Gaggenau VI 422 613 Vario 400 Series Flex Induction Cooktop

Product Overview

The Gaggenau Vario 400 series flex induction cooktop (VI 422) offers free positioning of cookware within its combined cooking areas. It features a frying sensor function for precise temperature control in pans and intuitive operation via a bi-coloured display. The cooktop is distinguished by its solid stainless steel control knobs and a precision-crafted 1/8" stainless steel frame. It is designed for both surface-mount installation with a visible edge and flush installation, and can be seamlessly combined with other Vario 400 series appliances.

Key Features

• Flex function for rectangular cooking areas.
• Frying sensor function for temperature control.
• Booster function for rapid heating.
• Stopwatch and short-term timer functions.
• Bi-coloured display (white / orange) for user-friendly control.
• Electronic power control with 17 output levels.
• Home network integration via WiFi for digital services (Home Connect).
• Cooktop-based ventilation control when paired with compatible downdraft ventilation systems (e.g., VL 414 712).

Cooking Zones

Two flex induction cooking areas:

• Small area: 7 1/2" x 9" (2200 W, with booster 3700 W)
• Large area: 15" x 9" (3300 W, with booster 3700 W)

Operation

• Control knobs with illuminated ring, cooking zone, and output level markings.
• Electronic power control in 17 output levels.
• User-friendly control with bi-coloured display (white / orange).

Safety Features

• Operation indicator.
• Pot detection.
• Digital 2-stage residual heat indicator.
• Safety shut-off.

Combinable Appliances

This cooktop can be combined with:

• VL414712
• AL400721
• AI442720 / AI442760
• AW442720 / AW442760
• AF210791

Optional Accessories

• GP 900 001: Stainless steel frying pan (non-stick cooking, ø 6")
• GP 900 002: Stainless steel frying sensor pan (non-stick coating, ø 7")
• GP 900 003: Stainless steel frying pan (non-stick coating, ø 8")

For combinations of several Vario cooktops, connecting strips (VA 420 000 for flush mounting, VA 420 010 for surface mounting) must be used.

Installation Notes

General:

• Wall installations require the hood to be as large as the cooktop(s). Island installations require the hood to be larger than the cooktop(s).
• Operates with magnetic (induction) iron pots and pans only. Flat bottom cookware is recommended for optimal heat distribution.
• To ensure correct operation, the cooktop requires sufficient ventilation from the rear or base of the cabinet. Refer to installation instructions for details.
• Appliance can be snapped into the countertop from above.
• Appliance weight: approximately 22 lbs.

Surface-mount Installation:

• Countertop Cut-out: 14 15/16 inches (380 mm) wide by 20 1/2 inches (520 mm) deep.
• A 1/8 inch (3 mm) stainless steel frame is visible around the edge.
• Minimum cabinet width required: 59 1/16 inches (1500 mm).
• Minimum clearances: 1 3/8 inches (35 mm) from the front edge, 1 15/16 inches (50 mm) from the rear.

Flush-mount Installation:

• Countertop Cut-out: 14 3/16 inches ± 1/16 inch (360 ± 1 mm) wide by 19 3/8 inches ± 1/16 inch (492 ± 1 mm) deep.
• Installation is possible in countertops made of stone, synthetics, or solid wood.
• Heat-resistant and watertight sealing of cut edges is required. Consult the countertop manufacturer for suitable heat-resistant filler.
• A continuous and even groove is necessary for uniform placement of the appliance on the gasket.
• The joint width may vary due to tolerances.
• If installing multiple Vario products in individual cut-outs, allow a minimum distance of 2 inches (50 mm) between cooktops.
• Immersion depth: 2 5/8" to 2 3/4" (70 mm) depending on installation type.

Control Knob Installation:

• If the panel thickness exceeds 1 inch (23 mm), a recess at the rear must be provided for the control knob installation.

Ventilation:

• Sufficient ventilation from the rear or base of the cabinet is crucial. Minimum clearance of 1 15/16 inches (50 mm) is recommended for ventilation.

Countertop Support:

• For thin countertops, ensure adequate support for the appliance weight and additional loads using suitable substructures.

Rating

• Power: 3,120 W (208 / 220 V) / 3,600 W (240 V)
• Minimum Fuse Protection: 15 A
• Electrical: 208 / 220-240 V / 60 Hz
• Electrical Connection: Hardwire required, 59" cable length.