SWIT S-3822A/S/B Lithium Battery Charger User Manual
SWIT Electronics Co.,LTD.
Tel: +86-25-85805753 | Fax: +86-25-85805296 | http://www.swit.cc | E-mail: contact@swit.cc
Congratulations
Congratulations on your purchase of this product. Please read this user manual carefully.
Warning
- Never expose the battery charger to rain or moisture.
- Never attempt to open the battery charger; please contact the local agent if you have problems.
- Never use metal or other conductors to touch the inside of the battery charger.
- Never short-circuit the battery charger terminals.
- Please make sure the voltage range is fit for the battery charger.
- Please use the power adapter provided by the manufacturer in order to avoid damage.
- Never use the battery charger if it is already damaged.
Caution
- Only limited to charge specified battery(ies); it may cause danger if charging other battery(ies) due to incompatibility problem.
- Only work in the temperature between 0°C - +45°C.
- Keep the terminals clean and ensure the reliable connection.
- It is a normal phenomenon that the battery charger may become warm in use.
- Please unplug the power lead if the battery charger is not used for a long time.
- Do not cover the cooling vent.
- Please do not put the battery charger in an unstable place; it may fall and cause serious damage.
- Store the battery charger in a cool, dry, and clean place.
Features
- 2-channel independent charging and controlling system, capable of 3A charging two batteries simultaneously.
- One channel AC-DC adaptor output via 4-pin XLR, maximum power output reaches 90W.
- LED lights indicate the real-time working status.
Product Appearance
The product has the following components:
- 1. Charging channel: Supports V-mount, Gold-mount, and B-mount batteries.
- 2. Battery release button: Used to detach the mounted battery.
- 3. Charging LED indicator: Shows the charging status of the battery.
- 4. Adapting LED indicator: Shows the status of the adapting output.
- 5. Power switch: Turns the device on or off.
- 6. Power input socket: For connecting the power cord.
- 7. 4-PIN XLR DC output socket: For DC power output.
Included accessories: KC certified Cordset, Plug/Connector :250VAC~ 10A, Cord: VDE 40039523.
Specifications
| Input | 100~240VA, 50/60Hz |
|---|---|
| Power | 138W(Max) |
| Charging Output | DC 16.8V, 3A(Max) × 2 |
| Adapting Output | DC 15V, 6A(Max) |
| Working Temperature | 0°C ~ +45°C |
| Working Humidity | 10% ~ 90% |
| Dimension |
|
| Weight | Approx 1.0kg |
Compatible Batteries
- S-3822A: SWIT 14.4V Gold-mount battery.
- S-3822S: SWIT 14.4V and high voltage and dual voltage V-mount batteries, SONY 14.4V V-mount battery.
- S-3822B: SWIT high voltage and dual voltage B-mount battery.
Charging
Two charging channels are independent channels and can charge simultaneously.
- Connect with power lead, turn on the power switch.
- Mount battery(ies) onto the charging channel(s), and it starts to charge the mounted battery(ies) simultaneously. The LED light(s) of the related charging channel(s) will indicate like these:
- Red: The battery capacity is below 100%
- Green: Fully charged
- Red flash: The charging may have a problem.
- When fully charged, press the battery release button and take out the battery(ies).
Adapting Output
The S-3822A/S/B offers one channel 4-pin XLR adapting output.
- Connect with power lead, turn on the power switch, and the adapting LED indicator will light on.
- Connect the adapting output to power-consuming equipment.
Note:
- When adapting output, please make sure the voltage and power of the power-consuming equipment meet the requirement (15V, 6A).
- S-3822A/S/B does not support charging and adapting output at the same time. If channel(s) are inserted with battery(ies) during charging, there will be no DC output. When no battery is mounted, there will be adapting output.
SWIT Global Website
