Soundcore V20i Open Ear Manual
Wearing Instructions
Follow these steps to wear your Soundcore V20i earbuds:
- Insert the earbud into your ear.
- Adjust the earbud for a comfortable and secure fit.
- Ensure the earbud is properly positioned for optimal sound and stability.
Note: Different ear tip sizes may be included for a better fit.
Powering On & Pairing
Powering On:
- Open the charging case with the earbuds inside.
- The earbuds will automatically power on.
Pairing:
- Open the charging case with the earbuds inside.
- The earbuds will automatically enter pairing mode.
- On your device, go to Bluetooth settings and select "Soundcore V20i" to connect.
- Once connected, the indicator light will turn solid blue.
Touch Controls
TWS Mode:
- Play/Pause: Double tap the touch control on either earbud.
- Next Track: Triple tap the touch control on the right earbud.
- Previous Track: Triple tap the touch control on the left earbud.
- Volume Up: Tap and hold the touch control on the right earbud.
- Volume Down: Tap and hold the touch control on the left earbud.
- Activate Voice Assistant: Tap and hold the touch control on either earbud for 2 seconds.
- Customize Controls: Use the Soundcore app to customize touch controls.
Mono Mode:
- Play/Pause: Double tap the touch control.
- Next Track: Triple tap the touch control.
- Activate Voice Assistant: Tap and hold the touch control for 2 seconds.
- Customize Controls: Use the Soundcore app to customize touch controls.
Important Safety Instructions
- Do not disassemble the product.
- Keep out of the reach of children. The product contains small parts which may be a choking hazard.
- The battery shall not be exposed to excessive heat such as sunshine, fire or the like.
- Do not use the product in environments with too high or too low temperatures, and never expose the product to strong sunshine or very wet environments.
- Ensure there is no liquid, sweat or water on the charging port when charging.
- Refer to your user manual for your earphones' waterproof level and follow the corresponding instructions.
- For IPX4: Do not expose earphones to dripping or splashing water.
- For IPX4, IPX5, and IPX6: Do not submerge earphones in water.
Hearing Safety
- To avoid hearing damage, do not listen for extended periods at high volume.
- Do not turn the volume so high that you're unable to hear your surroundings.
- Do not use earphones while driving.
- You should use caution or temporarily discontinue use in potentially hazardous situations.
Battery Warning
- INGESTION HAZARD: This product contains a button cell or coin battery. DEATH or serious injury can occur if ingested. A swallowed button cell or coin battery can cause Internal Chemical Burns in as little as 2 hours. KEEP new and used batteries OUT OF REACH of CHILDREN. Seek immediate medical attention if a battery is suspected to be swallowed or inserted inside any part of the body.
- This product contains non-replaceable batteries (Battery type: Lithium ion battery, battery Nominal voltage: 3.85V). Do not attempt to replace the batteries yourself.
- Even used batteries may cause severe injury or death. Call a local poison control center for treatment information.
- Do not force discharge, recharge, disassemble, heat above manufacturer's specified temperature rating or incinerate. Doing so may result in injury due to venting, leakage or explosion.
Electromagnetic Interference
The product generates stronger permanent magnetic fields that could cause interference with cardiac pacemakers, implanted defibrillators (ICDs) and other implants. Always maintain a distance of at least 3.94"/10 cm between the product component containing the magnet (earbuds and charging case) and the cardiac pacemaker, implanted defibrillator, or other implant.
Disposal and Recycling
This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Follow local rules and never dispose of the product and rechargeable batteries with normal household waste. Correct disposal of old products and rechargeable batteries helps prevent negative consequences for the environment and human health.
This symbol indicates "separate collection" for all batteries and accumulators. Danger of explosion if battery is incorrectly replaced. To reduce risk of fire, explosion or leakage of flammable liquid/gas, don't disassemble, crush, puncture, short external contacts, expose to temperature above 60°C (140°F), sunshine or like, expose to extremely low air pressure or dispose of in fire or water. Replace only with specified batteries.
Declaration of Conformity
Anker Innovations Limited hereby declares that this product is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.soundcore.com
Maximum output power: 9.0dBm
Frequency band: 2.4G band (2.402GHz-2.480GHz)
FCC Statement
This product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The following importer is the responsible party.
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone: +1 (800) 988 7973
IC Notice to Canadian Users
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) L' appareil ne doit pas produire de brouillage; (2) L' appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
CAN ICES-003 (B)/NMB-003 (B)
This Class B digital apparatus complies with Canadian ICES-003. (Cet appareil numérique de la Classe B conforme à la norme NMB-003 du Canada).
Other Languages
This document also contains information in French, German, Spanish, Italian, Japanese, Korean, Chinese, Czech, Danish, Dutch, Finnish, Greek, Hungarian, Lithuanian, Latvian, Polish, Portuguese, Romanian, Russian, Slovak, Slovenian, Swedish, Turkish, Arabic, Hebrew, and Persian.
File Info : application/pdf, 21 Pages, 986.91KB
DocumentDocumentReferences
iLovePDFRelated Documents
![]() |
Soundcore R50i / P20i / P25i True Wireless Earbuds User Manual Comprehensive guide for Soundcore R50i, P20i, and P25i true wireless earbuds, covering setup, charging, pairing, controls, reset, and specifications. |
![]() |
soundcore V20i Earbuds User Manual - Setup, Pairing, and Controls Discover how to set up, pair, charge, and customize your soundcore V20i earbuds. This manual covers app integration, touch controls, sound effects, and troubleshooting. |
![]() |
soundcore V20i Earbuds User Manual and Setup Guide Comprehensive guide for soundcore V20i earbuds, covering app usage, initial and manual pairing, sound effects customization, touch controls, charging procedures, power management, troubleshooting, LED indicators, and firmware updates. Optimize your audio experience with detailed instructions and specifications. |
![]() |
Soundcore Liberty Air 2 User Manual: Your Guide to Wireless Audio This user manual provides detailed instructions for the Soundcore Liberty Air 2 wireless earbuds, covering charging, pairing, controls, app features, and specifications for optimal audio enjoyment. |
![]() |
Soundcore R50i/P20i/P25i Wireless Earbuds User Manual Comprehensive user guide for Soundcore R50i, P20i, and P25i wireless earbuds, covering setup, charging, controls, pairing, firmware updates, and specifications. |
![]() |
Soundcore Liberty 3 Pro User Manual: Setup, Features, and Controls Explore the Soundcore Liberty 3 Pro wireless earbuds with this comprehensive user manual. Learn about charging, fitting, Bluetooth pairing, intuitive controls, the Soundcore app's advanced features like HearID and LDAC, and troubleshooting. Designed for an immersive audio experience. |
![]() |
Soundcore Life P2i User Manual: Wireless Earbuds Guide Comprehensive user manual for Soundcore Life P2i wireless earbuds. Learn about charging, wearing, powering on/off, Bluetooth pairing, controls, reset procedures, and technical specifications for your Soundcore Life P2i. |
![]() |
Soundcore R50i Wireless Earbuds User Manual & Quick Start Guide Comprehensive guide for Soundcore R50i wireless earbuds, covering app setup, pairing, controls, charging, reset, firmware updates, specifications, and customer support. |