User Manual for PROAIM models including: VCTR-TH Dual Tripod Holder for Camera Cart, VCTR-TH, Dual Tripod Holder for Camera Cart, Dual Tripod Holder, Tripod Holder, Tripod Holder for Camera Cart, Holder for Camera Cart, Tripod for Camera Cart
User Manuals — Proaim.ca
User Manual
Proaim Dual Tripod Holder For Camera Cart
1 Dual Tripod Holder For Camera Cart (VCTR-TH) Assembly Manual What's In The Box Please inspect the contents of your shipped package to ensure you have received everything that is listed below. 38mm (OD) Dia Mast Accessory Cross Bar with Clamp Tripod Holder Bar with Clamp 1 x Pair Tripod Holder 1 x 38mm (ID) Clamp 5mm, 6mm Allen key All rights reserved. No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means, electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright statutes or in writing by the Publisher. 2 Tripod Holder Setup · Remove both the knobs of the 38mm (ID) clamp. · Attach the clamp to the bottom crossbar and secure it properly using both the knobs. · Image showing clamp attached to the crossbar. · Loosen the side clamp knobs of the accessory crossbar and mount the crossbar on the side rods of the cart. · Align the crossbar and secure it by tightening the side clamp knobs. Rod Mounting · Insert the 38mm (OD) mast into the clamp hole on the bottom crossbar. 3 · Tighten the ratchet knob of the top accessory crossbar clamp as shown in the image. · Loosen the ratchet knob and open the clamp on the tripod holder bar. · Mount the tripod holder bar on the 38mm mast and tighten the ratchet knob. Tripod Holder Mounting · Remove the knob of the tripod holder. · Slide and mount the tripod holder on the tripod holder bar. · Repeat the process for the other tripod holder. · Insert and tighten the knob to secure the tripod holder properly. 4 · Both the tripod holders are correctly attached to the cart, as shown in the image. NOTE: Proaim Dual Tripod Holder for Camera Cart is a perfect add-on accessory to carry or store two full-size tripods on the cart. YOUR PROAIM DUAL TRIPOD HOLDER FOR CAMERA CART ALL DRESSED UP AND READY TO GO! (SHOWN WITH OPTIONAL ACCESSORIES) Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts. Warranty doesn't cover transportation costs nor does it cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspection and evaluation by us. Liability: We are not liable for damage caused by products that we do not supply or from mishandling in transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company. Contact Us: In case of any kind of dissatisfaction, please Contact us immediately and we promise our utmost support and care until you use our product.Microsoft Publisher 2019