Govee H7101 Smart Tower Fan User Manual

Introduction

The Govee Smart Tower Fan circulates cool air or warmth throughout a room, offering variable speed control to meet diverse needs.

Part Names

The Govee H7101 Smart Tower Fan consists of the following main parts:

• Control Panel: Located at the top of the fan for easy access to settings.
• Air Outlet: The front vertical grille through which air is expelled.
• Front Base Plate: One half of the fan's circular base.
• Rear Base Plate: The other half of the fan's circular base, which connects with the front plate.
• Power Cord: The electrical cable extending from the base.
• Power Plug: The end of the power cord for connecting to an electrical outlet.
• Screw Nut: A component used to secure the base plates.
• Built-in Handle: Located at the top rear of the fan for convenient carrying.
• Air Inlet: Vertical grilles on the back of the fan where air is drawn in.
• Wind Wheel: An internal component responsible for air circulation.

Safety Instructions

READ AND SAVE THESE INSTRUCTIONS

General Safety

• Only use the fan as described in this manual.
• To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control device.
• Do not operate this fan if it has been damaged.
• Supervision is required during the installation, operation, cleaning, and maintenance of this fan by children under age 12 or anyone with reduced physical, sensory, or mental capabilities. Children should be supervised to ensure they do not play with the fan, its parts, and packaging material.
• Do not insert fingers or foreign objects in any opening of the fan and do not obstruct the air vents.
• Do not place this fan near any fabric such as curtains and tablecloths, as they might be sucked into the fan and damage the motor and/or cause a fire.
• Do not place any part of this fan (the whole machine, power cord, plug, packaging, etc.) near high-temperature heat sources such as hearths, fireplaces, and stoves.
• Do not use this fan on windows, uneven or unstable surfaces, or near water.
• Do not immerse the fan in water and never allow water to drip into the motor housing.
• Unplug this fan from power if it is being moved, repaired, cleaned, used during a thunderstorm, left unattended for a long time, or not in use.
• Do not use gasoline, paint thinner, or other chemicals to clean the fan.
• CAUTION: This product employs overload protection (fuse). A blown fuse indicates an overload or short-circuit situation. If the fuse blows, unplug the fan from the outlet. Replace the fuse as per the user servicing instructions (follow product marking for proper fuse rating) and check the fan. If the replacement fuse blows, a short-circuit may be present, and the fan should be discarded or returned to an authorized service facility for examination and/or repair.

Power Cord & Plug

• This fan has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
• Never use the cord as a handle or otherwise yank, strain, or stretch the power cord.
• Place the fan near the plug so that it can be unplugged immediately from the power if an emergency occurs.
• Do not operate this fan with a damaged cord or plug.
• Do not run the cord under carpeting. Do not cover the cord with throw rugs, runners, or similar coverings. Do not route the cord under furniture or appliances. Arrange the cord away from traffic areas and where it will not be tripped over.
• If the power cord or the plug is damaged, contact customer service or similar professionals for repair to avoid danger.

Risk of Electric Shock & Leakage

• Ensure that all parts of the whole machine have been installed before using, including the front guard, fan blades, and the rear guard.
• Do not insert any foreign objects in the air inlet or outlet when the fan is powered on, as this may damage the fan itself, cause electric shock, or fire.
• If any part of the fan is damaged in operation, contact customer service or professionals for repair or replacement. Do not risk repairing or replacing by yourself.
• WARNING: To reduce the risk of electric shock, do not expose the fan to water or rain.

Included in the Box

Controls

• Power Button (⏻)

  Touch to power the fan on or off. To restore the fan to factory settings and disconnect it from Wi-Fi and Bluetooth, press and hold the Power Button and Speed Button for 10 seconds.

• Oscillation Button (⟳)

  Touch to start or stop the fan's oscillation.

• Mode Button (M)

  Touch to cycle through Normal Mode, Nature Mode, and Sleep Mode.

  • Normal Mode: Operates continuously at the current speed.
  • Nature Mode: Simulates a gentle breeze, providing a natural feel.
  • Sleep Mode: Progressively decreases the fan speed until it reaches the lowest setting, running continuously to aid sleep.

• Timer Button (⏱️)

  Touch to set a timer for the fan's operation.

• Speed Button (⚙️)

  Touch to cycle through High Speed III, Medium Speed II, and Low Speed I. To turn the Safety Lock on or off, press and hold the Timer Button and Speed Button for 3 seconds.

Indicator Status

Functions

Memory Function

The fan will remember its previous settings when powered off. These settings will become active again when the fan is turned back on.

Safety Lock

Press and hold the Timer Button and Speed Button to turn the safety lock on or off.

Getting Started

Do not plug the fan into power before completing the following assembly steps:

1. Place the fan body on a dry, level surface.
2. Assemble the front base plate and the rear base plate together to form a complete base.
3. Pass the power cord through the hole in the base plate, then fasten the base plate securely to the fan body.
4. Pass the power cord through the hole of the screw nut and tighten the screw with the base plate to further secure it.
5. Fix the power cord into the buckle on the base plate and place the fan properly on a level surface, ensuring stability.

Govee Home App

Additional features are accessible using the Govee Home App.

Downloading Govee Home App

To download the Govee Home App, search for “Govee” in the Apple App Store® (iOS) or Google Play Store (Android). The app icon typically features the Govee logo.

Note:

• Choose “Allow” for permissions requested when opening the Govee Home App for the first time. These permissions enable the app's features to function normally and are not used to record personal, private information.
• Due to ongoing updates, the Govee Home App may appear slightly different from what is shown in this manual. Always follow the in-app instructions in case of any discrepancies.

Pairing with Govee Home App

1. Turn on your smartphone's Bluetooth.
2. Open the Govee Home App, tap the “+” icon in the top right corner, and search for “H7101.”
3. Tap the device icon and follow the on-screen instructions to complete the pairing process.

Note:

• The Govee Home App allows connection of the tower fan to Amazon Alexa or Google Assistant. Follow the in-app instructions to connect to each voice assistant.
• The Govee Home App is continually updated, and its features expand over time.

User Servicing Instruction

Cleaning

For optimal performance, clean the fan at least once during the operating season or before storing it for a long period.

• Turn the fan off and unplug it from power. Use a soft, damp cloth to clean its body, air inlet, and outlet.
• Do not immerse the fan in water and never allow water to drip into the motor housing.
• Do not attempt to detach the fan to clean its blade, as this may damage the fan or shorten its lifespan.

Maintenance

Fuse Replacement

Note: The product requires a 2.5 A, 125 V fuse.

1. Grasp the plug and remove it from the socket or other outlet device. Do not unplug by pulling the cord.
2. Slide to open the fuse cover located on top of the plug towards the blades.
3. Carefully remove the fuse by using a small screwdriver to pry it out of the compartment by its metal ends.
4. Replace only with a 2.5A, 125 V fuse to avoid the risk of fire.
5. Close the fuse cover by sliding it back into place on top of the attachment plug.
6. Risk of fire. Do not replace the attachment plug itself. It contains a safety device (fuse) that should not be removed. Discard the product if the attachment plug is damaged.

The fuse replacement process involves opening a small compartment on the plug, removing the old fuse, inserting a new one of the specified rating, and then closing the compartment securely.

• The fan blade cannot be detached. Do not forcibly pry open the part used to fix the blade, otherwise it cannot be restored.
• The motor is permanently lubricated and requires no oiling.
• Any other servicing not mentioned in this manual should be performed by a professional repair center.

Troubleshooting

This section addresses frequently asked questions. If problems persist, contact customer support.

For Govee Smart Tower Fan

For App & Connectivity

1. Cannot connect to Govee Home App.
   • Ensure your smartphone is powered on and not connected to other Bluetooth devices.
   • Enable the smartphone's Location Services.
   • Try connecting with another smartphone.
   • Ensure your app is updated to the latest version.
   • Ensure you are connected to your Wi-Fi router's 2.4GHz network and that the network is working correctly.
   • Ensure the Wi-Fi password you entered is correct.
   • Shorten the distance between the fan, Wi-Fi router, and the smartphone.
   • Ensure your fan and Wi-Fi router are located away from appliances that produce electromagnetic radiation (e.g., microwave ovens, refrigerators, etc.).
   • If using a VPN, try turning it off before connecting the fan.
   • Disable portal authentication for your Wi-Fi network. If portal authentication is enabled (requiring sign-in through a web page), this fan will not be able to access your Wi-Fi network, and setup will fail.
2. Cannot find the device on the Bluetooth Device Nearby page of the app.
   • The fan may be connected to another smartphone. Disconnect it from the other smartphone first.
3. The fan is offline.
   • Ensure the fan is plugged in and powered on, then refresh “My Devices” in the Govee Home App by swiping down on the screen.
   • Ensure your router is connected to the internet and your phone's network connection is working.
   • If the Wi-Fi password has been changed, the fan will automatically go offline. Try connecting it to the network again.
   • Delete the offline fan from the Govee Home App, then add and reconfigure the fan in the app.

Appendix

Specifications

Compliance Information

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warning: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.

FCC Radio Frequency Exposure Statement

The device has been evaluated to meet general RF exposure requirements. The device can be used in fixed/mobile exposure conditions. The minimum separation distance is 20cm.

IC Statement

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

This Class B digital apparatus complies with Canadian ICES-003.

IC RF Statement:

When using the product, maintain a distance of 20cm from the body to ensure compliance with RF exposure requirements.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Shenzhen Intellirocks Tech. Co., Ltd. is under license.

After-Sales Service

• Warranty: 12-Month Limited Warranty
• Support: Lifetime Technical Support
• Email: support@govee.com
• Official Website: www.govee.com
• Social Media: @Govee, @goveeofficial, @govee.official, @Goveeofficial, @GoveeOfficial