Schneider Electric GV2L16 TeSys Deca Manual Starter and Protector
Product Data Sheet
Product name: TeSys Deca Manual Starter and Protector, magnetic circuit protector, rotary handle, 14 A, screw clamp terminals
Device short name: GV2L
Device Application: Motor protection
Trip unit technology: Magnetic
Product availability: Stock - Normally stocked in distribution facility
Main Specifications
| Range | TeSys Deca |
| Product name | TeSys GV2 |
| Product or Component Type | Motor circuit breaker |
| Device short name | GV2L |
| Device Application | Motor protection |
| Trip unit technology | Magnetic |
Complementary Specifications
| Poles description | 3P |
| Network type | AC |
| Utilisation category | Category A IEC 60947-2, AC-3 IEC 60947-4-1, AC-3e IEC 60947-4-1 |
| Network frequency | 50/60 Hz IEC 60947-2 |
| Motor power kW | 5.5 kW 400/415 V AC 50/60 Hz, 7.5 kW 500 V AC 50/60 Hz, 9 kW 690 V AC 50/60 Hz, 11 kW 690 V AC 50/60 Hz |
| Breaking capacity | 100 kA Icu 230/240 V AC 50/60 Hz IEC 60947-2, 50 kA Icu 400/415 V AC 50/60 Hz IEC 60947-2, 20 kA Icu 440 V AC 50/60 Hz IEC 60947-2, 10 kA Icu 500 V AC 50/60 Hz IEC 60947-2, 4 kA Icu 690 V AC 50/60 Hz IEC 60947-2 |
| [Ics] rated service short-circuit breaking capacity | 100% 230/240 V AC 50/60 Hz IEC 60947-2, 50% 400/415 V AC 50/60 Hz IEC 60947-2, 75% 440 V AC 50/60 Hz IEC 60947-2, 75% 500 V AC 50/60 Hz IEC 60947-2, 100% 690 V AC 50/60 Hz IEC 60947-2 |
| Control Type | Rotary handle |
| Line Rated Current | 14 A |
| Magnetic tripping current | 253.4 A |
| [Ith] conventional free air thermal current | 14 A IEC 60947-2 |
| [Ue] rated operational voltage | 690 V AC 50/60 Hz IEC 60947-2 |
| [Ui] rated insulation voltage | 690 V AC 50/60 Hz IEC 60947-2 |
| [Uimp] rated impulse withstand voltage | 6 kV IEC 60947-2 |
| Suitability for isolation | Yes IEC 60947-1 |
Electrical Characteristics
| Power dissipation per pole | 1.8 W |
| Mechanical durability | 100000 cycles |
| Electrical durability | 100000 cycles AC-3 415 V In, 100000 cycles AC-3e 415 V In |
| Rated duty | Uninterrupted IEC 60947-4-1 |
Connections and Terminals
| Connections - terminals | Power circuit screw clamp terminal 2 0.002...0.009 in² (1...6 mm²) solid, Power circuit screw clamp terminal 2 0.002...0.009 in² (1.5...6 mm²) flexible without cable end, Power circuit screw clamp terminal 2 0.002...0.006 in² (1...4 mm²) flexible with cable end |
| Tightening torque | 15.05 lbf.in (1.7 N.m) screw clamp terminal |
Fixing and Mounting
| Fixing mode | 35 mm symmetrical DIN rail clipped, Panel screwed with 2 x M4 screws |
| Mounting position | Horizontal, Vertical |
Dimensions
| Width | 1.8 in (45 mm) |
| Height | 3.5 in (89 mm) |
| Depth | 3.8 in (97 mm) |
| Net Weight | 0.73 lb(US) (0.33 kg) |
| color | Dark grey |
Environment
| Standards | EN/IEC 60947-2, EN/IEC 60947-4-1, UL 60947-4-1, CSA C22.2 No 60947-4-1, IEC/EN 60335-2-40:Annex JJ |
| Product Certifications | CCC, UL, CSA, EAC, LROS (Lloyds register of shipping), BV, RINA, DNV-GL, UKCA, IECEE CB Scheme |
| IK degree of protection | IK04 |
| IP degree of protection | IP20 IEC 60529 |
| Climatic withstand | IACS E10 |
| Ambient Air Temperature for Storage | -40...176 °F (-40...80 °C) |
| Fire resistance | 1760 °F (960 °C) IEC 60695-2-11 |
| Ambient air temperature for operation | -4...140 °F (-20...60 °C) |
| Mechanical robustness | Shocks 30 Gn for 11 ms, Vibrations 5 Gn, 5...150 Hz |
| Operating altitude | <= 6561.68 ft (2000 m) |
Ordering and Shipping Details
| Category | US1011122367 |
| Discount Schedule | 0111 |
| GTIN | 3389110213287 |
Packing Units
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 3.74 in (9.500 cm) |
| Package 1 Width | 3.94 in (10.000 cm) |
| Package 1 Length | 1.97 in (5.000 cm) |
| Package 1 Weight | 11.358 oz (322.000 g) |
| Unit Type of Package 2 | S02 |
| Number of Units in Package 2 | 20 |
| Package 2 Height | 5.91 in (15.000 cm) |
| Package 2 Width | 11.81 in (30.000 cm) |
| Package 2 Length | 15.75 in (40.000 cm) |
| Package 2 Weight | 14.934 lb(US) (6.774 kg) |
Contractual Warranty
| Warranty | 18 months |
Environmental Data
Schneider Electric aims to achieve Net Zero status by 2050 through supply chain partnerships, lower impact materials, and circularity via our ongoing "Use Better, Use Longer, Use Again" campaign to extend product lifetimes and recyclability.
| Environmental footprint | Carbon footprint (kg CO2 eq, Total Life cycle): 8 |
| Environmental Disclosure | Product Environmental Profile |
| Materials and Substances | Packaging made with recycled cardboard: Yes, Packaging without single use plastic: No |
| EU RoHS Directive | Compliant with Exemptions |
| SCIP Number | 04104e70-ba29-493c-b2cc-b5837d1f879b |
| REACH Regulation | REACH Declaration |
| California proposition 65 | WARNING: This product can expose you to chemicals including: Antimony oxide & Antimony trioxide, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov |
| Repack and remanufacture | Circularity Profile: End of Life Information |
| Take-back | No |
| WEEE | The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins. |
Performance Curves
Tripping Curves for GV2L or LE Combined with Thermal Overload Relay LRD or LR2K
Average Operating Times at 20 °C Related to Multiples of the Setting Current
Tripping Curves
1. 3 poles from cold state
2. 2 poles from cold state
3. 3 poles from hot state
Current Limitation on Short-Circuit for GV2L and GV2LE Only (3-Phase 400/415 V)
Dynamic Stress: I peak = f (prospective Isc) at 1.05 Ue = 435 V
Dimensions Drawings
GV2L Dimensions
X1 Electrical clearance = 40 mm for Ue ≤ 415 V, or 80 mm for Ue = 440 V, or 120 mm for Ue = 500 and 690 V. X2 = 40 mm.
GVAD, AM, AN, AU, AS
Block GVAD, AM, AN
Block GVAU, AS
Maximum
GV2AK00
Mounting
On rail AM1 DE200, AM1 ED200 (35 x 15)
Panel mounted
Accessories
On pre-slotted mounting plate AM1 PA
Adapter Plate GK2AF01
7.5 mm Height Compensation Plate GV1F03
Mounting of External Operator GV2APN01, GV2APN02 or GV2APN04 for Motor Circuit Breakers GV2L
Door cut-out
Mounting of External Operator GVAPH02 for Motor Circuit Breakers GV2L
Door cut-out
GV2L and GV2LE
Sets of busbars GV2G445, GV2G454, GV2G472, with terminal block GV2G05
| l | p | |
| GV2G445 (4 x 45 mm) | 179 | 45 |
| GV2G454 (4 x 54 mm) | 206 | 54 |
| GV2G472 (4 x 72 mm) | 260 | 72 |
Sets of busbars GV2G245, GV2G254, GV2GR272
| GV2G245 (2 x 45 mm) | 89 |
| GV2G254 (2 x 54 mm) | 98 |
| GV2G272 (2 x 72 mm) | 116 |
Set of busbars GV2G554
Sets of busbars GV2G345 and GV2G354
| GV2G345 (3 x 45 mm) | 134 |
| GV2G354 (3 x 54 mm) | 152 |
Connections and Schema
GV2L..
Product benefits / Features
TeSys Deca Motor Circuit Breakers
Technical Benefits
- High breaking capacity up to 100 kA
- Screw clamp for the connection, with lug and spring terminals.
- Easily identify the tripped breaker.
- Padlockable in all versions.
- Sealable thermal overload settings without additional accessories.
- Short circuit indication for better diagnostics when a trip occurs.
- Maximum 15 current ratings to cover from 0.1 A to 32 A motor current with a IP20 level for finger safety.
TeSys Deca Motor Circuit Breakers
- Universal Integration: Can be used for all type of applications across industry, infrastructure and buildings.
- Complete protection: Provide short circuit protection, overload protection, motor (ON/OFF) control, all in a single product.
- Standard Sync: Compliant to motor control and protection, in accordance with standards.
TeSys Deca Motor Circuit Breakers
Range Accessories
Auxiliary contact blocks, Energy Sensor, Terminal block, Combination block, Current limiter, Comb busbar, Extended rotary handle
