Introduction
Thank you for purchasing the Tracer Cutter 2 TRX shredder. Please read this manual carefully before using the device.
Safety Warnings
- ⚠️ Keep loose clothing, such as ties ?, jewelry ?, hair ?♀️, and other small objects away from the paper feed slot to avoid injuries.
- Turn off the shredder when not in use for an extended period.
- Remove paper clips ? and staples ?️ before shredding paper. While the shredder can cut through staples, it is not recommended.
- ✋ Do not place hands or fingers ? in the shredder slot—this can cause serious injury.
- Always turn off or unplug the shredder before moving, cleaning, or emptying the waste bin.
- Frequently empty the waste bin.
- The shredder must always be turned off and unplugged before moving, transporting, cleaning, or emptying the waste bin.
- Do not shred credit cards ?, CDs ?, DVDs, and paper at the same time.
- Do not use the shredder if the power cord is damaged.
- For indoor use only.
- ⚠️ WARNING: This equipment may be used by children aged 8 and above, or individuals with reduced physical, sensory, or mental capabilities, or those lacking experience or knowledge of the equipment, ONLY under supervision or after they have been given instructions on its safe use and understand the risks involved. Children should not play with the equipment. Cleaning and maintenance should not be performed by children unless they are over 8 years old and under supervision.
- To protect the device, it is recommended that the user operates it as follows: 3 minutes of use / 1 hour of rest.
- ? Do not spray flammable gases or oils on the device; this may cause a fire.
- This device is not intended for use by children. Avoid contact with the feed opening using hands, hair, or clothing. Unplug the device if not used for an extended period. The device contains hazardous moving parts. It is unsuitable for use in areas frequented by children.
- ? Sharp edges. Do not touch.
Technical Specifications
| Specification | Details |
|---|---|
| Model | TRANIS47631 |
| Cutting Style | Cross-cut (5 × 16 mm) |
| Entry Width | 220 mm |
| Shredding Capacity | Up to 12 sheets of A4 paper (80 g/m²), 1 CD, 1 credit card |
| Waste Bin Capacity | 21 L |
| Separate Bin Capacity (Cards/CDs) | 0.8 L |
| Power Supply | 230 V AC, 50 Hz, 1.7 A, 380 W |
| Dimensions | 360 mm x 244 mm x 400 mm |
| Net Weight | 5.2 kg |
Safety Symbols
- ⚠️ Warning: Read the safety instructions before using the device. Improper handling may result in injury.
- This device is not a toy – it is not intended for children.
- Keep hair away from the feed slot.
- Do not touch the feed slot with hands.
- Do not insert paper clips ? or staples ?️ into the slot.
- Beware of loose clothing, long necklaces, or bracelets; keep them away from the entry slot.
- Keep the device away from aerosol products.
Switch Functions
- ▶️ AUTO: The shredder is ready for use and will automatically start shredding when paper, CDs, or cards are inserted.
- ⏹️ OFF: The shredder is turned off.
- ↩️ REV: The shredder reverses paper to allow its removal.
Operating Instructions
- Place the shredder on a flat surface.
- Plug the device into a suitable power outlet. Ensure the voltage matches the device's requirements.
- Switch to the AUTO position to activate standby mode.
- Insert paper, CDs, or credit cards into the designated slot. Shredding will start automatically.
- After shredding, the device will return to standby mode.
- In case of paper jams, switch to the REV position to reverse the paper.
- Turn the device to OFF after use.
Operating Notes
- Maximum shredding capacity: 12 sheets of A4 paper (80 g/m²) at a time.
- Shred only one credit card ? or one CD/DVD ? at a time.
- Avoid inserting paper clips ?, adhesive tapes, or fabrics into the paper slot to prevent blade damage.
- Regularly empty the waste bin.
Maintenance – Oiling Instructions
To ensure proper operation of the device, follow the oiling procedure below and repeat it twice:
- Move the switch to the REV ↩️ position for 2–3 seconds.
- Apply oil to the input slot area.
- Set the switch to the OFF ⏹️ position.
Note: Regular lubrication of the cutting blades ensures smooth operation and extends the device's lifespan. It is recommended to oil the shredder every time the waste bin is emptied.
Troubleshooting
- Paper hangs at the output after shredding:
- Cause: Paper remnants are stuck between the blades.
- Solution: Switch to REV ↩️ and remove the remnants.
- Paper in the slot, but the shredder does not operate:
- Cause: Paper does not touch the sensor.
- Solution: Adjust the paper's position to touch the sensor.
- Paper jam and device stops operating:
- Cause: Too much paper was inserted.
- Solution: Switch to REV ↩️ to remove the paper.
- Device does not operate or stops intermittently:
- Cause: Paper is too thin, moist, or crumpled.
- Solution: Fold the paper in half and reinsert it into the slot.
