Govee Smart Tower Fan

Quick Start Guide

Assembly Instructions

1. Place the fan body on a dry, level surface.
2. Unscrew the plastic nut from the fan bottom.
3. Assemble the front base plate and the rear base plate together as a whole. This involves aligning the two halves of the circular base and snapping them together.
4. Pass the power cord through the central hole of the assembled base plate and fasten the base plate securely to the fan body using the plastic nut.
5. Pass the power cord through the hole of the screw nut and tighten the screw with the base plate, ensuring the cord is routed correctly.
6. Fix the power cord into the buckle on the underside of the base plate to secure it, and then place the fan properly on a level surface.

Caution: This fan should be plugged into a standard US 120V, 60Hz outlet. Compatibility should be checked if the fan will be used in other areas outside the US.

Functions & Controls

Control Buttons

• Mode Button (M): Used to cycle through different fan modes.
• Timer Button (⏱️): Used to set a timer for fan operation.
• Speed Button (?): Used to adjust the fan speed.
• Power Button (⏻): Used to turn the fan on or off.
• Oscillation Button (?): Used to activate or deactivate the fan's oscillation feature.

Pairing Your Smart Tower Fan with Govee Home App

1. To download the Govee Home App, scan the QR code (not provided in HTML) or search "GOVEE" in the Apple App Store (for iOS devices) or Google Play Store (for Android devices).
2. Turn on your smartphone's Bluetooth.
3. Open the Govee Home App, tap the "+" icon in the top right corner, and search for "H7101".
4. Tap the device icon and follow the on-screen instructions to complete the pairing process.

Note:

• Due to ongoing updates and improvements, the Govee Home App's interface and features may be slightly different than those shown in the manual.
• The Govee Home App can be used to connect the Smart Tower Fan to Amazon Alexa or Google Assistant for voice control.