger may become warm during use.
- Please unplug the power lead if the battery charger is not used for a long time.
- Do not cover the cooling vent.
- Please do not put the battery charger in an unstable place; it may fall and cause serious damage.
- Store the battery charger in a cool, dry, and clean place.
Features
- 2-channel independent charging and controlling system, capable of 3A charging two batteries simultaneously.
- One channel AC-DC adaptor output via 4-pin XLR, maximum power output reaches 90W.
- LED lights indicate the real-time working status.
Product Appearance
The product has the following components:
- ① Charging channel (V-mount/Gold-mount)
- ② Battery release button
- ③ Charging LED indicator
- ④ Adapting LED indicator
- ⑤ Power switch
- ⑥ Power input socket
- ⑦ 4-PIN XLR DC output socket
Diagram Description: The diagram shows two charging bays side-by-side. Each bay has a battery release button and an LED indicator. There is a power switch, a power input socket, and a 4-pin XLR DC output socket on the unit. The diagram also illustrates the connection points for batteries and the output socket.
KC Certified Cordset:
- Plug/Connector: 250VAC~ 10A
- Cord: VDE 40039523
Specifications
| Specification | Value |
|---|---|
| Input | 100~240VA, 50/60Hz |
| Power | 138W(Max) |
| Charging Output | DC 16.8V, 3A(Max)×2 |
| Adapting Output | DC 15V, 6A(Max) |
| Working Temperature | -20°C~+50°C |
| Working Humidity | 10%~90% |
| Dimension of packing | 255mm×155mm×120mm |
| Dimension of products (with battery mount) | 228mm×140mm×86mm (S-3822A) 228mm×140mm×102mm (S-3822S) |
| Dimension of products (without battery mount) | 228mm×140mm×60mm |
| Weight | Appx 1.0kg |
Charging
Two charging channels are independent channels and can charge simultaneously.
- Connect with power lead, turn on the power switch.
- Mount battery(ies) onto the charging channel(s), and it starts to charge the mounted battery(ies) simultaneously. The LED light(s) of the related charging channel(s) will indicate like these:
- Red: the battery capacity is below 100%
- Green: fully charged
- Red flash: the charging may have problem
- When fully charged, press the battery release button and take out the battery(ies).
Adapting Output
The S-3822A/S offers one channel 4-pin XLR adapting output.
- Connect with power lead, turn on the power switch, and the adapting LED indicator will light on.
- Connect the adapting output to power consuming equipment.
Note:
- When adapting output, please make sure the voltage and power of the power consuming equipment meet the requirement (15V, 6A).
- S-3822A/S does not support charging and adapting output at the same time. If channel(s) are inserted with battery(ies) during charging, there will be no DC output. When no battery is mounted, there will be adapting output.
Related Documents
 |
SWIT S-3822A/S: 2-Channel Simultaneous Battery Charger & Adaptor Explore the SWIT S-3822A/S, a professional 2-channel simultaneous battery charger and adaptor. This device supports V-Mount and Gold Mount batteries, offering 3A charging per channel, LED status indicators, and an AC-DC XLR output. |
 |
SWIT S-3822A/S/B Lithium Battery Charger User Manual User manual for the SWIT S-3822A/S/B Lithium Battery Charger, detailing features, specifications, compatible batteries, charging, and adapting output functions. |
 |
SWIT S-3822A/S: 2-Channel Simultaneous Battery Charger & Adaptor Overview of the SWIT S-3822A/S, a portable 2-channel simultaneous battery charger and adaptor. Features include 3A charging current per channel, LED indicators, and AC to 4-pin XLR output. Specifications cover input power, charging output, adapting output, operating temperature, dimensions, and weight. |
 |
SWIT S-3822A/S Lithium Battery Charger User Manual User manual for the SWIT S-3822A/S Lithium Battery Charger, detailing its features, specifications, product appearance, charging instructions, and adapting output functionality. |
 |
SWIT PB-C420S V-Mount Battery User Manual - Features, Specifications, and Safety User manual for the SWIT PB-C420S V-Mount Battery. Details features, charging, discharging, appearance, specifications, and troubleshooting for this 29.4Ah, 14.4V battery. |
 |
SWIT Rechargeable Li-ion Battery Pack User Manual User manual for SWIT rechargeable Li-ion battery packs, detailing safety precautions, features, and specifications for various models including S-8082A, S-8110A, S-8113S, and S-8073N. |
 |
SWIT PB-C420S/C420A Li-ion V-Mount Battery User Manual User manual for SWIT PB-C420S and PB-C420A Li-ion V-Mount Batteries. Provides safety precautions, features, specifications, and troubleshooting guidance for professional camera power solutions. |
 |
SWIT BIVO-98/160/200/290 Rechargeable Li-ion Battery User Manual User manual for SWIT BIVO-98, BIVO-160, BIVO-200, and BIVO-290 rechargeable Li-ion batteries. Covers safety precautions, product features, charging and discharging instructions, OLED display functions, indicator lights, troubleshooting, and detailed specifications. |